Goodman, offered by Manor Heat and Air, is a trusted name in home comfort, delivering energy-efficient, durable HVAC equipment for homes in Manor, TX. This component is engineered to integrate cleanly with compatible Goodman systems for reliable, efficient performance. What's Included: Goodman AMST60DU1300 Air Handler: Goodman AMST energy-efficient, multi-position, multi-speed ECM air handler with a factory-installed TXV, all-aluminum evaporator coil, optimized for pairing with single-stage AC or heat-pump condensers. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Air Handler Kit Electrical & mounting disconnect, A/C whip, condenser pad Electric heat kit factory-matched heat strip, field-installed and wired to OEM spec Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, your technician will note it on your estimate before work begins. SPECIFICATIONS Model AMST60DU1300 BTU Capacity 60K Blower Constant Cabinet D Warranty 10-Year Parts (When Registered with OEM) RESOURCES Air Handler LIMITED WARRANTY SPEC SHEET

Read more less

Goodman, offered by Manor Heat and Air, is a trusted name in home comfort, delivering energy-efficient, durable HVAC equipment for homes in Manor, TX. This component is engineered to integrate cleanly with compatible Goodman systems for reliable, efficient performance. What's Included: Goodman AMST48CU1300 Air Handler: Goodman AMST energy-efficient, multi-position, multi-speed ECM air handler with a factory-installed TXV, all-aluminum evaporator coil, optimized for pairing with single-stage AC or heat-pump condensers. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Air Handler Kit Electrical & mounting disconnect, A/C whip, condenser pad Electric heat kit factory-matched heat strip, field-installed and wired to OEM spec Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, your technician will note it on your estimate before work begins. SPECIFICATIONS Model AMST48CU1300 BTU Capacity 48K Blower Constant Cabinet C Warranty 10-Year Parts (When Registered with OEM) RESOURCES Air Handler LIMITED WARRANTY SPEC SHEET

Read more less

Goodman, offered by Manor Heat and Air, is a trusted name in home comfort, delivering energy-efficient, durable HVAC equipment for homes in Manor, TX. This component is engineered to integrate cleanly with compatible Goodman systems for reliable, efficient performance. What's Included: Goodman AMST36CU1300 Air Handler: Goodman AMST energy-efficient, multi-position, multi-speed ECM air handler with a factory-installed TXV, all-aluminum evaporator coil, optimized for pairing with single-stage AC or heat-pump condensers. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Air Handler Kit Electrical & mounting disconnect, A/C whip, condenser pad Electric heat kit factory-matched heat strip, field-installed and wired to OEM spec Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, your technician will note it on your estimate before work begins. SPECIFICATIONS Model AMST36CU1300 BTU Capacity 36K Blower Constant Cabinet C Warranty 10-Year Parts (When Registered with OEM) RESOURCES Air Handler LIMITED WARRANTY SPEC SHEET

Read more less

Goodman, offered by Manor Heat and Air, is a trusted name in home comfort, delivering energy-efficient, durable HVAC equipment for homes in Manor, TX. This component is engineered to integrate cleanly with compatible Goodman systems for reliable, efficient performance. What's Included: Goodman AMST42CU1300 Air Handler: Goodman AMST energy-efficient, multi-position, multi-speed ECM air handler with a factory-installed TXV, all-aluminum evaporator coil, optimized for pairing with single-stage AC or heat-pump condensers. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Air Handler Kit Electrical & mounting disconnect, A/C whip, condenser pad Electric heat kit factory-matched heat strip, field-installed and wired to OEM spec Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, your technician will note it on your estimate before work begins. SPECIFICATIONS Model AMST42CU1300 BTU Capacity 42K Blower Constant Cabinet C Warranty 10-Year Parts (When Registered with OEM) RESOURCES Air Handler LIMITED WARRANTY SPEC SHEET

Read more less

Goodman, offered by Manor Heat and Air, is a trusted name in home comfort, delivering energy-efficient, durable HVAC equipment for homes in Manor, TX. This component is engineered to integrate cleanly with compatible Goodman systems for reliable, efficient performance. What's Included: Goodman AMVT30BP1300 Air Handler: Goodman AMVT multi-position, variable-speed ECM air handler with an all-aluminum coil, ComfortBridge technology, and a factory-installed TXV, compatible with Goodman communicating heat pump and AC systems. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Air Handler Kit Electrical & mounting disconnect, A/C whip, condenser pad Electric heat kit factory-matched heat strip, field-installed and wired to OEM spec Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, your technician will note it on your estimate before work begins. SPECIFICATIONS Model AMVT30BP1300 Blower Variable Speed Cabinet B Warranty 10-Year Parts (When Registered with OEM) RESOURCES Air Handler LIMITED WARRANTY SPEC SHEET

Read more less

Goodman, offered by Manor Heat and Air, is a trusted name in home comfort, delivering energy-efficient, durable HVAC equipment for homes in Manor, TX. This component is engineered to integrate cleanly with compatible Goodman systems for reliable, efficient performance. What's Included: Goodman AMST24BU1300 Air Handler: Goodman AMST energy-efficient, multi-position, multi-speed ECM air handler with a factory-installed TXV, all-aluminum evaporator coil, optimized for pairing with single-stage AC or heat-pump condensers. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Air Handler Kit Electrical & mounting disconnect, A/C whip, condenser pad Electric heat kit factory-matched heat strip, field-installed and wired to OEM spec Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, your technician will note it on your estimate before work begins. SPECIFICATIONS Model AMST24BU1300 BTU Capacity 24K Blower Constant Cabinet B Warranty 10-Year Parts (When Registered with OEM) RESOURCES Air Handler LIMITED WARRANTY SPEC SHEET

Read more less

Goodman, offered by Manor Heat and Air, is a trusted name in home comfort, delivering energy-efficient, durable HVAC equipment for homes in Manor, TX. This component is engineered to integrate cleanly with compatible Goodman systems for reliable, efficient performance. What's Included: Goodman AMST30BU1300 Air Handler: Goodman AMST energy-efficient, multi-position, multi-speed ECM air handler with a factory-installed TXV, all-aluminum evaporator coil, optimized for pairing with single-stage AC or heat-pump condensers. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Air Handler Kit Electrical & mounting disconnect, A/C whip, condenser pad Electric heat kit factory-matched heat strip, field-installed and wired to OEM spec Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, your technician will note it on your estimate before work begins. SPECIFICATIONS Model AMST30BU1300 BTU Capacity 30K Blower Constant Cabinet B Warranty 10-Year Parts (When Registered with OEM) RESOURCES Air Handler LIMITED WARRANTY SPEC SHEET

Read more less

What's Included: The Lennox CBK45UHPT air handler offered by Manor Heat and Air is a high-performance component designed to improve residential HVAC systems by providing efficient, reliable air circulation. Built with advanced technology and durable materials, it ensures optimal indoor satisfaction and integrates seamlessly with compatible Lennox heat pumps or air conditioners. Its features offer energy-efficient, dependable climate control. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Air Handler Kit Drainage & safety secondary drain pan, float switch, P-trap Refrigerant line bi-flow filter drier, ArmaFlex insulation PVC fittings couplings, elbows, adapters for condensate line Not Included This listing covers the equipment and typical installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: Enhanced Efficiency: Designed to conserve energy and lower utility bills while maintaining consistent satisfaction. Sturdy Build: Made from durable materials to withstand regular use and extend system life. ComfortSync® Compatibility: Works with Lennox's smart thermostat system for precise temperature control and energy monitoring. Compact Footprint: Fits easily in various home layouts, including tight spaces. Quiet Operation: Includes noise-reduction technology for a peaceful indoor environment. The Lennox CBK45UHPT air handler offered by Manor Heat and Air is ideal for homeowners seeking advanced performance and efficiency. When paired with a Lennox heat pump or air conditioner, it creates a reliable, year-round comfort system. Air Handler Model CBK45UHPT-018 Heat Kit Model ECB45-10CB Capacity (BTU) 18K Motor Three-Speed Configuration Upflow/Horizontal Refrigerant R-454B (with Refrigerant Detection System) Heat Source Electric Warranty 10 Year Parts, 10 Year Air Handler (When Registered with OEM) RESOURCES Air Handler LIMITED WARRANTY PRODUCT BROCHURE We provide quality HVAC equipment, parts, and accessories for residential and light commercial heating, cooling, and ventilation systems. With a wide selection of trusted brands and expert support, we simplify your HVAC needs by delivering reliable products and solutions for installation

Read more less

What's Included: The Lennox CBK45UHPT air handler offered by Manor Heat and Air is a high-performance unit designed to improve residential HVAC systems by providing efficient, reliable air circulation. Built with advanced technology and durable materials, it ensures optimal indoor comfort and integrates seamlessly with compatible Lennox heat pumps or air conditioners. Its features offer resources-efficient, dependable climate control. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Air Handler Kit Drainage & safety secondary drain pan, float switch, P-trap Refrigerant line bi-flow filter drier, ArmaFlex insulation PVC fittings couplings, elbows, adapters for condensate line Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, installation, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: Enhanced Efficiency: Saves energy to reduce utility bills while maintaining consistent comfort. Sturdy Build: Made from durable materials for long-lasting functionality. ComfortSync® Compatibility: Works with Lennox smart thermostats for precise temperature control and energy monitoring. Compact Footprint: Fits easily in various house layouts, even with limited space. Quiet Operation: Includes noise-reduction technology for a peaceful indoor environment. The Lennox CBK45UHPT air handler offered by Manor Heat and Air is ideal for homeowners seeking efficient, reliable HVAC performance. Pair it with a Lennox heat pump or air conditioner for year-round comfort. Air Handler Model CBK45UHPT-024 Heat Kit Model ECB45-10CB Capacity (BTU) 24K Motor Three-Speed Configuration Upflow/Horizontal Refrigerant R-410A or R-454B (with Refrigerant Detection System) Heat Source Electric Warranty 10 Year Parts, 10 Year Air Handler (When Registered with OEM) RESOURCES Air Handler LIMITED WARRANTY PRODUCT BROCHURE We provide quality HVAC equipment, parts, and accessories for residential and light commercial heating, cooling, and ventilation systems. With trusted brands and expert support, we simplify your HVAC needs by delivering reliable products and solutions for installation and maintenance. We also offer professional installation services in

Read more less

What's Included: The Lennox CBK45UHPT air handler offered by Manor Heat and Air is a high-performance component designed to improve residential HVAC systems by providing optimized, reliable air circulation. Built with advanced technology and durable materials, it ensures optimal indoor comfort and integrates seamlessly with compatible Lennox heat pumps or air conditioners. Its features offer energy-efficient, dependable climate control. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Mounting of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Air Handler Kit Drainage & safety secondary drain pan, float switch, P-trap Refrigerant line bi-flow filter drier, ArmaFlex insulation PVC fittings couplings, elbows, adapters for condensate line Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing supplementary is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM pieces warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: Enhanced Efficiency: Saves energy to lower utility bills while maintaining consistent comfort. Sturdy Build: Made from durable materials to withstand regular use and extend system life. ComfortSync® Compatibility: Works with Lennox smart thermostats for precise temperature control and energy monitoring. Compact Footprint: Fits easily in various home layouts, even with limited space. Quiet Operation: Includes noise-reduction technology for a peaceful indoor environment. The Lennox CBK45UHPT air handler offered by Manor Heat and Air is ideal for homeowners seeking efficient, dependable HVAC performance. Pair it with a Lennox heat pump or air conditioner for year-round comfort and dependability. Air Handler Model CBK45UHPT-030 Heat Kit Model ECB45-10CB Capacity (BTU) 30K Motor Three-Speed Configuration Upflow/Horizontal Refrigerant R-454B (with Refrigerant Detection System) Heat Source Electric Warranty 10 Year Parts, 10 Year Air Handler (When Registered with OEM) RESOURCES Air Handler LIMITED WARRANTY PRODUCT BROCHURE We provide high-quality HVAC equipment, parts, and accessories for residential and light commercial heating, cooling, and ventilation systems. With a wide selection of trusted brands and expert customer support, we simplify your HVAC needs by delivering reliable products and solutions for installation and

Read more less

What's Included: The Lennox CBK45UHPT air handler offered by Manor Heat and Air is a high-performance unit designed to improve residential HVAC systems by providing efficient, reliable air circulation. Built with advanced technology and durable materials, it ensures optimal indoor comfort and integrates seamlessly with compatible Lennox heat pumps or air conditioners. Its features offer energy-efficient, dependable climate control. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Air Handler Kit Drainage & safety secondary drain pan, float switch, P-trap Refrigerant line bi-flow filter drier, ArmaFlex insulation PVC fittings couplings, elbows, adapters for condensate line Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (basic composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after deployment If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: Enhanced Efficiency: Saves resources to reduce utility bills while maintaining comfort. Sturdy Build: Made from durable materials for long system life. ComfortSync® Compatibility: Works with Lennox smart thermostats for precise temperature and energy monitoring. Compact Footprint: Fits easily in various home layouts, even with limited space. Quiet Operation: Includes noise-reduction technology for a peaceful environment. The Lennox CBK45UHPT air handler offered by Manor Heat and Air is ideal for homeowners seeking advanced performance and efficiency. When paired with a Lennox heat pump or air conditioner, it delivers year-round comfort and reliability. Air Handler Model CBK45UHPT-036 Heat Kit Model ECB45-10CB Capacity (BTU) 36K Motor Three-Speed Configuration Upflow/Horizontal Refrigerant R-454B (with Refrigerant Detection System) Heat Source Electric Warranty 10 Year Parts, 10 Year Air Handler (When Registered with OEM) RESOURCES Air Handler LIMITED WARRANTY PRODUCT BROCHURE We provide quality HVAC equipment, parts, and accessories for residential and light commercial heating, cooling, and ventilation. With trusted brands and professional support, we simplify your HVAC needs by delivering reliable products and solutions for installation and maintenance. We also offer professional installation services in select areas for a smooth

Read more less

What's Included: The Lennox CBK45UHPT air handler offered by Manor Heat and Air is a high-performance unit engineered to improve residential HVAC systems by providing efficient, reliable air circulation. Built with advanced technology and durable materials, it ensures optimal indoor comfort and integrates seamlessly with compatible Lennox heat pumps or air conditioners. Its features offer energy-efficient, dependable climate control. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a execute setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Air Handler Kit Drainage & safety secondary drain pan, float switch, P-trap Refrigerant line bi-flow filter drier, ArmaFlex insulation PVC fittings couplings, elbows, adapters for condensate line Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line setup Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: Improved Efficiency: Saves energy to reduce utility bills while maintaining consistent comfort. Sturdy Build: Made from durable materials to withstand regular use and extend system life. ComfortSync® Compatibility: Works with Lennox smart thermostats for precise temperature control and energy monitoring. Compact Footprint: Fits easily in various home layouts, even with limited space. Quiet Operation: Includes noise-reduction technology for a peaceful indoor environment. The Lennox CBK45UHPT air handler offered by Manor Heat and Air is ideal for homeowners seeking efficient, reliable HVAC performance. Pair it with a Lennox heat pump or air conditioner for year-round comfort and dependability. Air Handler Model CBK45UHPT-042 Heat Kit Model ECB45-15CB Capacity (BTU) 42K Motor Three-Speed Configuration Upflow/Horizontal Refrigerant R-454B (with Refrigerant Detection System) Heat Source Electric Warranty 10 Year Parts, 10 Year Air Handler (When Registered with OEM) RESOURCES Air Handler LIMITED WARRANTY PRODUCT BROCHURE We provide quality HVAC equipment, units, and accessories for residential and light commercial heating, cooling, and ventilation. With trusted brands and expert support, we simplify your HVAC needs by offering reliable products and solutions for installation and maintenance. We also provide professional installation

Read more less

What's Included: The Lennox CBK45UHVT air handler offered by Manor Heat and Air is a high-efficiency, variable-speed unit designed to optimize airflow and indoor comfort. Built with advanced technology and durable materials, it integrates with Lennox heat pumps or air conditioners to deliver consistent, energy-efficient performance. Its variable-speed motor improves temperature control, reduces humidity, and operates quietly, making it a premium choice for residential HVAC systems. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Air Handler Kit Drainage & safety secondary drain pan, float switch, P-trap Refrigerant line bi-flow filter drier, ArmaFlex insulation PVC fittings couplings, elbows, adapters for condensate line Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and furnish a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: Variable-Speed Motor Adjusts airflow for better efficiency, comfort, and quieter operation. Energy-Efficient Performance Lowers energy use while maintaining steady indoor temperatures. ComfortSync® Compatibility Works with Lennox s smart thermostat unit for precise climate control and resources savings. Robust Construction Made with high-quality materials for long-lasting reliability. Flexible Installation Compact design fits various home layouts easily. The Lennox CBK45UHVT air handler offered by Manor Heat and Air is an ideal solution for homeowners seeking advanced comfort, energy savings, and quiet function. Paired with a Lennox heat pump or air conditioner, it forms a complete HVAC system for year-round efficiency and performance. Air Handler Model CBK45UHVT-018 Heat Kit Model ECB45-10CB Capacity (BTU) 18K Motor Variable-Speed Configuration Upflow / Downflow / Horizontal Refrigerant R-454B (with Refrigerant Detection System) Heat Source Electric Warranty 10 Year Parts, 10 Year Air Handler (When Registered with OEM) RESOURCES Air Handler LIMITED WARRANTY PRODUCT SPECIFICATIONS

Read more less

What's Included: The Lennox CBK45UHVT air handler offered by Manor Heat and Air is a high-efficiency, variable-speed unit designed to optimize airflow and indoor comfort. Built with advanced technology and durable materials, it integrates with Lennox heat pumps or air conditioners to deliver consistent, energy-efficient performance. Its variable-speed motor improves temperature control, reduces humidity, and operates quietly, making it a premium choice for residential HVAC systems. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Air Handler Kit Drainage & safety secondary drain pan, float switch, P-trap Refrigerant line bi-flow filter drier, ArmaFlex insulation PVC fittings couplings, elbows, adapters for condensate line Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any supplementary work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: Variable-Speed Motor Adjusts airflow for better efficiency, comfort, and quieter operation. Energy-Efficient Operation Lowers energy use while maintaining consistent indoor temperatures. ComfortSync® Compatibility Works with Lennox s smart thermostat system for precise climate control and energy savings. Robust Construction Made with top-grade materials for long-lasting reliability. Flexible Installation Compact design fits various home layouts easily. The Lennox CBK45UHVT air handler offered by Manor Heat and Air is an ideal solution for homeowners seeking advanced comfort, energy savings, and quiet operation. Paired with a Lennox heat pump or air conditioner, it forms a complete HVAC system for year-round efficiency and performance. Air Handler Model CBK45UHVT-030 Heat Kit Model ECB45-10CB Capacity (BTU) 30K Motor Variable-Speed Configuration Upflow / Downflow / Horizontal Refrigerant R-454B (with Refrigerant Detection System) Heat Source Electric Warranty 10 Year Parts, 10 Year Air Handler (When Registered with OEM) RESOURCES Air Handler LIMITED WARRANTY PRODUCT SPECIFICATIONS

Read more less

What's Included: The Lennox CBK45UHVT air handler offered by Manor Heat and Air is a high-efficiency, variable-speed unit designed to optimize airflow and indoor comfort. Built with advanced technology and durable materials, it integrates with Lennox heat pumps or air conditioners to deliver consistent, energy-efficient performance. Its variable-speed motor improves temperature control, reduces humidity, and operates quietly, making it a premium choice for residential HVAC systems. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included components Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Air Handler Kit Drainage & safety secondary drain pan, float switch, P-trap Refrigerant line bi-flow filter drier, ArmaFlex insulation PVC fittings couplings, elbows, adapters for condensate line Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after setup If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: Variable-Speed Motor Adjusts airflow for better efficiency, comfort, and quieter operation. Fuel-Efficient Performance Lowers energy use while maintaining consistent indoor temperatures. ComfortSync® Compatibility Works with Lennox s smart thermostat system for precise climate control and energy savings. Durable Construction Made with high-quality materials for long-lasting reliability. Flexible Installation Compact design fits various home layouts easily. The Lennox CBK45UHVT air handler offered by Manor Heat and Air is an ideal solution for homeowners seeking advanced comfort, fuel savings, and quiet operation. Paired with a Lennox heat pump or air conditioner, it forms a complete HVAC system for year-round efficiency and performance. Air Handler Model CBK45UHVT-036 Heat Kit Model ECB45-10CB Capacity (BTU) 36K Motor Variable-Speed Configuration Upflow / Downflow / Horizontal Refrigerant R-454B (with Refrigerant Detection System) Heat Source Electric Warranty 10 Year Parts, 10 Year Air Handler (When Registered with OEM) RESOURCES Air Handler LIMITED WARRANTY PRODUCT SPECIFICATIONS

Read more less

What's Included: The Lennox CBK45UHVT air handler offered by Manor Heat and Air is a high-efficiency, variable-speed unit designed to optimize airflow and indoor comfort. Built with advanced technology and long-lasting materials, it integrates with Lennox heat pumps or air conditioners to deliver consistent, energy-efficient performance. Its variable-speed motor improves temperature control, reduces humidity, and functions quietly, making it a premium choice for residential HVAC systems. Includes licensed and insured HVAC mounting by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Air Handler Kit Drainage & safety secondary drain pan, float switch, P-trap Refrigerant line bi-flow filter drier, ArmaFlex insulation PVC fittings couplings, elbows, adapters for condensate line Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (conventional composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after fitting If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: Variable-Speed Motor Adjusts airflow for better efficiency, comfort, and quieter operation. Energy-Efficient Performance Lowers energy use while maintaining consistent indoor temperatures. ComfortSync® Compatibility Works with Lennox s smart thermostat system for precise climate control and energy savings. Durable Construction Made with high-quality materials for long-lasting reliability. Flexible Installation Compact design fits various home layouts easily. The Lennox CBK45UHVT air handler offered by Manor Heat and Air is an ideal solution for homeowners seeking advanced comfort, energy savings, and quiet operation. Paired with a Lennox heat pump or air conditioner, it forms a complete HVAC system for year-round efficiency and performance. Air Handler Model CBK45UHVT-042 Heat Kit Model ECB45-15CB Capacity (BTU) 42K Motor Variable-Speed Configuration Upflow / Downflow / Horizontal Refrigerant R-454B (with Refrigerant Detection System) Heat Source Electric Warranty 10 Year Parts, 10 Year Air Handler (When Registered with OEM) RESOURCES Air Handler LIMITED WARRANTY

Read more less

What's Included: The Lennox CBK45UHVT air handler offered by Manor Heat and Air is a high-efficiency, variable-speed unit designed to optimize airflow and indoor comfort. Built with advanced technology and durable materials, it integrates with Lennox heat pumps or air conditioners to deliver consistent, energy-efficient performance. Its variable-speed motor improves temperature control, reduces humidity, and operates quietly, making it a premium choice for residential HVAC systems. Includes licensed and insured HVAC mounting by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Air Handler Kit Drainage & safety secondary drain pan, float switch, P-trap Refrigerant line bi-flow filter drier, ArmaFlex insulation PVC fittings couplings, elbows, adapters for condensate line Not Included This listing covers the equipment and standard setup scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: Variable-Speed Motor Adjusts airflow for better efficiency, comfort, and quieter operation. Power-Efficient Functionality Lowers energy use while maintaining steady indoor temperatures. ComfortSync® Compatibility Works with Lennox s smart thermostat system for precise climate control and energy savings. Durable Construction Made with high-quality materials for long-lasting reliability. Flexible Installation Compact design fits various home layouts easily. The Lennox CBK45UHVT air handler offered by Manor Heat and Air is an ideal solution for homeowners seeking advanced comfort, energy savings, and quiet operation. Paired with a Lennox heat pump or air conditioner, it forms a execute HVAC system for year-round efficiency and performance. Air Handler Model CBK45UHVT-048 Heat Kit Model ECB45-15CB Capacity (BTU) 48K Motor Variable-Speed Configuration Upflow / Downflow / Horizontal Refrigerant R-454B (with Refrigerant Detection System) Heat Source Electric Warranty 10 Year Parts, 10 Year Air Handler (When Registered with OEM) RESOURCES Air Handler LIMITED WARRANTY PRODUCT SPECIFICATIONS

Read more less

What's Included: The Lennox CBK45UHVT air handler offered by Manor Heat and Air is a high-efficiency, variable-speed unit designed to optimize airflow and indoor comfort. Built with advanced technology and durable materials, it integrates with Lennox heat pumps or air conditioners to deliver consistent, energy-efficient performance. Its variable-speed motor improves temperature control, reduces humidity, and functions quietly, making it a premium choice for residential HVAC systems. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included pieces Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Air Handler Kit Drainage & safety secondary drain pan, float switch, P-trap Refrigerant line bi-flow filter drier, ArmaFlex insulation PVC fittings couplings, elbows, adapters for condensate line Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line fitting Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: Variable-Speed Motor Adjusts airflow for better efficiency, comfort, and quieter operation. Energy-Efficient Performance Lowers energy use while maintaining consistent indoor temperatures. ComfortSync® Compatibility Works with Lennox s smart thermostat system for precise climate control and power savings. Durable Construction Made with high-excellent materials for long-lasting reliability. Flexible Installation Compact design fits various home layouts easily. The Lennox CBK45UHVT air handler offered by Manor Heat and Air is an ideal solution for homeowners seeking advanced comfort, energy savings, and quiet operation. Paired with a Lennox heat pump or air conditioner, it forms a complete HVAC system for year-round efficiency and performance. Air Handler Model CBK45UHVT-060 Heat Kit Model ECB45-20CB Capacity (BTU) 60K Motor Variable-Speed Configuration Upflow / Downflow / Horizontal Refrigerant R-454B (with Refrigerant Detection System) Heat Source Electric Warranty 10 Year Parts, 10 Year Air Handler (When Registered with OEM) RESOURCES Air Handler LIMITED WARRANTY PRODUCT SPECIFICATIONS

Read more less

What's Included: The Lennox CBK45UHVT air handler offered by Manor Heat and Air is a high-efficiency, variable-speed unit designed to maximize airflow and indoor comfort. Built with advanced technology and durable materials, it integrates with Lennox heat pumps or air conditioners to supply consistent, energy-efficient performance. Its variable-speed motor improves temperature control, reduces humidity, and operates quietly, making it a premium choice for residential HVAC systems. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full configuration start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Air Handler Kit Drainage & safety secondary drain pan, float switch, P-trap Refrigerant line bi-flow filter drier, ArmaFlex insulation PVC fittings couplings, elbows, adapters for condensate line Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: Variable-Speed Motor Adjusts airflow for better efficiency, comfort, and quieter operation. Energy-Efficient Performance Lowers fuel use while maintaining consistent indoor temperatures. ComfortSync® Compatibility Works with Lennox s smart thermostat for precise climate control and energy savings. Durable Construction Made with high-quality materials for long-lasting reliability. Flexible Installation Compact design fits various home layouts easily. The Lennox CBK45UHVT air handler offered by Manor Heat and Air is an ideal solution for homeowners seeking advanced comfort, energy savings, and quiet operation. Paired with a Lennox heat pump or air conditioner, it forms a finalize HVAC system for year-round efficiency and performance. Air Handler Model CBK45UHVT-024 Heat Kit Model ECB45-10CB Capacity (BTU) 24K Motor Variable-Speed Configuration Upflow / Downflow / Horizontal Refrigerant R-454B (with Refrigerant Detection System) Heat Source Electric Warranty 10 Year Parts, 10 Year Air Handler (When Registered with OEM) RESOURCES Air Handler LIMITED WARRANTY PRODUCT SPECIFICATIONS

Read more less

What's Included: The RunTru A5AHV air handler offered by Manor Heat and Air delivers advanced performance and energy efficiency for residential HVAC systems. Its variable-speed blower motor provides precise temperature control and comfort by adjusting airflow to your home s needs. Built with durable materials and a compact design, the A5AHV ensures reliable year-round climate control. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Setup of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Air Handler Kit Drainage & safety secondary drain pan, float switch, P-trap Refrigerant line bi-flow filter drier, ArmaFlex insulation PVC fittings couplings, elbows, adapters for condensate line Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, substitution, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line deployment Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: Variable-Speed Blower: Provides consistent, efficient airflow for better comfort and energy savings. Energy-Conscious Design: Optimizes system performance and reduces utility costs. Durable Construction: Built for long-lasting use and low maintenance. Compact Size: Fits easily into tight installation spaces. Quiet Operation: Minimizes noise for a peaceful indoor environment. When paired with a compatible RunTru heat pump or air conditioner, the RunTru A5AHV air handler creates a perform HVAC system that delivers dependable comfort and energy efficiency. Air Handler Model A5AHV006A1D30A Heat Kit Model BAYHTR1510BRKC Capacity (BTU) 36K-60K Stages Variable Cabinet Size D Refrigerant R-454B Heat Source Electric Warranty 10 Year Parts, 10 Year Air Handler (When Registered with OEM) RESOURCES Air Handler LIMITED WARRANTY PRODUCT SPECS We provide quality HVAC equipment, parts, and accessories for residential and light commercial heating, cooling, and ventilation. With trusted brands and expert support, we simplify your HVAC needs by offering reliable products and solutions. We also provide Professional Installation services in select areas for a seamless experience from purchase to operation.<

Read more less

What's Included: The RunTru A5AHV air handler offered by Manor Heat and Air delivers advanced performance and energy efficiency for residential HVAC systems. Its variable-speed blower motor provides precise temperature control and comfort by adjusting airflow to your home s needs. Built with durable materials and a compact design, the A5AHV ensures reliable year-round climate control. Includes licensed and insured HVAC setup by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Air Handler Kit Drainage & safety secondary drain pan, float switch, P-trap Refrigerant line bi-flow filter drier, ArmaFlex insulation PVC fittings couplings, elbows, adapters for condensate line Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: Variable-Speed Blower: Provides consistent, efficient airflow for better convenience and energy savings. Energy-Conscious Design: Optimizes system performance and reduces utility costs. Durable Construction: Built for long-lasting performance and low maintenance. Compact Size: Fits tight installation spaces for flexibility. Quiet Operation: Minimizes noise for a peaceful indoor environment. Paired with a compatible RunTru heat pump or air conditioner, the A5AHV forms a complete HVAC system for dependable comfort and energy efficiency. Air Handler Model A5AHV007A1D30A Heat Kit Model BAYHTR1510BRKC Capacity (BTU) 42K-60K Stages Variable Cabinet Size D Refrigerant R-454B Heat Source Electric Warranty 10 Year Parts, 10 Year Air Handler (When Registered with OEM) RESOURCES Air Handler LIMITED WARRANTY PRODUCT SPECS We offer quality HVAC equipment, components, and accessories for residential and light commercial heating, cooling, and ventilation. With trusted brands and expert support, we simplify HVAC deployment and maintenance. We also offer professional installation services in select areas for a smooth purchase-to-operation experience.

Read more less

What's Included: The RunTru A5AHC air handler offered by Manor Heat and Air is a reliable, efficient solution for residential HVAC systems, providing consistent air circulation and optimized indoor comfort. Designed for superior and affordability, it delivers durable performance and integrates smoothly with compatible heat pumps or air conditioners. Its compact design suits homes with limited installation space. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Air Handler Kit Drainage & safety secondary drain pan, float switch, P-trap Refrigerant line bi-flow filter drier, ArmaFlex insulation PVC fittings couplings, elbows, adapters for condensate line Not Included This listing covers the equipment and standard fitting scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and offer a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: Efficient Airflow: Distributes conditioned air evenly for consistent home comfort. Durable Construction: Built to resist wear and ensure long-lasting reliability. Energy-Conscious Operation: Improves system efficiency and lowers energy costs. Compact Design: Fits various mounting spaces, offering flexible placement. Quiet Performance: Operates smoothly to maintain a peaceful indoor environment. The RunTru A5AHC air handler balances affordability, performance, and efficiency. Paired with a RunTru heat pump or air conditioner, it provides a complete HVAC solution for reliable year-round comfort. Air Handler Model A5AHC006A1D30A Heat Kit Model BAYHTR1510BRKC Capacity (BTU) 36K-48K Stages Single Cabinet Size D Refrigerant R-454B Heat Source Electric Warranty 10 Year Parts, 10 Year Air Handler (When Registered with OEM) RESOURCES Air Handler LIMITED WARRANTY PRODUCT SPECS We provide high-quality HVAC equipment, parts, and accessories for residential and light commercial heating, cooling, and ventilation systems. With a wide selection of trusted brands and expert support, we simplify your HVAC needs by delivering reliable products and solutions for installation and maintenance. We

Read more less

What's Included: The RunTru A5AHV air handler offered by Manor Heat and Air delivers advanced performance and energy efficiency for residential HVAC systems. Its variable-speed blower motor provides precise temperature control and adjusts airflow to your home s needs. Built with durable materials and a compact design, the A5AHV ensures reliable year-round climate control. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included pieces Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Air Handler Kit Drainage & safety secondary drain pan, float switch, P-trap Refrigerant line bi-flow filter drier, ArmaFlex insulation PVC fittings couplings, elbows, adapters for condensate line Not Included This listing covers the equipment and conventional installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: Variable-Speed Blower: Provides consistent, efficient airflow for better comfort and energy savings. Energy-Conscious Design: Optimizes system performance and reduces utility costs. Durable Construction: Built for long-lasting use and low maintenance. Compact Size: Fits easily into tight installation spaces. Quiet Performance: Minimizes noise for a peaceful indoor environment. When paired with a compatible RunTru heat pump or air conditioner, the A5AHV forms a complete HVAC setup that delivers dependable comfort and energy efficiency. Air Handler Model A5AHV005A1D30A Heat Kit Model BAYHTR1508BRKC Capacity (BTU) 24K-42K Stages Variable Cabinet Size D Refrigerant R-454B Heat Source Electric Warranty 10 Year Parts, 10 Year Air Handler (When Registered with OEM) RESOURCES Air Handler LIMITED WARRANTY PRODUCT SPECS We provide quality HVAC equipment, components, and accessories for residential and light commercial heating, cooling, and ventilation systems. With trusted brands and expert support, we simplify your HVAC needs by delivering reliable products and solutions. We also offer professional installation services in select areas for a seamless experience from purchase to operation.

Read more less

What's Included: The RunTru A5AHV air handler offered by Manor Heat and Air delivers advanced performance and resources efficiency for residential HVAC systems. Its variable-speed blower motor provides precise temperature control and adjusts airflow to your dwelling s needs. Built with durable materials and a compact design, the A5AHV ensures reliable year-round climate control. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Air Handler Kit Drainage & safety secondary drain pan, float switch, P-trap Refrigerant line bi-flow filter drier, ArmaFlex insulation PVC fittings couplings, elbows, adapters for condensate line Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will inspect on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: Variable-Speed Blower: Provides consistent, efficient airflow for better comfort and energy savings. Electricity-Conscious Design: Optimizes system performance and reduces utility costs. Durable Construction: Built for long-lasting use and less maintenance. Compact Size: Fits tight installation spaces for flexibility. Quiet Operation: Minimizes noise for a peaceful indoor environment. When paired with a compatible RunTru heat pump or air conditioner, the A5AHV air handler creates a complete HVAC system that delivers dependable comfort and energy efficiency. Air Handler Model A5AHV003A1B30A Heat Kit Model BAYHTR1505BRK Capacity (BTU) 18K-30K Stages Variable Cabinet Size B Refrigerant R-454B Heat Source Electric Warranty 10 Year Parts, 10 Year Air Handler (When Registered with OEM) RESOURCES Air Handler LIMITED WARRANTY PRODUCT SPECS

Read more less