The Goodman HVAC system offered by Manor Heat and Air combines an energy-efficient condenser, a reliable heating component, and a high-performance evaporator coil to provide consistent heating and cooling for small to medium-sized homes in Manor, TX. Engineered for durability and comfort, it ensures year-round indoor climate control. What's Included: Goodman GLXS4BA3010 Condenser: Goodman GLXS4B single-stage air conditioner rated up to 15.2 SEER2, with an energy-efficient compressor, copper tube/enhanced aluminum-fin coil, and factory-installed filter drier. Goodman GR9S800603BN Furnace: Goodman GR9S80 single-stage, multi-speed ECM, multi-position gas furnace at 80% AFUE, with a heavy-duty aluminized-steel dual-diameter tubular heat exchanger, hot-surface igniter, and self-diagnostic control board. Goodman CAPTA3626B3 Evaporator Coil: Goodman CHPTA/CAPTA cased upflow/downflow/horizontal evaporator coil with internal TXV, all-aluminum construction, and an insulated, compact cabinet for space-limited installations. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, your technician will note it on your estimate before work begins. SPECIFICATIONS Bundle Size/Tonnage 2.5 Ton Bundle Cooling Efficiency (SEER2) 15.2 SEER2 Condenser Model GLXS4BA3010 Condenser Stages Single Furnace Model GR9S800603BN Furnace Stage/Blower Single Furnace Efficiency 80% Furnace Capacity (BTU) 80K Furnace Cabinet Size B Heat Source Gas Coil Model CAPTA3626B3 Coil Cabinet Size B AHRI 215214803 Refrigerant R-32 Warranty 10-Year Parts (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY SPEC SHEET SPEC SHEET SPEC SHEET

Read more less

The Goodman HVAC system offered by Manor Heat and Air combines an energy-efficient condenser, a reliable heating component, and a high-performance evaporator coil to provide consistent heating and cooling for small to medium-sized homes in Manor, TX. Engineered for durability and comfort, it ensures year-round indoor climate control. What's Included: Goodman GLXT7CA3610 Condenser: Goodman GLXT7C two-stage, high-efficiency air conditioner featuring a Copeland Ultra-Tech scroll compressor, ComfortBridge technology, and a quiet ECM fan motor. Goodman GMVC800603BN Furnace: Goodman GMVC80 two-stage, communicating gas furnace rated up to 80% AFUE with ComfortBridge technology and a constant-torque ECM blower. Goodman CHPTA3630B3 Evaporator Coil: Goodman CHPTA/CAPTA cased upflow/downflow/horizontal evaporator coil with internal TXV, all-aluminum construction, and an insulated, compact cabinet for space-limited installations. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, your technician will note it on your estimate before work begins. SPECIFICATIONS Bundle Size/Tonnage 3 Ton Bundle Cooling Efficiency (SEER2) 17 SEER2 Condenser Model GLXT7CA3610 Condenser Stages Single Furnace Model GMVC800603BN Furnace Stage/Blower Two Furnace Efficiency 80% Furnace Capacity (BTU) 80K Furnace Cabinet Size B Heat Source Gas Coil Model CHPTA3630B3 Coil Cabinet Size B AHRI 215865789 Refrigerant R-32 Warranty 10-Year Parts (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY SPEC SHEET SPEC SHEET SPEC SHEET

Read more less

The Goodman HVAC system offered by Manor Heat and Air combines an energy-efficient condenser, a reliable heating component, and a high-performance evaporator coil to provide consistent heating and cooling for small to medium-sized homes in Manor, TX. Engineered for durability and comfort, it ensures year-round indoor climate control. What's Included: Goodman GLXT7CA4810 Condenser: Goodman GLXT7C two-stage, high-efficiency air conditioner featuring a Copeland Ultra-Tech scroll compressor, ComfortBridge technology, and a quiet ECM fan motor. Goodman GRVT960804CNA Furnace: Goodman GRVT96 two-stage gas furnace rated up to 97.5% AFUE with ComfortBridge technology, a variable-speed ECM blower, and a two-stage gas valve for consistent, energy-efficient heating. Goodman CAPTA6030C3 Evaporator Coil: Goodman CHPTA/CAPTA cased upflow/downflow/horizontal evaporator coil with internal TXV, all-aluminum construction, and an insulated, compact cabinet for space-limited installations. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, your technician will note it on your estimate before work begins. SPECIFICATIONS Bundle Size/Tonnage 4 Ton Bundle Cooling Efficiency (SEER2) 17.2 SEER2 Condenser Model GLXT7CA4810 Condenser Stages Two-Stage Furnace Model GRVT960804CNA Furnace Stage/Blower Two-Stage/Variable Furnace Efficiency 96% Furnace Capacity (BTU) 80K Furnace Cabinet Size C Heat Source Gas Coil Model CAPTA6030C3 Coil Cabinet Size C AHRI 216614952 Refrigerant R-32 Warranty 10-Year Parts (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY SPEC SHEET SPEC SHEET SPEC SHEET

Read more less

The Goodman HVAC system offered by Manor Heat and Air combines an energy-efficient condenser, a reliable heating component, and a high-performance evaporator coil to provide consistent heating and cooling for small to medium-sized homes in Manor, TX. Engineered for durability and comfort, it ensures year-round indoor climate control. What's Included: Goodman GLXS4BA1810 Condenser: Goodman GLXS4B single-stage air conditioner rated up to 15.2 SEER2, with an energy-efficient compressor, copper tube/enhanced aluminum-fin coil, and factory-installed filter drier. Goodman GR9S800403AN Furnace: Goodman GR9S80 single-stage, multi-speed ECM, multi-position gas furnace at 80% AFUE, with a heavy-duty aluminized-steel dual-diameter tubular heat exchanger, hot-surface igniter, and self-diagnostic control board. Goodman CAPTA1818A3 Evaporator Coil: Goodman CHPTA/CAPTA cased upflow/downflow/horizontal evaporator coil with internal TXV, all-aluminum construction, and an insulated, compact cabinet for space-limited installations. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, your technician will note it on your estimate before work begins. SPECIFICATIONS Bundle Size/Tonnage 1.5 Ton Bundle Cooling Efficiency (SEER2) 14.5 SEER2 Condenser Model GLXS4BA1810 Condenser Stages Single Furnace Model GR9S800403AN Furnace Stage/Blower Single Furnace Efficiency 80% Furnace Capacity (BTU) 60K Furnace Cabinet Size A Heat Source Gas Coil Model CAPTA1818A3 Coil Cabinet Size A AHRI 215214549 Refrigerant R-32 Warranty 10-Year Parts (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY SPEC SHEET SPEC SHEET SPEC SHEET

Read more less

The Goodman HVAC system offered by Manor Heat and Air combines an energy-efficient condenser, a reliable heating component, and a high-performance evaporator coil to provide consistent heating and cooling for small to medium-sized homes in Manor, TX. Engineered for durability and comfort, it ensures year-round indoor climate control. What's Included: Goodman GLXS4BA3010 Condenser: Goodman GLXS4B single-stage air conditioner rated up to 15.2 SEER2, with an energy-efficient compressor, copper tube/enhanced aluminum-fin coil, and factory-installed filter drier. Goodman GR9S800603AN Furnace: Goodman GR9S80 single-stage, multi-speed ECM, multi-position gas furnace at 80% AFUE, with a heavy-duty aluminized-steel dual-diameter tubular heat exchanger, hot-surface igniter, and self-diagnostic control board. Goodman CHPTA3026B3 Evaporator Coil: Goodman CHPTA/CAPTA cased upflow/downflow/horizontal evaporator coil with internal TXV, all-aluminum construction, and an insulated, compact cabinet for space-limited installations. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, your technician will note it on your estimate before work begins. SPECIFICATIONS Bundle Size/Tonnage 2.5 Ton Bundle Cooling Efficiency (SEER2) 14.3 SEER2 Condenser Model GLXS4BA3010 Condenser Stages Single Furnace Model GR9S800603AN Furnace Stage/Blower Single Furnace Efficiency 80% Furnace Capacity (BTU) 60K Furnace Cabinet Size B Heat Source Gas Coil Model CHPTA3026B3 Coil Cabinet Size B AHRI 215214842 Refrigerant R-32 Warranty 10-Year Parts (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY SPEC SHEET SPEC SHEET SPEC SHEET

Read more less

The Goodman HVAC system offered by Manor Heat and Air combines an energy-efficient condenser, a reliable heating component, and a high-performance evaporator coil to provide consistent heating and cooling for small to medium-sized homes in Manor, TX. Engineered for durability and comfort, it ensures year-round indoor climate control. What's Included: Goodman GXV6SS4210A Condenser: Goodman GXV6S two-stage, high-efficiency air conditioner with an energy-efficient compressor and enhanced aluminum-fin coil for reliable, quiet cooling performance. Goodman GRVT960804CNA Furnace: Goodman GRVT96 two-stage gas furnace rated up to 97.5% AFUE with ComfortBridge technology, a variable-speed ECM blower, and a two-stage gas valve for consistent, energy-efficient heating. Goodman CAPEA4830C3 Evaporator Coil: Goodman CHPTA/CAPTA cased upflow/downflow/horizontal evaporator coil with internal TXV, all-aluminum construction, and an insulated, compact cabinet for space-limited installations. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, your technician will note it on your estimate before work begins. SPECIFICATIONS Bundle Size/Tonnage 3.5 Ton Bundle Cooling Efficiency (SEER2) 17 SEER2 Condenser Model GXV6SS4210A Condenser Stages Variable Speed Furnace Model GRVT960804CNA Furnace Stage/Blower Two-Stage/Variable Furnace Efficiency 96% Furnace Capacity (BTU) 80K Furnace Cabinet Size C Heat Source Gas Coil Model CAPEA4830C3 Coil Cabinet Size C AHRI 215490438 Refrigerant R-32 Warranty 10-Year Parts (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY SPEC SHEET SPEC SHEET SPEC SHEET

Read more less

The Goodman HVAC system offered by Manor Heat and Air combines an energy-efficient condenser, a reliable heating component, and a high-performance evaporator coil to provide consistent heating and cooling for small to medium-sized homes in Manor, TX. Engineered for durability and comfort, it ensures year-round indoor climate control. What's Included: Goodman GXV6SS4210A Condenser: Goodman GXV6S two-stage, high-efficiency air conditioner with an energy-efficient compressor and enhanced aluminum-fin coil for reliable, quiet cooling performance. Goodman GRVT800804CNA Furnace: Goodman GRVT80 two-stage gas furnace rated up to 80% AFUE with a variable-speed ECM blower and a two-stage gas valve for consistent, energy-efficient heating. Goodman CAPEA4830C3 Evaporator Coil: Goodman CHPTA/CAPTA cased upflow/downflow/horizontal evaporator coil with internal TXV, all-aluminum construction, and an insulated, compact cabinet for space-limited installations. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, your technician will note it on your estimate before work begins. SPECIFICATIONS Bundle Size/Tonnage 3.5 Ton Bundle Cooling Efficiency (SEER2) 17 SEER2 Condenser Model GXV6SS4210A Condenser Stages Variable Speed Furnace Model GRVT800804CNA Furnace Stage/Blower Two-Stage/Variable Furnace Efficiency 80% Furnace Capacity (BTU) 80K Furnace Cabinet Size C Heat Source Gas Coil Model CAPEA4830C3 Coil Cabinet Size C AHRI 215490442 Refrigerant R-32 Warranty 10-Year Parts (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY SPEC SHEET SPEC SHEET SPEC SHEET

Read more less

The Goodman HVAC system offered by Manor Heat and Air combines an energy-efficient condenser, a reliable heating component, and a high-performance evaporator coil to provide consistent heating and cooling for small to medium-sized homes in Manor, TX. Engineered for durability and comfort, it ensures year-round indoor climate control. What's Included: Goodman GLXT7CA4810 Condenser: Goodman GLXT7C two-stage, high-efficiency air conditioner featuring a Copeland Ultra-Tech scroll compressor, ComfortBridge technology, and a quiet ECM fan motor. Goodman GMVC800804CNA Furnace: Goodman GMVC80 two-stage, communicating gas furnace rated up to 80% AFUE with ComfortBridge technology and a constant-torque ECM blower. Goodman CAPTA6030C3 Evaporator Coil: Goodman CHPTA/CAPTA cased upflow/downflow/horizontal evaporator coil with internal TXV, all-aluminum construction, and an insulated, compact cabinet for space-limited installations. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, your technician will note it on your estimate before work begins. SPECIFICATIONS Bundle Size/Tonnage 4 Ton Bundle Cooling Efficiency (SEER2) 17.5 SEER2 Condenser Model GLXT7CA4810 Condenser Stages Two-Stage Furnace Model GMVC800804CNA Furnace Stage/Blower Two-Stage/Comm Furnace Efficiency 80% Furnace Capacity (BTU) 80K Furnace Cabinet Size C Heat Source Gas Coil Model CAPTA6030C3 Coil Cabinet Size C AHRI 215865291 Refrigerant R-32 Warranty 10-Year Parts (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY SPEC SHEET SPEC SHEET SPEC SHEET

Read more less

The Goodman HVAC system offered by Manor Heat and Air combines an energy-efficient condenser, a reliable heating component, and a high-performance evaporator coil to provide consistent heating and cooling for small to medium-sized homes in Manor, TX. Engineered for durability and comfort, it ensures year-round indoor climate control. What's Included: Goodman GLXT7CA4810 Condenser: Goodman GLXT7C two-stage, high-efficiency air conditioner featuring a Copeland Ultra-Tech scroll compressor, ComfortBridge technology, and a quiet ECM fan motor. Goodman GMVC800804CNA Furnace: Goodman GMVC80 two-stage, communicating gas furnace rated up to 80% AFUE with ComfortBridge technology and a constant-torque ECM blower. Goodman CHPTA4830C3 Evaporator Coil: Goodman CHPTA/CAPTA cased upflow/downflow/horizontal evaporator coil with internal TXV, all-aluminum construction, and an insulated, compact cabinet for space-limited installations. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, your technician will note it on your estimate before work begins. SPECIFICATIONS Bundle Size/Tonnage 4 Ton Bundle Cooling Efficiency (SEER2) 17.2 SEER2 Condenser Model GLXT7CA4810 Condenser Stages Two-Stage Furnace Model GMVC800804CNA Furnace Stage/Blower Two-Stage/Comm Furnace Efficiency 80% Furnace Capacity (BTU) 80K Furnace Cabinet Size C Heat Source Gas Coil Model CHPTA4830C3 Coil Cabinet Size C AHRI 215865305 Refrigerant R-32 Warranty 10-Year Parts (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY SPEC SHEET SPEC SHEET SPEC SHEET

Read more less

The Goodman HVAC system offered by Manor Heat and Air combines an energy-efficient condenser, a reliable heating component, and a high-performance evaporator coil to provide consistent heating and cooling for small to medium-sized homes in Manor, TX. Engineered for durability and comfort, it ensures year-round indoor climate control. What's Included: Goodman GLXT7CA3610 Condenser: Goodman GLXT7C two-stage, high-efficiency air conditioner featuring a Copeland Ultra-Tech scroll compressor, ComfortBridge technology, and a quiet ECM fan motor. Goodman GMVC800603BNA Furnace: Goodman GMVC80 two-stage, communicating gas furnace rated up to 80% AFUE with ComfortBridge technology and a constant-torque ECM blower. Goodman CAPTA3626B3 Evaporator Coil: Goodman CHPTA/CAPTA cased upflow/downflow/horizontal evaporator coil with internal TXV, all-aluminum construction, and an insulated, compact cabinet for space-limited installations. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, your technician will note it on your estimate before work begins. SPECIFICATIONS Bundle Size/Tonnage 3 Ton Bundle Cooling Efficiency (SEER2) 17 SEER2 Condenser Model GLXT7CA3610 Condenser Stages Two-Stage Furnace Model GMVC800603BNA Furnace Stage/Blower Two-Stage/Comm Furnace Efficiency 80% Furnace Capacity (BTU) 60K Furnace Cabinet Size B Heat Source Gas Coil Model CAPTA3626B3 Coil Cabinet Size B AHRI 215865745 Refrigerant R-32 Warranty 10-Year Parts (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY SPEC SHEET SPEC SHEET SPEC SHEET

Read more less

The Goodman HVAC system offered by Manor Heat and Air combines an energy-efficient condenser, a reliable heating component, and a high-performance evaporator coil to provide consistent heating and cooling for small to medium-sized homes in Manor, TX. Engineered for durability and comfort, it ensures year-round indoor climate control. What's Included: Goodman GLXT7CA3610 Condenser: Goodman GLXT7C two-stage, high-efficiency air conditioner featuring a Copeland Ultra-Tech scroll compressor, ComfortBridge technology, and a quiet ECM fan motor. Goodman GRVT960804CNA Furnace: Goodman GRVT96 two-stage gas furnace rated up to 97.5% AFUE with ComfortBridge technology, a variable-speed ECM blower, and a two-stage gas valve for consistent, energy-efficient heating. Goodman CHPTA3630C3 Evaporator Coil: Goodman CHPTA/CAPTA cased upflow/downflow/horizontal evaporator coil with internal TXV, all-aluminum construction, and an insulated, compact cabinet for space-limited installations. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, your technician will note it on your estimate before work begins. SPECIFICATIONS Bundle Size/Tonnage 3 Ton Bundle Cooling Efficiency (SEER2) 17 SEER2 Condenser Model GLXT7CA3610 Condenser Stages Two-Stage Furnace Model GRVT960804CNA Furnace Stage/Blower Two-Stage/Variable Furnace Efficiency 96% Furnace Capacity (BTU) 80K Furnace Cabinet Size C Heat Source Gas Coil Model CHPTA3630C3 Coil Cabinet Size C AHRI 216615014 Refrigerant R-32 Warranty 10-Year Parts (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY SPEC SHEET SPEC SHEET SPEC SHEET

Read more less

The Goodman HVAC system offered by Manor Heat and Air combines an energy-efficient condenser, a reliable heating component, and a high-performance evaporator coil to provide consistent heating and cooling for small to medium-sized homes in Manor, TX. Engineered for durability and comfort, it ensures year-round indoor climate control. What's Included: Goodman GLXT7CA4810 Condenser: Goodman GLXT7C two-stage, high-efficiency air conditioner featuring a Copeland Ultra-Tech scroll compressor, ComfortBridge technology, and a quiet ECM fan motor. Goodman GMVC960804CNB Furnace: Goodman GMVC96 two-stage, communicating gas furnace rated up to 96% AFUE with ComfortBridge technology and a constant-torque ECM blower. Goodman CAPTA6030C3 Evaporator Coil: Goodman CHPTA/CAPTA cased upflow/downflow/horizontal evaporator coil with internal TXV, all-aluminum construction, and an insulated, compact cabinet for space-limited installations. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, your technician will note it on your estimate before work begins. SPECIFICATIONS Bundle Size/Tonnage 4 Ton Bundle Cooling Efficiency (SEER2) 17.2 SEER2 Condenser Model GLXT7CA4810 Condenser Stages Two-Stage Furnace Model GMVC960804CNB Furnace Stage/Blower Two-Stage/Comm Furnace Efficiency 96% Furnace Capacity (BTU) 80K Furnace Cabinet Size C Heat Source Gas Coil Model CAPTA6030C3 Coil Cabinet Size C AHRI 215865295 Refrigerant R-32 Warranty 10-Year Parts (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY SPEC SHEET SPEC SHEET SPEC SHEET

Read more less

The Goodman HVAC system offered by Manor Heat and Air combines an energy-efficient condenser, a reliable heating component, and a high-performance evaporator coil to provide consistent heating and cooling for small to medium-sized homes in Manor, TX. Engineered for durability and comfort, it ensures year-round indoor climate control. What's Included: Goodman GXV6SS4210A Condenser: Goodman GXV6S two-stage, high-efficiency air conditioner with an energy-efficient compressor and enhanced aluminum-fin coil for reliable, quiet cooling performance. Goodman GRVT800804CNA Furnace: Goodman GRVT80 two-stage gas furnace rated up to 80% AFUE with a variable-speed ECM blower and a two-stage gas valve for consistent, energy-efficient heating. Goodman CHPEA4830C3 Evaporator Coil: Goodman CHPTA/CAPTA cased upflow/downflow/horizontal evaporator coil with internal TXV, all-aluminum construction, and an insulated, compact cabinet for space-limited installations. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, your technician will note it on your estimate before work begins. SPECIFICATIONS Bundle Size/Tonnage 3.5 Ton Bundle Cooling Efficiency (SEER2) 17 SEER2 Condenser Model GXV6SS4210A Condenser Stages Variable Speed Furnace Model GRVT800804CNA Furnace Stage/Blower Two-Stage/Variable Furnace Efficiency 80% Furnace Capacity (BTU) 80K Furnace Cabinet Size C Heat Source Gas Coil Model CHPEA4830C3 Coil Cabinet Size C AHRI 215490461 Refrigerant R-32 Warranty 10-Year Parts (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY SPEC SHEET SPEC SHEET SPEC SHEET

Read more less

The Goodman HVAC system offered by Manor Heat and Air combines an energy-efficient condenser, a reliable heating component, and a high-performance evaporator coil to provide consistent heating and cooling for small to medium-sized homes in Manor, TX. Engineered for durability and comfort, it ensures year-round indoor climate control. What's Included: Goodman GLXT7CA3610 Condenser: Goodman GLXT7C two-stage, high-efficiency air conditioner featuring a Copeland Ultra-Tech scroll compressor, ComfortBridge technology, and a quiet ECM fan motor. Goodman GRVT960804CNA Furnace: Goodman GRVT96 two-stage gas furnace rated up to 97.5% AFUE with ComfortBridge technology, a variable-speed ECM blower, and a two-stage gas valve for consistent, energy-efficient heating. Goodman CAPTA3626C3 Evaporator Coil: Goodman CHPTA/CAPTA cased upflow/downflow/horizontal evaporator coil with internal TXV, all-aluminum construction, and an insulated, compact cabinet for space-limited installations. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, your technician will note it on your estimate before work begins. SPECIFICATIONS Bundle Size/Tonnage 3 Ton Bundle Cooling Efficiency (SEER2) 17.2 SEER2 Condenser Model GLXT7CA3610 Condenser Stages Two-Stage Furnace Model GRVT960804CNA Furnace Stage/Blower Two-Stage/Variable Furnace Efficiency 96% Furnace Capacity (BTU) 80K Furnace Cabinet Size C Heat Source Gas Coil Model CAPTA3626C3 Coil Cabinet Size C AHRI 216615008 Refrigerant R-32 Warranty 10-Year Parts (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY SPEC SHEET SPEC SHEET SPEC SHEET

Read more less

The Goodman HVAC system offered by Manor Heat and Air combines an energy-efficient condenser, a reliable heating component, and a high-performance evaporator coil to provide consistent heating and cooling for small to medium-sized homes in Manor, TX. Engineered for durability and comfort, it ensures year-round indoor climate control. What's Included: Goodman GLXT7CA3610 Condenser: Goodman GLXT7C two-stage, high-efficiency air conditioner featuring a Copeland Ultra-Tech scroll compressor, ComfortBridge technology, and a quiet ECM fan motor. Goodman GRVT800604BNA Furnace: Goodman GRVT80 two-stage gas furnace rated up to 80% AFUE with a variable-speed ECM blower and a two-stage gas valve for consistent, energy-efficient heating. Goodman CHPTA3630B3 Evaporator Coil: Goodman CHPTA/CAPTA cased upflow/downflow/horizontal evaporator coil with internal TXV, all-aluminum construction, and an insulated, compact cabinet for space-limited installations. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, your technician will note it on your estimate before work begins. SPECIFICATIONS Bundle Size/Tonnage 3 Ton Bundle Cooling Efficiency (SEER2) 17 SEER2 Condenser Model GLXT7CA3610 Condenser Stages Two-Stage Furnace Model GRVT800604BNA Furnace Stage/Blower Two-Stage/Variable Furnace Efficiency 80% Furnace Capacity (BTU) 60K Furnace Cabinet Size B Heat Source Gas Coil Model CHPTA3630B3 Coil Cabinet Size B AHRI 216616072 Refrigerant R-32 Warranty 10-Year Parts (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY SPEC SHEET SPEC SHEET SPEC SHEET

Read more less

The Goodman HVAC system offered by Manor Heat and Air combines an energy-efficient condenser, a reliable heating component, and a high-performance evaporator coil to provide consistent heating and cooling for small to medium-sized homes in Manor, TX. Engineered for durability and comfort, it ensures year-round indoor climate control. What's Included: Goodman GXV9SA3610A Condenser: Goodman GXV9S modulating, inverter-driven air conditioner delivering precise variable-capacity cooling and enhanced comfort with quiet, efficient operation. Goodman GRVM970804CNA Furnace: Goodman GRVM97 modulating gas furnace rated up to 97% AFUE with a variable-speed ECM blower for precise, energy-efficient heating. Goodman CAPEA4830C3 Evaporator Coil: Goodman CHPTA/CAPTA cased upflow/downflow/horizontal evaporator coil with internal TXV, all-aluminum construction, and an insulated, compact cabinet for space-limited installations. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, your technician will note it on your estimate before work begins. SPECIFICATIONS Bundle Size/Tonnage 3 Ton Bundle Cooling Efficiency (SEER2) 18.5 SEER2 Condenser Model GXV9SA3610A Condenser Stages Variable Speed Furnace Model GRVM970804CNA Furnace Stage/Blower Modulating/Variable Furnace Efficiency 97% Furnace Capacity (BTU) 80K Furnace Cabinet Size C Heat Source Gas Coil Model CAPEA4830C3 Coil Cabinet Size C AHRI 217282156 Refrigerant R-32 Warranty 10-Year Parts (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY SPEC SHEET SPEC SHEET SPEC SHEET

Read more less

The Goodman HVAC system offered by Manor Heat and Air combines an energy-efficient condenser, a reliable heating component, and a high-performance evaporator coil to provide consistent heating and cooling for small to medium-sized homes in Manor, TX. Engineered for durability and comfort, it ensures year-round indoor climate control. What's Included: Goodman GXV9SA3610A Condenser: Goodman GXV9S modulating, inverter-driven air conditioner delivering precise variable-capacity cooling and enhanced comfort with quiet, efficient operation. Goodman GRVT800804CNA Furnace: Goodman GRVT80 two-stage gas furnace rated up to 80% AFUE with a variable-speed ECM blower and a two-stage gas valve for consistent, energy-efficient heating. Goodman CAPEA4830C3 Evaporator Coil: Goodman CHPTA/CAPTA cased upflow/downflow/horizontal evaporator coil with internal TXV, all-aluminum construction, and an insulated, compact cabinet for space-limited installations. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, your technician will note it on your estimate before work begins. SPECIFICATIONS Bundle Size/Tonnage 3 Ton Bundle Cooling Efficiency (SEER2) 18.5 SEER2 Condenser Model GXV9SA3610A Condenser Stages Variable Speed Furnace Model GRVT800804CNA Furnace Stage/Blower Two-Stage/Variable Furnace Efficiency 80% Furnace Capacity (BTU) 80K Furnace Cabinet Size C Heat Source Gas Coil Model CAPEA4830C3 Coil Cabinet Size C AHRI 217282151 Refrigerant R-32 Warranty 10-Year Parts (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY SPEC SHEET SPEC SHEET SPEC SHEET

Read more less

The Goodman HVAC system offered by Manor Heat and Air combines an energy-efficient condenser, a reliable heating component, and a high-performance evaporator coil to provide consistent heating and cooling for small to medium-sized homes in Manor, TX. Engineered for durability and comfort, it ensures year-round indoor climate control. What's Included: Goodman GLXT7CA3610 Condenser: Goodman GLXT7C two-stage, high-efficiency air conditioner featuring a Copeland Ultra-Tech scroll compressor, ComfortBridge technology, and a quiet ECM fan motor. Goodman GMVC960804CNB Furnace: Goodman GMVC96 two-stage, communicating gas furnace rated up to 96% AFUE with ComfortBridge technology and a constant-torque ECM blower. Goodman CAPTA3626C3 Evaporator Coil: Goodman CHPTA/CAPTA cased upflow/downflow/horizontal evaporator coil with internal TXV, all-aluminum construction, and an insulated, compact cabinet for space-limited installations. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, your technician will note it on your estimate before work begins. SPECIFICATIONS Bundle Size/Tonnage 3 Ton Bundle Cooling Efficiency (SEER2) 17.2 SEER2 Condenser Model GLXT7CA3610 Condenser Stages Two-Stage Furnace Model GMVC960804CNB Furnace Stage/Blower Two-Stage/Comm Furnace Efficiency 96% Furnace Capacity (BTU) 80K Furnace Cabinet Size C Heat Source Gas Coil Model CAPTA3626C3 Coil Cabinet Size C AHRI 215865754 Refrigerant R-32 Warranty 10-Year Parts (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY SPEC SHEET SPEC SHEET SPEC SHEET

Read more less

The Goodman HVAC system offered by Manor Heat and Air combines an energy-efficient condenser, a reliable heating component, and a high-performance evaporator coil to provide consistent heating and cooling for small to medium-sized homes in Manor, TX. Engineered for durability and comfort, it ensures year-round indoor climate control. What's Included: Goodman GLXT7CA3610 Condenser: Goodman GLXT7C two-stage, high-efficiency air conditioner featuring a Copeland Ultra-Tech scroll compressor, ComfortBridge technology, and a quiet ECM fan motor. Goodman GMVC960804CNB Furnace: Goodman GMVC96 two-stage, communicating gas furnace rated up to 96% AFUE with ComfortBridge technology and a constant-torque ECM blower. Goodman CHPTA3630C3 Evaporator Coil: Goodman CHPTA/CAPTA cased upflow/downflow/horizontal evaporator coil with internal TXV, all-aluminum construction, and an insulated, compact cabinet for space-limited installations. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, your technician will note it on your estimate before work begins. SPECIFICATIONS Bundle Size/Tonnage 3 Ton Bundle Cooling Efficiency (SEER2) 17 SEER2 Condenser Model GLXT7CA3610 Condenser Stages Two-Stage Furnace Model GMVC960804CNB Furnace Stage/Blower Two-Stage/Comm Furnace Efficiency 96% Furnace Capacity (BTU) 80K Furnace Cabinet Size C Heat Source Gas Coil Model CHPTA3630C3 Coil Cabinet Size C AHRI 215865798 Refrigerant R-32 Warranty 10-Year Parts (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY SPEC SHEET SPEC SHEET SPEC SHEET

Read more less

The Goodman HVAC system offered by Manor Heat and Air combines an energy-efficient condenser, a reliable heating component, and a high-performance evaporator coil to provide consistent heating and cooling for small to medium-sized homes in Manor, TX. Engineered for durability and comfort, it ensures year-round indoor climate control. What's Included: Goodman GXV9SA3610A Condenser: Goodman GXV9S modulating, inverter-driven air conditioner delivering precise variable-capacity cooling and enhanced comfort with quiet, efficient operation. Goodman GRVT800804CNA Furnace: Goodman GRVT80 two-stage gas furnace rated up to 80% AFUE with a variable-speed ECM blower and a two-stage gas valve for consistent, energy-efficient heating. Goodman CHPEA4830C3 Evaporator Coil: Goodman CHPTA/CAPTA cased upflow/downflow/horizontal evaporator coil with internal TXV, all-aluminum construction, and an insulated, compact cabinet for space-limited installations. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, your technician will note it on your estimate before work begins. SPECIFICATIONS Bundle Size/Tonnage 3 Ton Bundle Cooling Efficiency (SEER2) 18.5 SEER2 Condenser Model GXV9SA3610A Condenser Stages Variable Speed Furnace Model GRVT800804CNA Furnace Stage/Blower Two-Stage/Variable Furnace Efficiency 80% Furnace Capacity (BTU) 80K Furnace Cabinet Size C Heat Source Gas Coil Model CHPEA4830C3 Coil Cabinet Size C AHRI 217282174 Refrigerant R-32 Warranty 10-Year Parts (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY SPEC SHEET SPEC SHEET SPEC SHEET

Read more less

The Goodman HVAC system offered by Manor Heat and Air combines an energy-efficient condenser, a reliable heating component, and a high-performance evaporator coil to provide consistent heating and cooling for small to medium-sized homes in Manor, TX. Engineered for durability and comfort, it ensures year-round indoor climate control. What's Included: Goodman GXV6SS3010A Condenser: Goodman GXV6S two-stage, high-efficiency air conditioner with an energy-efficient compressor and enhanced aluminum-fin coil for reliable, quiet cooling performance. Goodman GRVT960403BNA Furnace: Goodman GRVT96 two-stage gas furnace rated up to 97.5% AFUE with ComfortBridge technology, a variable-speed ECM blower, and a two-stage gas valve for consistent, energy-efficient heating. Goodman CAPEA3022B3 Evaporator Coil: Goodman CHPTA/CAPTA cased upflow/downflow/horizontal evaporator coil with internal TXV, all-aluminum construction, and an insulated, compact cabinet for space-limited installations. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, your technician will note it on your estimate before work begins. SPECIFICATIONS Bundle Size/Tonnage 2.5 Ton Bundle Cooling Efficiency (SEER2) 17.5 SEER2 Condenser Model GXV6SS3010A Condenser Stages Variable Speed Furnace Model GRVT960403BNA Furnace Stage/Blower Two-Stage/Variable Furnace Efficiency 96% Furnace Capacity (BTU) 40K Furnace Cabinet Size B Heat Source Gas Coil Model CAPEA3022B3 Coil Cabinet Size B AHRI 215490341 Refrigerant R-32 Warranty 10-Year Parts (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY SPEC SHEET SPEC SHEET SPEC SHEET

Read more less

The Goodman HVAC system offered by Manor Heat and Air combines an energy-efficient condenser, a reliable heating component, and a high-performance evaporator coil to provide consistent heating and cooling for small to medium-sized homes in Manor, TX. Engineered for durability and comfort, it ensures year-round indoor climate control. What's Included: Goodman GXV6SS3010A Condenser: Goodman GXV6S two-stage, high-efficiency air conditioner with an energy-efficient compressor and enhanced aluminum-fin coil for reliable, quiet cooling performance. Goodman GRVT960403BNA Furnace: Goodman GRVT96 two-stage gas furnace rated up to 97.5% AFUE with ComfortBridge technology, a variable-speed ECM blower, and a two-stage gas valve for consistent, energy-efficient heating. Goodman CHPEA3026B3 Evaporator Coil: Goodman CHPTA/CAPTA cased upflow/downflow/horizontal evaporator coil with internal TXV, all-aluminum construction, and an insulated, compact cabinet for space-limited installations. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, your technician will note it on your estimate before work begins. SPECIFICATIONS Bundle Size/Tonnage 2.5 Ton Bundle Cooling Efficiency (SEER2) 17.5 SEER2 Condenser Model GXV6SS3010A Condenser Stages Variable Speed Furnace Model GRVT960403BNA Furnace Stage/Blower Two-Stage/Variable Furnace Efficiency 96% Furnace Capacity (BTU) 40K Furnace Cabinet Size B Heat Source Gas Coil Model CHPEA3026B3 Coil Cabinet Size B AHRI 215490375 Refrigerant R-32 Warranty 10-Year Parts (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY SPEC SHEET SPEC SHEET SPEC SHEET

Read more less

The Goodman HVAC system offered by Manor Heat and Air combines an energy-efficient condenser, a reliable heating component, and a high-performance evaporator coil to provide consistent heating and cooling for small to medium-sized homes in Manor, TX. Engineered for durability and comfort, it ensures year-round indoor climate control. What's Included: Goodman GXV9SA3610A Condenser: Goodman GXV9S modulating, inverter-driven air conditioner delivering precise variable-capacity cooling and enhanced comfort with quiet, efficient operation. Goodman GRVT960804CNA Furnace: Goodman GRVT96 two-stage gas furnace rated up to 97.5% AFUE with ComfortBridge technology, a variable-speed ECM blower, and a two-stage gas valve for consistent, energy-efficient heating. Goodman CAPEA4830C3 Evaporator Coil: Goodman CHPTA/CAPTA cased upflow/downflow/horizontal evaporator coil with internal TXV, all-aluminum construction, and an insulated, compact cabinet for space-limited installations. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, your technician will note it on your estimate before work begins. SPECIFICATIONS Bundle Size/Tonnage 3 Ton Bundle Cooling Efficiency (SEER2) 18.5 SEER2 Condenser Model GXV9SA3610A Condenser Stages Variable Speed Furnace Model GRVT960804CNA Furnace Stage/Blower Two-Stage/Variable Furnace Efficiency 96% Furnace Capacity (BTU) 80K Furnace Cabinet Size C Heat Source Gas Coil Model CAPEA4830C3 Coil Cabinet Size C AHRI 217282147 Refrigerant R-32 Warranty 10-Year Parts (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY SPEC SHEET SPEC SHEET SPEC SHEET

Read more less

The Goodman HVAC system offered by Manor Heat and Air combines an energy-efficient condenser, a reliable heating component, and a high-performance evaporator coil to provide consistent heating and cooling for small to medium-sized homes in Manor, TX. Engineered for durability and comfort, it ensures year-round indoor climate control. What's Included: Goodman GXV9SA3610A Condenser: Goodman GXV9S modulating, inverter-driven air conditioner delivering precise variable-capacity cooling and enhanced comfort with quiet, efficient operation. Goodman GRVM970804CNA Furnace: Goodman GRVM97 modulating gas furnace rated up to 97% AFUE with a variable-speed ECM blower for precise, energy-efficient heating. Goodman CHPEA4830C3 Evaporator Coil: Goodman CHPTA/CAPTA cased upflow/downflow/horizontal evaporator coil with internal TXV, all-aluminum construction, and an insulated, compact cabinet for space-limited installations. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, your technician will note it on your estimate before work begins. SPECIFICATIONS Bundle Size/Tonnage 3 Ton Bundle Cooling Efficiency (SEER2) 18 SEER2 Condenser Model GXV9SA3610A Condenser Stages Variable Speed Furnace Model GRVM970804CNA Furnace Stage/Blower Modulating/Variable Furnace Efficiency 97% Furnace Capacity (BTU) 80K Furnace Cabinet Size C Heat Source Gas Coil Model CHPEA4830C3 Coil Cabinet Size C AHRI 217282179 Refrigerant R-32 Warranty 10-Year Parts (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY SPEC SHEET SPEC SHEET SPEC SHEET

Read more less