The Goodman HVAC system offered by Manor Heat and Air combines an energy-efficient condenser, a reliable heating component, and a high-performance evaporator coil to provide consistent heating and cooling for small to medium-sized homes in Manor, TX. Engineered for durability and comfort, it ensures year-round indoor climate control. What's Included: Goodman GLZS5BA6010 Heat Pump Condenser: Goodman GLZS5B single-stage heat pump rated up to 16 SEER2 and 8.2 HSPF2, a step above the GLZS4 tier, with an energy-efficient compressor and durable, corrosion-resistant cabinet. Goodman AMST60DU1300 Air Handler: Goodman AMST energy-efficient, multi-position, multi-speed ECM air handler with a factory-installed TXV, all-aluminum evaporator coil, optimized for pairing with single-stage AC or heat-pump condensers. Goodman HKTSD20DB Heat Kit: Goodman HKTSD electric heat kit accessory for AMST-series air handlers, factory-assembled and tested with plug-in wiring harness, sequencer staging, and a fuse-link high-temperature limit control. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Heat Pump Kit (Condenser + Air Handler & Heat Kit) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Electric heat kit factory-matched heat strip, field-installed and wired to OEM spec Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, your technician will note it on your estimate before work begins. SPECIFICATIONS Bundle Size/Tonnage 5 Ton Bundle Cooling Efficiency (SEER2) 15 SEER2 Condenser Model GLZS5BA6010 Condenser Stages Single Stage Air Handler Model AMST60DU1300 Air Handler Blower Constant Heat Kit Model HKTSD20DB Heat Source Heat Pump w/ Electric Backup AHRI 215381165 Refrigerant R-32 Warranty 10-Year Parts, 10-Year Compressor (When Registered with OEM) RESOURCES Condenser Air Handler LIMITED WARRANTY LIMITED WARRANTY SPEC SHEET SPEC SHEET

Read more less

The Goodman HVAC system offered by Manor Heat and Air combines an energy-efficient condenser, a reliable heating component, and a high-performance evaporator coil to provide consistent heating and cooling for small to medium-sized homes in Manor, TX. Engineered for durability and comfort, it ensures year-round indoor climate control. What's Included: Goodman GLZS5BA4810 Heat Pump Condenser: Goodman GLZS5B single-stage heat pump rated up to 16 SEER2 and 8.2 HSPF2, a step above the GLZS4 tier, with an energy-efficient compressor and durable, corrosion-resistant cabinet. Goodman AMST48CU1300 Air Handler: Goodman AMST energy-efficient, multi-position, multi-speed ECM air handler with a factory-installed TXV, all-aluminum evaporator coil, optimized for pairing with single-stage AC or heat-pump condensers. Goodman HKTSD15XB Heat Kit: Goodman HKTSD electric heat kit accessory for AMST-series air handlers, factory-assembled and tested with plug-in wiring harness, sequencer staging, and a fuse-link high-temperature limit control. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Heat Pump Kit (Condenser + Air Handler & Heat Kit) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Electric heat kit factory-matched heat strip, field-installed and wired to OEM spec Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, your technician will note it on your estimate before work begins. SPECIFICATIONS Bundle Size/Tonnage 4 Ton Bundle Cooling Efficiency (SEER2) 15 SEER2 Condenser Model GLZS5BA4810 Condenser Stages Single Stage Air Handler Model AMST48CU1300 Air Handler Blower Constant Heat Kit Model HKTSD15XB Heat Source Heat Pump w/ Electric Backup AHRI 215381164 Refrigerant R-32 Warranty 10-Year Parts, 10-Year Compressor (When Registered with OEM) RESOURCES Condenser Air Handler LIMITED WARRANTY LIMITED WARRANTY SPEC SHEET SPEC SHEET

Read more less

The Goodman HVAC system offered by Manor Heat and Air combines an energy-efficient condenser, a reliable heating component, and a high-performance evaporator coil to provide consistent heating and cooling for small to medium-sized homes in Manor, TX. Engineered for durability and comfort, it ensures year-round indoor climate control. What's Included: Goodman GLZS5BA4210 Heat Pump Condenser: Goodman GLZS5B single-stage heat pump rated up to 16 SEER2 and 8.2 HSPF2, a step above the GLZS4 tier, with an energy-efficient compressor and durable, corrosion-resistant cabinet. Goodman AMST42CU1300 Air Handler: Goodman AMST energy-efficient, multi-position, multi-speed ECM air handler with a factory-installed TXV, all-aluminum evaporator coil, optimized for pairing with single-stage AC or heat-pump condensers. Goodman HKTSD15XB Heat Kit: Goodman HKTSD electric heat kit accessory for AMST-series air handlers, factory-assembled and tested with plug-in wiring harness, sequencer staging, and a fuse-link high-temperature limit control. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Heat Pump Kit (Condenser + Air Handler & Heat Kit) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Electric heat kit factory-matched heat strip, field-installed and wired to OEM spec Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, your technician will note it on your estimate before work begins. SPECIFICATIONS Bundle Size/Tonnage 3.5 Ton Bundle Cooling Efficiency (SEER2) 15 SEER2 Condenser Model GLZS5BA4210 Condenser Stages Single Stage Air Handler Model AMST42CU1300 Air Handler Blower Constant Heat Kit Model HKTSD15XB Heat Source Heat Pump w/ Electric Backup AHRI 215381163 Refrigerant R-32 Warranty 10-Year Parts, 10-Year Compressor (When Registered with OEM) RESOURCES Condenser Air Handler LIMITED WARRANTY LIMITED WARRANTY SPEC SHEET SPEC SHEET

Read more less

The Goodman HVAC system offered by Manor Heat and Air combines an energy-efficient condenser, a reliable heating component, and a high-performance evaporator coil to provide consistent heating and cooling for small to medium-sized homes in Manor, TX. Engineered for durability and comfort, it ensures year-round indoor climate control. What's Included: Goodman GLZS5BA1810 Heat Pump Condenser: Goodman GLZS5B single-stage heat pump rated up to 16 SEER2 and 8.2 HSPF2, a step above the GLZS4 tier, with an energy-efficient compressor and durable, corrosion-resistant cabinet. Goodman AMST24BU1300 Air Handler: Goodman AMST energy-efficient, multi-position, multi-speed ECM air handler with a factory-installed TXV, all-aluminum evaporator coil, optimized for pairing with single-stage AC or heat-pump condensers. Goodman HKTSD08X1 Heat Kit: Goodman HKTSD electric heat kit accessory for AMST-series air handlers, factory-assembled and tested with plug-in wiring harness, sequencer staging, and a fuse-link high-temperature limit control. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Heat Pump Kit (Condenser + Air Handler & Heat Kit) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Electric heat kit factory-matched heat strip, field-installed and wired to OEM spec Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, your technician will note it on your estimate before work begins. SPECIFICATIONS Bundle Size/Tonnage 1.5 Ton Bundle Cooling Efficiency (SEER2) 15 SEER2 Condenser Model GLZS5BA1810 Condenser Stages Single Stage Air Handler Model AMST24BU1300 Air Handler Blower Constant Heat Kit Model HKTSD08X1 Heat Source Heat Pump w/ Electric Backup AHRI 215381159 Refrigerant R-32 Warranty 10-Year Parts, 10-Year Compressor (When Registered with OEM) RESOURCES Condenser Air Handler LIMITED WARRANTY LIMITED WARRANTY SPEC SHEET SPEC SHEET

Read more less

The Goodman HVAC system offered by Manor Heat and Air combines an energy-efficient condenser, a reliable heating component, and a high-performance evaporator coil to provide consistent heating and cooling for small to medium-sized homes in Manor, TX. Engineered for durability and comfort, it ensures year-round indoor climate control. What's Included: Goodman GLZT7CA4810 Heat Pump Condenser: Goodman GLZT7C two-stage heat pump delivering up to 17.5 SEER2 and 8.2 HSPF2, with a two-stage scroll compressor, R-32 refrigerant, and enhanced sound-dampening design for quiet operation. Goodman AMVT60DP1300 Air Handler: Goodman AMVT multi-position, variable-speed ECM air handler with an all-aluminum coil, ComfortBridge technology, and a factory-installed TXV, compatible with Goodman communicating heat pump and AC systems. Goodman HKTSD20DB Heat Kit: Goodman HKTSD electric heat kit accessory for AMST-series air handlers, factory-assembled and tested with plug-in wiring harness, sequencer staging, and a fuse-link high-temperature limit control. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Heat Pump Kit (Condenser + Air Handler & Heat Kit) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Electric heat kit factory-matched heat strip, field-installed and wired to OEM spec Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, your technician will note it on your estimate before work begins. SPECIFICATIONS Bundle Size/Tonnage 4 Ton Bundle Cooling Efficiency (SEER2) 17 SEER2 Condenser Model GLZT7CA4810 Condenser Stages Single Stage Air Handler Model AMVT60DP1300 Air Handler Blower Variable Speed Heat Kit Model HKTSD20DB Heat Source Heat Pump w/ Electric Backup AHRI 215657366 Refrigerant R-32 Warranty 10-Year Parts, 10-Year Compressor (When Registered with OEM) RESOURCES Condenser Air Handler LIMITED WARRANTY LIMITED WARRANTY SPEC SHEET SPEC SHEET

Read more less

The Goodman HVAC system offered by Manor Heat and Air combines an energy-efficient condenser, a reliable heating component, and a high-performance evaporator coil to provide consistent heating and cooling for small to medium-sized homes in Manor, TX. Engineered for durability and comfort, it ensures year-round indoor climate control. What's Included: Goodman GLZT7CA2410 Heat Pump Condenser: Goodman GLZT7C two-stage heat pump delivering up to 17.5 SEER2 and 8.2 HSPF2, with a two-stage scroll compressor, R-32 refrigerant, and enhanced sound-dampening design for quiet operation. Goodman AMVT30BP1300 Air Handler: Goodman AMVT multi-position, variable-speed ECM air handler with an all-aluminum coil, ComfortBridge technology, and a factory-installed TXV, compatible with Goodman communicating heat pump and AC systems. Goodman HKTSD08X1 Heat Kit: Goodman HKTSD electric heat kit accessory for AMST-series air handlers, factory-assembled and tested with plug-in wiring harness, sequencer staging, and a fuse-link high-temperature limit control. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Heat Pump Kit (Condenser + Air Handler & Heat Kit) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Electric heat kit factory-matched heat strip, field-installed and wired to OEM spec Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, your technician will note it on your estimate before work begins. SPECIFICATIONS Bundle Size/Tonnage 2 Ton Bundle Cooling Efficiency (SEER2) 17 SEER2 Condenser Model GLZT7CA2410 Condenser Stages Single Stage Air Handler Model AMVT30BP1300 Air Handler Blower Variable Speed Heat Kit Model HKTSD08X1 Heat Source Heat Pump w/ Electric Backup AHRI 215657363 Refrigerant R-32 Warranty 10-Year Parts, 10-Year Compressor (When Registered with OEM) RESOURCES Condenser Air Handler LIMITED WARRANTY LIMITED WARRANTY SPEC SHEET SPEC SHEET

Read more less

The Goodman HVAC system offered by Manor Heat and Air combines an energy-efficient condenser, a reliable heating component, and a high-performance evaporator coil to provide consistent heating and cooling for small to medium-sized homes in Manor, TX. Engineered for durability and comfort, it ensures year-round indoor climate control. What's Included: Goodman GLZS4BA6010 Heat Pump Condenser: Goodman GLZS4B single-stage heat pump delivering up to 15.2 SEER2 and 7.8 HSPF2, with an energy-efficient compressor, SmartShift technology for quiet, reliable defrost, and enhanced aluminum-fin coils. Goodman AMST60DU1300 Air Handler: Goodman AMST energy-efficient, multi-position, multi-speed ECM air handler with a factory-installed TXV, all-aluminum evaporator coil, optimized for pairing with single-stage AC or heat-pump condensers. Goodman HKTSD20DB Heat Kit: Goodman HKTSD electric heat kit accessory for AMST-series air handlers, factory-assembled and tested with plug-in wiring harness, sequencer staging, and a fuse-link high-temperature limit control. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Heat Pump Kit (Condenser + Air Handler & Heat Kit) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Electric heat kit factory-matched heat strip, field-installed and wired to OEM spec Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, your technician will note it on your estimate before work begins. SPECIFICATIONS Bundle Size/Tonnage 5 Ton Bundle Cooling Efficiency (SEER2) 14.3 SEER2 Condenser Model GLZS4BA6010 Condenser Stages Single Stage Air Handler Model AMST60DU1300 Air Handler Blower Constant Heat Kit Model HKTSD20DB Heat Source Heat Pump w/ Electric Backup AHRI 215213862 Refrigerant R-32 Warranty 10-Year Parts, 10-Year Compressor (When Registered with OEM) RESOURCES Condenser Air Handler LIMITED WARRANTY LIMITED WARRANTY SPEC SHEET SPEC SHEET

Read more less

The Goodman HVAC system offered by Manor Heat and Air combines an energy-efficient condenser, a reliable heating component, and a high-performance evaporator coil to provide consistent heating and cooling for small to medium-sized homes in Manor, TX. Engineered for durability and comfort, it ensures year-round indoor climate control. What's Included: Goodman GLZS5BA3610 Heat Pump Condenser: Goodman GLZS5B single-stage heat pump rated up to 16 SEER2 and 8.2 HSPF2, a step above the GLZS4 tier, with an energy-efficient compressor and durable, corrosion-resistant cabinet. Goodman AMST42CU1300 Air Handler: Goodman AMST energy-efficient, multi-position, multi-speed ECM air handler with a factory-installed TXV, all-aluminum evaporator coil, optimized for pairing with single-stage AC or heat-pump condensers. Goodman HKTSD15XB Heat Kit: Goodman HKTSD electric heat kit accessory for AMST-series air handlers, factory-assembled and tested with plug-in wiring harness, sequencer staging, and a fuse-link high-temperature limit control. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Heat Pump Kit (Condenser + Air Handler & Heat Kit) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Electric heat kit factory-matched heat strip, field-installed and wired to OEM spec Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, your technician will note it on your estimate before work begins. SPECIFICATIONS Bundle Size/Tonnage 3 Ton Bundle Cooling Efficiency (SEER2) 15 SEER2 Condenser Model GLZS5BA3610 Condenser Stages Single Stage Air Handler Model AMST42CU1300 Air Handler Blower Constant Heat Kit Model HKTSD15XB Heat Source Heat Pump w/ Electric Backup AHRI 215381162 Refrigerant R-32 Warranty 10-Year Parts, 10-Year Compressor (When Registered with OEM) RESOURCES Condenser Air Handler LIMITED WARRANTY LIMITED WARRANTY SPEC SHEET SPEC SHEET

Read more less

The Goodman HVAC system offered by Manor Heat and Air combines an energy-efficient condenser, a reliable heating component, and a high-performance evaporator coil to provide consistent heating and cooling for small to medium-sized homes in Manor, TX. Engineered for durability and comfort, it ensures year-round indoor climate control. What's Included: Goodman GLZS5BA2410 Heat Pump Condenser: Goodman GLZS5B single-stage heat pump rated up to 16 SEER2 and 8.2 HSPF2, a step above the GLZS4 tier, with an energy-efficient compressor and durable, corrosion-resistant cabinet. Goodman AMST24BU1300 Air Handler: Goodman AMST energy-efficient, multi-position, multi-speed ECM air handler with a factory-installed TXV, all-aluminum evaporator coil, optimized for pairing with single-stage AC or heat-pump condensers. Goodman HKTSD08X1 Heat Kit: Goodman HKTSD electric heat kit accessory for AMST-series air handlers, factory-assembled and tested with plug-in wiring harness, sequencer staging, and a fuse-link high-temperature limit control. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Heat Pump Kit (Condenser + Air Handler & Heat Kit) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Electric heat kit factory-matched heat strip, field-installed and wired to OEM spec Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, your technician will note it on your estimate before work begins. SPECIFICATIONS Bundle Size/Tonnage 2 Ton Bundle Cooling Efficiency (SEER2) 15 SEER2 Condenser Model GLZS5BA2410 Condenser Stages Single Stage Air Handler Model AMST24BU1300 Air Handler Blower Constant Heat Kit Model HKTSD08X1 Heat Source Heat Pump w/ Electric Backup AHRI 215381160 Refrigerant R-32 Warranty 10-Year Parts, 10-Year Compressor (When Registered with OEM) RESOURCES Condenser Air Handler LIMITED WARRANTY LIMITED WARRANTY SPEC SHEET SPEC SHEET

Read more less

The Goodman HVAC system offered by Manor Heat and Air combines an energy-efficient condenser, a reliable heating component, and a high-performance evaporator coil to provide consistent heating and cooling for small to medium-sized homes in Manor, TX. Engineered for durability and comfort, it ensures year-round indoor climate control. What's Included: Goodman GLZS5BA3010 Heat Pump Condenser: Goodman GLZS5B single-stage heat pump rated up to 16 SEER2 and 8.2 HSPF2, a step above the GLZS4 tier, with an energy-efficient compressor and durable, corrosion-resistant cabinet. Goodman AMST30BU1300 Air Handler: Goodman AMST energy-efficient, multi-position, multi-speed ECM air handler with a factory-installed TXV, all-aluminum evaporator coil, optimized for pairing with single-stage AC or heat-pump condensers. Goodman HKTSD10X1 Heat Kit: Goodman HKTSD electric heat kit accessory for AMST-series air handlers, factory-assembled and tested with plug-in wiring harness, sequencer staging, and a fuse-link high-temperature limit control. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Heat Pump Kit (Condenser + Air Handler & Heat Kit) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Electric heat kit factory-matched heat strip, field-installed and wired to OEM spec Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, your technician will note it on your estimate before work begins. SPECIFICATIONS Bundle Size/Tonnage 2.5 Ton Bundle Cooling Efficiency (SEER2) 15 SEER2 Condenser Model GLZS5BA3010 Condenser Stages Single Stage Air Handler Model AMST30BU1300 Air Handler Blower Constant Heat Kit Model HKTSD10X1 Heat Source Heat Pump w/ Electric Backup AHRI 215381161 Refrigerant R-32 Warranty 10-Year Parts, 10-Year Compressor (When Registered with OEM) RESOURCES Condenser Air Handler LIMITED WARRANTY LIMITED WARRANTY SPEC SHEET SPEC SHEET

Read more less

The Goodman HVAC system offered by Manor Heat and Air combines an energy-efficient condenser, a reliable heating component, and a high-performance evaporator coil to provide consistent heating and cooling for small to medium-sized homes in Manor, TX. Engineered for durability and comfort, it ensures year-round indoor climate control. What's Included: Goodman GLZT7CA6010 Heat Pump Condenser: Goodman GLZT7C two-stage heat pump delivering up to 17.5 SEER2 and 8.2 HSPF2, with a two-stage scroll compressor, R-32 refrigerant, and enhanced sound-dampening design for quiet operation. Goodman AMVT60DP1300 Air Handler: Goodman AMVT multi-position, variable-speed ECM air handler with an all-aluminum coil, ComfortBridge technology, and a factory-installed TXV, compatible with Goodman communicating heat pump and AC systems. Goodman HKTSD20DB Heat Kit: Goodman HKTSD electric heat kit accessory for AMST-series air handlers, factory-assembled and tested with plug-in wiring harness, sequencer staging, and a fuse-link high-temperature limit control. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Heat Pump Kit (Condenser + Air Handler & Heat Kit) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Electric heat kit factory-matched heat strip, field-installed and wired to OEM spec Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, your technician will note it on your estimate before work begins. SPECIFICATIONS Bundle Size/Tonnage 5 Ton Bundle Cooling Efficiency (SEER2) 17 SEER2 Condenser Model GLZT7CA6010 Condenser Stages Single Stage Air Handler Model AMVT60DP1300 Air Handler Blower Variable Speed Heat Kit Model HKTSD20DB Heat Source Heat Pump w/ Electric Backup AHRI 215657368 Refrigerant R-32 Warranty 10-Year Parts, 10-Year Compressor (When Registered with OEM) RESOURCES Condenser Air Handler LIMITED WARRANTY LIMITED WARRANTY SPEC SHEET SPEC SHEET

Read more less

The Goodman HVAC system offered by Manor Heat and Air combines an energy-efficient condenser, a reliable heating component, and a high-performance evaporator coil to provide consistent heating and cooling for small to medium-sized homes in Manor, TX. Engineered for durability and comfort, it ensures year-round indoor climate control. What's Included: Goodman GLZS4BA3610 Heat Pump Condenser: Goodman GLZS4B single-stage heat pump delivering up to 15.2 SEER2 and 7.8 HSPF2, with an energy-efficient compressor, SmartShift technology for quiet, reliable defrost, and enhanced aluminum-fin coils. Goodman AMST36CU1300 Air Handler: Goodman AMST energy-efficient, multi-position, multi-speed ECM air handler with a factory-installed TXV, all-aluminum evaporator coil, optimized for pairing with single-stage AC or heat-pump condensers. Goodman HKTSD15XB Heat Kit: Goodman HKTSD electric heat kit accessory for AMST-series air handlers, factory-assembled and tested with plug-in wiring harness, sequencer staging, and a fuse-link high-temperature limit control. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Heat Pump Kit (Condenser + Air Handler & Heat Kit) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Electric heat kit factory-matched heat strip, field-installed and wired to OEM spec Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, your technician will note it on your estimate before work begins. SPECIFICATIONS Bundle Size/Tonnage 3 Ton Bundle Cooling Efficiency (SEER2) 14.3 SEER2 Condenser Model GLZS4BA3610 Condenser Stages Single Stage Air Handler Model AMST36CU1300 Air Handler Blower Constant Heat Kit Model HKTSD15XB Heat Source Heat Pump w/ Electric Backup AHRI 215213859 Refrigerant R-32 Warranty 10-Year Parts, 10-Year Compressor (When Registered with OEM) RESOURCES Condenser Air Handler LIMITED WARRANTY LIMITED WARRANTY SPEC SHEET SPEC SHEET

Read more less

The Goodman HVAC system offered by Manor Heat and Air combines an energy-efficient condenser, a reliable heating component, and a high-performance evaporator coil to provide consistent heating and cooling for small to medium-sized homes in Manor, TX. Engineered for durability and comfort, it ensures year-round indoor climate control. What's Included: Goodman GLZT7CA3610 Heat Pump Condenser: Goodman GLZT7C two-stage heat pump delivering up to 17.5 SEER2 and 8.2 HSPF2, with a two-stage scroll compressor, R-32 refrigerant, and enhanced sound-dampening design for quiet operation. Goodman AMVT42CP1300 Air Handler: Goodman AMVT multi-position, variable-speed ECM air handler with an all-aluminum coil, ComfortBridge technology, and a factory-installed TXV, compatible with Goodman communicating heat pump and AC systems. Goodman HKTSD15XB Heat Kit: Goodman HKTSD electric heat kit accessory for AMST-series air handlers, factory-assembled and tested with plug-in wiring harness, sequencer staging, and a fuse-link high-temperature limit control. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Heat Pump Kit (Condenser + Air Handler & Heat Kit) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Electric heat kit factory-matched heat strip, field-installed and wired to OEM spec Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, your technician will note it on your estimate before work begins. SPECIFICATIONS Bundle Size/Tonnage 3 Ton Bundle Cooling Efficiency (SEER2) 17 SEER2 Condenser Model GLZT7CA3610 Condenser Stages Single Stage Air Handler Model AMVT42CP1300 Air Handler Blower Variable Speed Heat Kit Model HKTSD15XB Heat Source Heat Pump w/ Electric Backup AHRI 215657364 Refrigerant R-32 Warranty 10-Year Parts, 10-Year Compressor (When Registered with OEM) RESOURCES Condenser Air Handler LIMITED WARRANTY LIMITED WARRANTY SPEC SHEET SPEC SHEET

Read more less

The Goodman HVAC system offered by Manor Heat and Air combines an energy-efficient condenser, a reliable heating component, and a high-performance evaporator coil to provide consistent heating and cooling for small to medium-sized homes in Manor, TX. Engineered for durability and comfort, it ensures year-round indoor climate control. What's Included: Goodman GLZS4BA1810 Heat Pump Condenser: Goodman GLZS4B single-stage heat pump delivering up to 15.2 SEER2 and 7.8 HSPF2, with an energy-efficient compressor, SmartShift technology for quiet, reliable defrost, and enhanced aluminum-fin coils. Goodman AMST24BU1300 Air Handler: Goodman AMST energy-efficient, multi-position, multi-speed ECM air handler with a factory-installed TXV, all-aluminum evaporator coil, optimized for pairing with single-stage AC or heat-pump condensers. Goodman HKTSD08X1 Heat Kit: Goodman HKTSD electric heat kit accessory for AMST-series air handlers, factory-assembled and tested with plug-in wiring harness, sequencer staging, and a fuse-link high-temperature limit control. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Heat Pump Kit (Condenser + Air Handler & Heat Kit) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Electric heat kit factory-matched heat strip, field-installed and wired to OEM spec Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, your technician will note it on your estimate before work begins. SPECIFICATIONS Bundle Size/Tonnage 1.5 Ton Bundle Cooling Efficiency (SEER2) 14.3 SEER2 Condenser Model GLZS4BA1810 Condenser Stages Single Stage Air Handler Model AMST24BU1300 Air Handler Blower Constant Heat Kit Model HKTSD08X1 Heat Source Heat Pump w/ Electric Backup AHRI 215213817 Refrigerant R-32 Warranty 10-Year Parts, 10-Year Compressor (When Registered with OEM) RESOURCES Condenser Air Handler LIMITED WARRANTY LIMITED WARRANTY SPEC SHEET SPEC SHEET

Read more less

The Goodman HVAC system offered by Manor Heat and Air combines an energy-efficient condenser, a reliable heating component, and a high-performance evaporator coil to provide consistent heating and cooling for small to medium-sized homes in Manor, TX. Engineered for durability and comfort, it ensures year-round indoor climate control. What's Included: Goodman GLZS4BA4210 Heat Pump Condenser: Goodman GLZS4B single-stage heat pump delivering up to 15.2 SEER2 and 7.8 HSPF2, with an energy-efficient compressor, SmartShift technology for quiet, reliable defrost, and enhanced aluminum-fin coils. Goodman AMST42CU1300 Air Handler: Goodman AMST energy-efficient, multi-position, multi-speed ECM air handler with a factory-installed TXV, all-aluminum evaporator coil, optimized for pairing with single-stage AC or heat-pump condensers. Goodman HKTSD15XB Heat Kit: Goodman HKTSD electric heat kit accessory for AMST-series air handlers, factory-assembled and tested with plug-in wiring harness, sequencer staging, and a fuse-link high-temperature limit control. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Heat Pump Kit (Condenser + Air Handler & Heat Kit) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Electric heat kit factory-matched heat strip, field-installed and wired to OEM spec Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, your technician will note it on your estimate before work begins. SPECIFICATIONS Bundle Size/Tonnage 3.5 Ton Bundle Cooling Efficiency (SEER2) 14.3 SEER2 Condenser Model GLZS4BA4210 Condenser Stages Single Stage Air Handler Model AMST42CU1300 Air Handler Blower Constant Heat Kit Model HKTSD15XB Heat Source Heat Pump w/ Electric Backup AHRI 215213860 Refrigerant R-32 Warranty 10-Year Parts, 10-Year Compressor (When Registered with OEM) RESOURCES Condenser Air Handler LIMITED WARRANTY LIMITED WARRANTY SPEC SHEET SPEC SHEET

Read more less

The Goodman HVAC system offered by Manor Heat and Air combines an energy-efficient condenser, a reliable heating component, and a high-performance evaporator coil to provide consistent heating and cooling for small to medium-sized homes in Manor, TX. Engineered for durability and comfort, it ensures year-round indoor climate control. What's Included: Goodman GLZS4BA2410 Heat Pump Condenser: Goodman GLZS4B single-stage heat pump delivering up to 15.2 SEER2 and 7.8 HSPF2, with an energy-efficient compressor, SmartShift technology for quiet, reliable defrost, and enhanced aluminum-fin coils. Goodman AMST24BU1300 Air Handler: Goodman AMST energy-efficient, multi-position, multi-speed ECM air handler with a factory-installed TXV, all-aluminum evaporator coil, optimized for pairing with single-stage AC or heat-pump condensers. Goodman HKTSD08X1 Heat Kit: Goodman HKTSD electric heat kit accessory for AMST-series air handlers, factory-assembled and tested with plug-in wiring harness, sequencer staging, and a fuse-link high-temperature limit control. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Heat Pump Kit (Condenser + Air Handler & Heat Kit) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Electric heat kit factory-matched heat strip, field-installed and wired to OEM spec Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, your technician will note it on your estimate before work begins. SPECIFICATIONS Bundle Size/Tonnage 2 Ton Bundle Cooling Efficiency (SEER2) 14.3 SEER2 Condenser Model GLZS4BA2410 Condenser Stages Single Stage Air Handler Model AMST24BU1300 Air Handler Blower Constant Heat Kit Model HKTSD08X1 Heat Source Heat Pump w/ Electric Backup AHRI 215213871 Refrigerant R-32 Warranty 10-Year Parts, 10-Year Compressor (When Registered with OEM) RESOURCES Condenser Air Handler LIMITED WARRANTY LIMITED WARRANTY SPEC SHEET SPEC SHEET

Read more less

The Goodman HVAC system offered by Manor Heat and Air combines an energy-efficient condenser, a reliable heating component, and a high-performance evaporator coil to provide consistent heating and cooling for small to medium-sized homes in Manor, TX. Engineered for durability and comfort, it ensures year-round indoor climate control. What's Included: Goodman GLZS4BA4810 Heat Pump Condenser: Goodman GLZS4B single-stage heat pump delivering up to 15.2 SEER2 and 7.8 HSPF2, with an energy-efficient compressor, SmartShift technology for quiet, reliable defrost, and enhanced aluminum-fin coils. Goodman AMST48CU1300 Air Handler: Goodman AMST energy-efficient, multi-position, multi-speed ECM air handler with a factory-installed TXV, all-aluminum evaporator coil, optimized for pairing with single-stage AC or heat-pump condensers. Goodman HKTSD15XB Heat Kit: Goodman HKTSD electric heat kit accessory for AMST-series air handlers, factory-assembled and tested with plug-in wiring harness, sequencer staging, and a fuse-link high-temperature limit control. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Heat Pump Kit (Condenser + Air Handler & Heat Kit) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Electric heat kit factory-matched heat strip, field-installed and wired to OEM spec Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, your technician will note it on your estimate before work begins. SPECIFICATIONS Bundle Size/Tonnage 4 Ton Bundle Cooling Efficiency (SEER2) 14.3 SEER2 Condenser Model GLZS4BA4810 Condenser Stages Single Stage Air Handler Model AMST48CU1300 Air Handler Blower Constant Heat Kit Model HKTSD15XB Heat Source Heat Pump w/ Electric Backup AHRI 215213861 Refrigerant R-32 Warranty 10-Year Parts, 10-Year Compressor (When Registered with OEM) RESOURCES Condenser Air Handler LIMITED WARRANTY LIMITED WARRANTY SPEC SHEET SPEC SHEET

Read more less

The Goodman HVAC system offered by Manor Heat and Air combines an energy-efficient condenser, a reliable heating component, and a high-performance evaporator coil to provide consistent heating and cooling for small to medium-sized homes in Manor, TX. Engineered for durability and comfort, it ensures year-round indoor climate control. What's Included: Goodman GLXS4BA3010 Condenser: Goodman GLXS4B single-stage air conditioner rated up to 15.2 SEER2, with an energy-efficient compressor, copper tube/enhanced aluminum-fin coil, and factory-installed filter drier. Goodman GR9S800603BN Furnace: Goodman GR9S80 single-stage, multi-speed ECM, multi-position gas furnace at 80% AFUE, with a heavy-duty aluminized-steel dual-diameter tubular heat exchanger, hot-surface igniter, and self-diagnostic control board. Goodman CAPTA3626B3 Evaporator Coil: Goodman CHPTA/CAPTA cased upflow/downflow/horizontal evaporator coil with internal TXV, all-aluminum construction, and an insulated, compact cabinet for space-limited installations. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, your technician will note it on your estimate before work begins. SPECIFICATIONS Bundle Size/Tonnage 2.5 Ton Bundle Cooling Efficiency (SEER2) 15.2 SEER2 Condenser Model GLXS4BA3010 Condenser Stages Single Furnace Model GR9S800603BN Furnace Stage/Blower Single Furnace Efficiency 80% Furnace Capacity (BTU) 80K Furnace Cabinet Size B Heat Source Gas Coil Model CAPTA3626B3 Coil Cabinet Size B AHRI 215214803 Refrigerant R-32 Warranty 10-Year Parts (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY SPEC SHEET SPEC SHEET SPEC SHEET

Read more less

The Goodman HVAC system offered by Manor Heat and Air combines an energy-efficient condenser, a reliable heating component, and a high-performance evaporator coil to provide consistent heating and cooling for small to medium-sized homes in Manor, TX. Engineered for durability and comfort, it ensures year-round indoor climate control. What's Included: Goodman GLXT7CA3610 Condenser: Goodman GLXT7C two-stage, high-efficiency air conditioner featuring a Copeland Ultra-Tech scroll compressor, ComfortBridge technology, and a quiet ECM fan motor. Goodman GMVC800603BN Furnace: Goodman GMVC80 two-stage, communicating gas furnace rated up to 80% AFUE with ComfortBridge technology and a constant-torque ECM blower. Goodman CHPTA3630B3 Evaporator Coil: Goodman CHPTA/CAPTA cased upflow/downflow/horizontal evaporator coil with internal TXV, all-aluminum construction, and an insulated, compact cabinet for space-limited installations. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, your technician will note it on your estimate before work begins. SPECIFICATIONS Bundle Size/Tonnage 3 Ton Bundle Cooling Efficiency (SEER2) 17 SEER2 Condenser Model GLXT7CA3610 Condenser Stages Single Furnace Model GMVC800603BN Furnace Stage/Blower Two Furnace Efficiency 80% Furnace Capacity (BTU) 80K Furnace Cabinet Size B Heat Source Gas Coil Model CHPTA3630B3 Coil Cabinet Size B AHRI 215865789 Refrigerant R-32 Warranty 10-Year Parts (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY SPEC SHEET SPEC SHEET SPEC SHEET

Read more less

The Goodman HVAC system offered by Manor Heat and Air combines an energy-efficient condenser, a reliable heating component, and a high-performance evaporator coil to provide consistent heating and cooling for small to medium-sized homes in Manor, TX. Engineered for durability and comfort, it ensures year-round indoor climate control. What's Included: Goodman GLXT7CA4810 Condenser: Goodman GLXT7C two-stage, high-efficiency air conditioner featuring a Copeland Ultra-Tech scroll compressor, ComfortBridge technology, and a quiet ECM fan motor. Goodman GRVT960804CNA Furnace: Goodman GRVT96 two-stage gas furnace rated up to 97.5% AFUE with ComfortBridge technology, a variable-speed ECM blower, and a two-stage gas valve for consistent, energy-efficient heating. Goodman CAPTA6030C3 Evaporator Coil: Goodman CHPTA/CAPTA cased upflow/downflow/horizontal evaporator coil with internal TXV, all-aluminum construction, and an insulated, compact cabinet for space-limited installations. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, your technician will note it on your estimate before work begins. SPECIFICATIONS Bundle Size/Tonnage 4 Ton Bundle Cooling Efficiency (SEER2) 17.2 SEER2 Condenser Model GLXT7CA4810 Condenser Stages Two-Stage Furnace Model GRVT960804CNA Furnace Stage/Blower Two-Stage/Variable Furnace Efficiency 96% Furnace Capacity (BTU) 80K Furnace Cabinet Size C Heat Source Gas Coil Model CAPTA6030C3 Coil Cabinet Size C AHRI 216614952 Refrigerant R-32 Warranty 10-Year Parts (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY SPEC SHEET SPEC SHEET SPEC SHEET

Read more less

The Goodman HVAC system offered by Manor Heat and Air combines an energy-efficient condenser, a reliable heating component, and a high-performance evaporator coil to provide consistent heating and cooling for small to medium-sized homes in Manor, TX. Engineered for durability and comfort, it ensures year-round indoor climate control. What's Included: Goodman GLZS4BA3010 Heat Pump Condenser: Goodman GLZS4B single-stage heat pump delivering up to 15.2 SEER2 and 7.8 HSPF2, with an energy-efficient compressor, SmartShift technology for quiet, reliable defrost, and enhanced aluminum-fin coils. Goodman AMST30BU1300 Air Handler: Goodman AMST energy-efficient, multi-position, multi-speed ECM air handler with a factory-installed TXV, all-aluminum evaporator coil, optimized for pairing with single-stage AC or heat-pump condensers. Goodman HKTSD10X1 Heat Kit: Goodman HKTSD electric heat kit accessory for AMST-series air handlers, factory-assembled and tested with plug-in wiring harness, sequencer staging, and a fuse-link high-temperature limit control. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Heat Pump Kit (Condenser + Air Handler & Heat Kit) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Electric heat kit factory-matched heat strip, field-installed and wired to OEM spec Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, your technician will note it on your estimate before work begins. SPECIFICATIONS Bundle Size/Tonnage 2.5 Ton Bundle Cooling Efficiency (SEER2) 14.3 SEER2 Condenser Model GLZS4BA3010 Condenser Stages Single Stage Air Handler Model AMST30BU1300 Air Handler Blower Constant Heat Kit Model HKTSD10X1 Heat Source Heat Pump w/ Electric Backup AHRI 215213872 Refrigerant R-32 Warranty 10-Year Parts, 10-Year Compressor (When Registered with OEM) RESOURCES Condenser Air Handler LIMITED WARRANTY LIMITED WARRANTY SPEC SHEET SPEC SHEET

Read more less

The Goodman HVAC system offered by Manor Heat and Air combines an energy-efficient condenser, a reliable heating component, and a high-performance evaporator coil to provide consistent heating and cooling for small to medium-sized homes in Manor, TX. Engineered for durability and comfort, it ensures year-round indoor climate control. What's Included: Goodman GLXS4BA1810 Condenser: Goodman GLXS4B single-stage air conditioner rated up to 15.2 SEER2, with an energy-efficient compressor, copper tube/enhanced aluminum-fin coil, and factory-installed filter drier. Goodman GR9S800403AN Furnace: Goodman GR9S80 single-stage, multi-speed ECM, multi-position gas furnace at 80% AFUE, with a heavy-duty aluminized-steel dual-diameter tubular heat exchanger, hot-surface igniter, and self-diagnostic control board. Goodman CAPTA1818A3 Evaporator Coil: Goodman CHPTA/CAPTA cased upflow/downflow/horizontal evaporator coil with internal TXV, all-aluminum construction, and an insulated, compact cabinet for space-limited installations. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, your technician will note it on your estimate before work begins. SPECIFICATIONS Bundle Size/Tonnage 1.5 Ton Bundle Cooling Efficiency (SEER2) 14.5 SEER2 Condenser Model GLXS4BA1810 Condenser Stages Single Furnace Model GR9S800403AN Furnace Stage/Blower Single Furnace Efficiency 80% Furnace Capacity (BTU) 60K Furnace Cabinet Size A Heat Source Gas Coil Model CAPTA1818A3 Coil Cabinet Size A AHRI 215214549 Refrigerant R-32 Warranty 10-Year Parts (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY SPEC SHEET SPEC SHEET SPEC SHEET

Read more less

The Goodman HVAC system offered by Manor Heat and Air combines an energy-efficient condenser, a reliable heating component, and a high-performance evaporator coil to provide consistent heating and cooling for small to medium-sized homes in Manor, TX. Engineered for durability and comfort, it ensures year-round indoor climate control. What's Included: Goodman GLXS4BA3010 Condenser: Goodman GLXS4B single-stage air conditioner rated up to 15.2 SEER2, with an energy-efficient compressor, copper tube/enhanced aluminum-fin coil, and factory-installed filter drier. Goodman GR9S800603AN Furnace: Goodman GR9S80 single-stage, multi-speed ECM, multi-position gas furnace at 80% AFUE, with a heavy-duty aluminized-steel dual-diameter tubular heat exchanger, hot-surface igniter, and self-diagnostic control board. Goodman CHPTA3026B3 Evaporator Coil: Goodman CHPTA/CAPTA cased upflow/downflow/horizontal evaporator coil with internal TXV, all-aluminum construction, and an insulated, compact cabinet for space-limited installations. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, your technician will note it on your estimate before work begins. SPECIFICATIONS Bundle Size/Tonnage 2.5 Ton Bundle Cooling Efficiency (SEER2) 14.3 SEER2 Condenser Model GLXS4BA3010 Condenser Stages Single Furnace Model GR9S800603AN Furnace Stage/Blower Single Furnace Efficiency 80% Furnace Capacity (BTU) 60K Furnace Cabinet Size B Heat Source Gas Coil Model CHPTA3026B3 Coil Cabinet Size B AHRI 215214842 Refrigerant R-32 Warranty 10-Year Parts (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY SPEC SHEET SPEC SHEET SPEC SHEET

Read more less

The Goodman HVAC system offered by Manor Heat and Air combines an energy-efficient condenser, a reliable heating component, and a high-performance evaporator coil to provide consistent heating and cooling for small to medium-sized homes in Manor, TX. Engineered for durability and comfort, it ensures year-round indoor climate control. What's Included: Goodman GXV6SS4210A Condenser: Goodman GXV6S two-stage, high-efficiency air conditioner with an energy-efficient compressor and enhanced aluminum-fin coil for reliable, quiet cooling performance. Goodman GRVT960804CNA Furnace: Goodman GRVT96 two-stage gas furnace rated up to 97.5% AFUE with ComfortBridge technology, a variable-speed ECM blower, and a two-stage gas valve for consistent, energy-efficient heating. Goodman CAPEA4830C3 Evaporator Coil: Goodman CHPTA/CAPTA cased upflow/downflow/horizontal evaporator coil with internal TXV, all-aluminum construction, and an insulated, compact cabinet for space-limited installations. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, your technician will note it on your estimate before work begins. SPECIFICATIONS Bundle Size/Tonnage 3.5 Ton Bundle Cooling Efficiency (SEER2) 17 SEER2 Condenser Model GXV6SS4210A Condenser Stages Variable Speed Furnace Model GRVT960804CNA Furnace Stage/Blower Two-Stage/Variable Furnace Efficiency 96% Furnace Capacity (BTU) 80K Furnace Cabinet Size C Heat Source Gas Coil Model CAPEA4830C3 Coil Cabinet Size C AHRI 215490438 Refrigerant R-32 Warranty 10-Year Parts (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY SPEC SHEET SPEC SHEET SPEC SHEET

Read more less