The Goodman HVAC system offered by Manor Heat and Air combines an energy-efficient condenser, a reliable heating component, and a high-performance evaporator coil to provide consistent heating and cooling for small to medium-sized homes in Manor, TX. Engineered for durability and comfort, it ensures year-round indoor climate control. What's Included: Goodman GLXS5BA3010 Condenser: Goodman GLXS5B single-stage air conditioner, a step above the GLXS4 tier, with an energy-efficient compressor, durable cabinet construction, and enhanced coil design for reliable cooling performance. Goodman GR9S800603BN Furnace: Goodman GR9S80 single-stage, multi-speed ECM, multi-position gas furnace at 80% AFUE, with a heavy-duty aluminized-steel dual-diameter tubular heat exchanger, hot-surface igniter, and self-diagnostic control board. Goodman CHPTA3026B3 Evaporator Coil: Goodman CHPTA/CAPTA cased upflow/downflow/horizontal evaporator coil with internal TXV, all-aluminum construction, and an insulated, compact cabinet for space-limited installations. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, your technician will note it on your estimate before work begins. SPECIFICATIONS Bundle Size/Tonnage 2.5 Ton Bundle Cooling Efficiency (SEER2) 15.2 SEER2 Condenser Model GLXS5BA3010 Condenser Stages Single Furnace Model GR9S800603BN Furnace Stage/Blower Single Furnace Efficiency 80% Furnace Capacity (BTU) 60K Furnace Cabinet Size B Heat Source Gas Coil Model CHPTA3026B3 Coil Cabinet Size B AHRI 215380567 Refrigerant R-32 Warranty 10-Year Parts (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY SPEC SHEET SPEC SHEET SPEC SHEET

Read more less

The Goodman HVAC system offered by Manor Heat and Air combines an energy-efficient condenser, a reliable heating component, and a high-performance evaporator coil to provide consistent heating and cooling for small to medium-sized homes in Manor, TX. Engineered for durability and comfort, it ensures year-round indoor climate control. What's Included: Goodman GLXS5BA3610 Condenser: Goodman GLXS5B single-stage air conditioner, a step above the GLXS4 tier, with an energy-efficient compressor, durable cabinet construction, and enhanced coil design for reliable cooling performance. Goodman GR9S800804CN Furnace: Goodman GR9S80 single-stage, multi-speed ECM, multi-position gas furnace at 80% AFUE, with a heavy-duty aluminized-steel dual-diameter tubular heat exchanger, hot-surface igniter, and self-diagnostic control board. Goodman CHPTA3630C3 Evaporator Coil: Goodman CHPTA/CAPTA cased upflow/downflow/horizontal evaporator coil with internal TXV, all-aluminum construction, and an insulated, compact cabinet for space-limited installations. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, your technician will note it on your estimate before work begins. SPECIFICATIONS Bundle Size/Tonnage 3 Ton Bundle Cooling Efficiency (SEER2) 16 SEER2 Condenser Model GLXS5BA3610 Condenser Stages Single Furnace Model GR9S800804CN Furnace Stage/Blower Single Furnace Efficiency 80% Furnace Capacity (BTU) 80K Furnace Cabinet Size C Heat Source Gas Coil Model CHPTA3630C3 Coil Cabinet Size C AHRI 215380772 Refrigerant R-32 Warranty 10-Year Parts (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY SPEC SHEET SPEC SHEET SPEC SHEET

Read more less

The Goodman HVAC system offered by Manor Heat and Air combines an energy-efficient condenser, a reliable heating component, and a high-performance evaporator coil to provide consistent heating and cooling for small to medium-sized homes in Manor, TX. Engineered for durability and comfort, it ensures year-round indoor climate control. What's Included: Goodman GLXS5BA4210 Condenser: Goodman GLXS5B single-stage air conditioner, a step above the GLXS4 tier, with an energy-efficient compressor, durable cabinet construction, and enhanced coil design for reliable cooling performance. Goodman GR9S800804CN Furnace: Goodman GR9S80 single-stage, multi-speed ECM, multi-position gas furnace at 80% AFUE, with a heavy-duty aluminized-steel dual-diameter tubular heat exchanger, hot-surface igniter, and self-diagnostic control board. Goodman CHPTA4230C3 Evaporator Coil: Goodman CHPTA/CAPTA cased upflow/downflow/horizontal evaporator coil with internal TXV, all-aluminum construction, and an insulated, compact cabinet for space-limited installations. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, your technician will note it on your estimate before work begins. SPECIFICATIONS Bundle Size/Tonnage 3.5 Ton Bundle Cooling Efficiency (SEER2) 15.2 SEER2 Condenser Model GLXS5BA4210 Condenser Stages Single Furnace Model GR9S800804CN Furnace Stage/Blower Single Furnace Efficiency 80% Furnace Capacity (BTU) 80K Furnace Cabinet Size C Heat Source Gas Coil Model CHPTA4230C3 Coil Cabinet Size C AHRI 215380958 Refrigerant R-32 Warranty 10-Year Parts (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY SPEC SHEET SPEC SHEET SPEC SHEET

Read more less

The Goodman HVAC system offered by Manor Heat and Air combines an energy-efficient condenser, a reliable heating component, and a high-performance evaporator coil to provide consistent heating and cooling for small to medium-sized homes in Manor, TX. Engineered for durability and comfort, it ensures year-round indoor climate control. What's Included: Goodman GLXS5BA1810 Condenser: Goodman GLXS5B single-stage air conditioner, a step above the GLXS4 tier, with an energy-efficient compressor, durable cabinet construction, and enhanced coil design for reliable cooling performance. Goodman GR9S800603BN Furnace: Goodman GR9S80 single-stage, multi-speed ECM, multi-position gas furnace at 80% AFUE, with a heavy-duty aluminized-steel dual-diameter tubular heat exchanger, hot-surface igniter, and self-diagnostic control board. Goodman CHPTA2426B3 Evaporator Coil: Goodman CHPTA/CAPTA cased upflow/downflow/horizontal evaporator coil with internal TXV, all-aluminum construction, and an insulated, compact cabinet for space-limited installations. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, your technician will note it on your estimate before work begins. SPECIFICATIONS Bundle Size/Tonnage 1.5 Ton Bundle Cooling Efficiency (SEER2) 16 SEER2 Condenser Model GLXS5BA1810 Condenser Stages Single Furnace Model GR9S800603BN Furnace Stage/Blower Single Furnace Efficiency 80% Furnace Capacity (BTU) 60K Furnace Cabinet Size B Heat Source Gas Coil Model CHPTA2426B3 Coil Cabinet Size B AHRI 215380137 Refrigerant R-32 Warranty 10-Year Parts (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY SPEC SHEET SPEC SHEET SPEC SHEET

Read more less

The Goodman HVAC system offered by Manor Heat and Air combines an energy-efficient condenser, a reliable heating component, and a high-performance evaporator coil to provide consistent heating and cooling for small to medium-sized homes in Manor, TX. Engineered for durability and comfort, it ensures year-round indoor climate control. What's Included: Goodman GLXT7CA4810 Condenser: Goodman GLXT7C two-stage, high-efficiency air conditioner featuring a Copeland Ultra-Tech scroll compressor, ComfortBridge technology, and a quiet ECM fan motor. Goodman GRVT800804CN Furnace: Goodman GRVT80 two-stage gas furnace rated up to 80% AFUE with a variable-speed ECM blower and a two-stage gas valve for consistent, energy-efficient heating. Goodman CHPTA4830C3 Evaporator Coil: Goodman CHPTA/CAPTA cased upflow/downflow/horizontal evaporator coil with internal TXV, all-aluminum construction, and an insulated, compact cabinet for space-limited installations. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, your technician will note it on your estimate before work begins. SPECIFICATIONS Bundle Size/Tonnage 4 Ton Bundle Cooling Efficiency (SEER2) 17.2 SEER2 Condenser Model GLXT7CA4810 Condenser Stages Single Furnace Model GRVT800804CN Furnace Stage/Blower Two Furnace Efficiency 80% Furnace Capacity (BTU) 80K Furnace Cabinet Size C Heat Source Gas Coil Model CHPTA4830C3 Coil Cabinet Size C AHRI 216614954 Refrigerant R-32 Warranty 10-Year Parts (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY SPEC SHEET SPEC SHEET SPEC SHEET

Read more less

The Goodman HVAC system offered by Manor Heat and Air combines an energy-efficient condenser, a reliable heating component, and a high-performance evaporator coil to provide consistent heating and cooling for small to medium-sized homes in Manor, TX. Engineered for durability and comfort, it ensures year-round indoor climate control. What's Included: Goodman GLXS5BA2410 Condenser: Goodman GLXS5B single-stage air conditioner, a step above the GLXS4 tier, with an energy-efficient compressor, durable cabinet construction, and enhanced coil design for reliable cooling performance. Goodman GR9S800603BN Furnace: Goodman GR9S80 single-stage, multi-speed ECM, multi-position gas furnace at 80% AFUE, with a heavy-duty aluminized-steel dual-diameter tubular heat exchanger, hot-surface igniter, and self-diagnostic control board. Goodman CHPTA3026B3 Evaporator Coil: Goodman CHPTA/CAPTA cased upflow/downflow/horizontal evaporator coil with internal TXV, all-aluminum construction, and an insulated, compact cabinet for space-limited installations. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, your technician will note it on your estimate before work begins. SPECIFICATIONS Bundle Size/Tonnage 2 Ton Bundle Cooling Efficiency (SEER2) 16 SEER2 Condenser Model GLXS5BA2410 Condenser Stages Single Furnace Model GR9S800603BN Furnace Stage/Blower Single Furnace Efficiency 80% Furnace Capacity (BTU) 60K Furnace Cabinet Size B Heat Source Gas Coil Model CHPTA3026B3 Coil Cabinet Size B AHRI 215380392 Refrigerant R-32 Warranty 10-Year Parts (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY SPEC SHEET SPEC SHEET SPEC SHEET

Read more less

The Goodman HVAC system offered by Manor Heat and Air combines an energy-efficient condenser, a reliable heating component, and a high-performance evaporator coil to provide consistent heating and cooling for small to medium-sized homes in Manor, TX. Engineered for durability and comfort, it ensures year-round indoor climate control. What's Included: Goodman GLXT7CA4810 Condenser: Goodman GLXT7C two-stage, high-efficiency air conditioner featuring a Copeland Ultra-Tech scroll compressor, ComfortBridge technology, and a quiet ECM fan motor. Goodman GRVT800804CN Furnace: Goodman GRVT80 two-stage gas furnace rated up to 80% AFUE with a variable-speed ECM blower and a two-stage gas valve for consistent, energy-efficient heating. Goodman CAPTA6030C3 Evaporator Coil: Goodman CHPTA/CAPTA cased upflow/downflow/horizontal evaporator coil with internal TXV, all-aluminum construction, and an insulated, compact cabinet for space-limited installations. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, your technician will note it on your estimate before work begins. SPECIFICATIONS Bundle Size/Tonnage 4 Ton Bundle Cooling Efficiency (SEER2) 17.5 SEER2 Condenser Model GLXT7CA4810 Condenser Stages Single Furnace Model GRVT800804CN Furnace Stage/Blower Two Furnace Efficiency 80% Furnace Capacity (BTU) 80K Furnace Cabinet Size C Heat Source Gas Coil Model CAPTA6030C3 Coil Cabinet Size C AHRI 216614951 Refrigerant R-32 Warranty 10-Year Parts (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY SPEC SHEET SPEC SHEET SPEC SHEET

Read more less

The Goodman HVAC system offered by Manor Heat and Air combines an energy-efficient condenser, a reliable heating component, and a high-performance evaporator coil to provide consistent heating and cooling for small to medium-sized homes in Manor, TX. Engineered for durability and comfort, it ensures year-round indoor climate control. What's Included: Goodman GLXT7CA6010 Condenser: Goodman GLXT7C two-stage, high-efficiency air conditioner featuring a Copeland Ultra-Tech scroll compressor, ComfortBridge technology, and a quiet ECM fan motor. Goodman GRVT801005CN Furnace: Goodman GRVT80 two-stage gas furnace rated up to 80% AFUE with a variable-speed ECM blower and a two-stage gas valve for consistent, energy-efficient heating. Goodman CHPTA6030D3 Evaporator Coil: Goodman CHPTA/CAPTA cased upflow/downflow/horizontal evaporator coil with internal TXV, all-aluminum construction, and an insulated, compact cabinet for space-limited installations. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, your technician will note it on your estimate before work begins. SPECIFICATIONS Bundle Size/Tonnage 5 Ton Bundle Cooling Efficiency (SEER2) 15.5 SEER2 Condenser Model GLXT7CA6010 Condenser Stages Single Furnace Model GRVT801005CN Furnace Stage/Blower Two Furnace Efficiency 80% Furnace Capacity (BTU) 100K Furnace Cabinet Size C Heat Source Gas Coil Model CHPTA6030D3 Coil Cabinet Size D AHRI 217655929 Refrigerant R-32 Warranty 10-Year Parts (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY SPEC SHEET SPEC SHEET SPEC SHEET

Read more less

The Goodman HVAC system offered by Manor Heat and Air combines an energy-efficient condenser, a reliable heating component, and a high-performance evaporator coil to provide consistent heating and cooling for small to medium-sized homes in Manor, TX. Engineered for durability and comfort, it ensures year-round indoor climate control. What's Included: Goodman GLXT7CA3610 Condenser: Goodman GLXT7C two-stage, high-efficiency air conditioner featuring a Copeland Ultra-Tech scroll compressor, ComfortBridge technology, and a quiet ECM fan motor. Goodman GRVT800603BN Furnace: Goodman GRVT80 two-stage gas furnace rated up to 80% AFUE with a variable-speed ECM blower and a two-stage gas valve for consistent, energy-efficient heating. Goodman CAPTA3626B3 Evaporator Coil: Goodman CHPTA/CAPTA cased upflow/downflow/horizontal evaporator coil with internal TXV, all-aluminum construction, and an insulated, compact cabinet for space-limited installations. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, your technician will note it on your estimate before work begins. SPECIFICATIONS Bundle Size/Tonnage 3 Ton Bundle Cooling Efficiency (SEER2) 17 SEER2 Condenser Model GLXT7CA3610 Condenser Stages Single Furnace Model GRVT800603BN Furnace Stage/Blower Two Furnace Efficiency 80% Furnace Capacity (BTU) 80K Furnace Cabinet Size B Heat Source Gas Coil Model CAPTA3626B3 Coil Cabinet Size B AHRI 216613814 Refrigerant R-32 Warranty 10-Year Parts (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY SPEC SHEET SPEC SHEET SPEC SHEET

Read more less

The Goodman HVAC system offered by Manor Heat and Air combines an energy-efficient condenser, a reliable heating component, and a high-performance evaporator coil to provide consistent heating and cooling for small to medium-sized homes in Manor, TX. Engineered for durability and comfort, it ensures year-round indoor climate control. What's Included: Goodman GLXT7CA6010 Condenser: Goodman GLXT7C two-stage, high-efficiency air conditioner featuring a Copeland Ultra-Tech scroll compressor, ComfortBridge technology, and a quiet ECM fan motor. Goodman GRVT801005CN Furnace: Goodman GRVT80 two-stage gas furnace rated up to 80% AFUE with a variable-speed ECM blower and a two-stage gas valve for consistent, energy-efficient heating. Goodman CAPTA6030C3 Evaporator Coil: Goodman CHPTA/CAPTA cased upflow/downflow/horizontal evaporator coil with internal TXV, all-aluminum construction, and an insulated, compact cabinet for space-limited installations. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, your technician will note it on your estimate before work begins. SPECIFICATIONS Bundle Size/Tonnage 5 Ton Bundle Cooling Efficiency (SEER2) 16.2 SEER2 Condenser Model GLXT7CA6010 Condenser Stages Single Furnace Model GRVT801005CN Furnace Stage/Blower Two Furnace Efficiency 80% Furnace Capacity (BTU) 100K Furnace Cabinet Size C Heat Source Gas Coil Model CAPTA6030C3 Coil Cabinet Size C AHRI 216614423 Refrigerant R-32 Warranty 10-Year Parts (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY SPEC SHEET SPEC SHEET SPEC SHEET

Read more less

The Goodman HVAC system offered by Manor Heat and Air combines an energy-efficient condenser, a reliable heating component, and a high-performance evaporator coil to provide consistent heating and cooling for small to medium-sized homes in Manor, TX. Engineered for durability and comfort, it ensures year-round indoor climate control. What's Included: Goodman GLXT7CA2410 Condenser: Goodman GLXT7C two-stage, high-efficiency air conditioner featuring a Copeland Ultra-Tech scroll compressor, ComfortBridge technology, and a quiet ECM fan motor. Goodman GRVT800603BN Furnace: Goodman GRVT80 two-stage gas furnace rated up to 80% AFUE with a variable-speed ECM blower and a two-stage gas valve for consistent, energy-efficient heating. Goodman CAPTA2422B3 Evaporator Coil: Goodman CHPTA/CAPTA cased upflow/downflow/horizontal evaporator coil with internal TXV, all-aluminum construction, and an insulated, compact cabinet for space-limited installations. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, your technician will note it on your estimate before work begins. SPECIFICATIONS Bundle Size/Tonnage 2 Ton Bundle Cooling Efficiency (SEER2) 18 SEER2 Condenser Model GLXT7CA2410 Condenser Stages Single Furnace Model GRVT800603BN Furnace Stage/Blower Two Furnace Efficiency 80% Furnace Capacity (BTU) 60K Furnace Cabinet Size B Heat Source Gas Coil Model CAPTA2422B3 Coil Cabinet Size B AHRI 216613799 Refrigerant R-32 Warranty 10-Year Parts (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY SPEC SHEET SPEC SHEET SPEC SHEET

Read more less

The Goodman HVAC system offered by Manor Heat and Air combines an energy-efficient condenser, a reliable heating component, and a high-performance evaporator coil to provide consistent heating and cooling for small to medium-sized homes in Manor, TX. Engineered for durability and comfort, it ensures year-round indoor climate control. What's Included: Goodman GLXS4BA6010 Condenser: Goodman GLXS4B single-stage air conditioner rated up to 15.2 SEER2, with an energy-efficient compressor, copper tube/enhanced aluminum-fin coil, and factory-installed filter drier. Goodman GR9S961205DN Furnace: Goodman GR9S96 single-stage, multi-speed ECM gas furnace rated up to 96% AFUE, with a heavy-duty aluminized-steel tubular primary heat exchanger, stainless-steel secondary heat exchanger, and silicon-nitride igniter. Goodman CAPTA6030D3 Evaporator Coil: Goodman CHPTA/CAPTA cased upflow/downflow/horizontal evaporator coil with internal TXV, all-aluminum construction, and an insulated, compact cabinet for space-limited installations. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, your technician will note it on your estimate before work begins. SPECIFICATIONS Bundle Size/Tonnage 5 Ton Bundle Cooling Efficiency (SEER2) 14 SEER2 Condenser Model GLXS4BA6010 Condenser Stages Single Furnace Model GR9S961205DN Furnace Stage/Blower Single Furnace Efficiency 96% Furnace Capacity (BTU) 120k Furnace Cabinet Size D Heat Source Gas Coil Model CAPTA6030D3 Coil Cabinet Size D AHRI 214860173 Refrigerant R-32 Warranty 10-Year Parts (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY SPEC SHEET SPEC SHEET SPEC SHEET

Read more less

The Goodman HVAC system offered by Manor Heat and Air combines an energy-efficient condenser, a reliable heating component, and a high-performance evaporator coil to provide consistent heating and cooling for small to medium-sized homes in Manor, TX. Engineered for durability and comfort, it ensures year-round indoor climate control. What's Included: Goodman GLXT7CA2410 Condenser: Goodman GLXT7C two-stage, high-efficiency air conditioner featuring a Copeland Ultra-Tech scroll compressor, ComfortBridge technology, and a quiet ECM fan motor. Goodman GRVT800603BN Furnace: Goodman GRVT80 two-stage gas furnace rated up to 80% AFUE with a variable-speed ECM blower and a two-stage gas valve for consistent, energy-efficient heating. Goodman CHPTA2426B3 Evaporator Coil: Goodman CHPTA/CAPTA cased upflow/downflow/horizontal evaporator coil with internal TXV, all-aluminum construction, and an insulated, compact cabinet for space-limited installations. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, your technician will note it on your estimate before work begins. SPECIFICATIONS Bundle Size/Tonnage 2 Ton Bundle Cooling Efficiency (SEER2) 18 SEER2 Condenser Model GLXT7CA2410 Condenser Stages Single Furnace Model GRVT800603BN Furnace Stage/Blower Two Furnace Efficiency 80% Furnace Capacity (BTU) 60K Furnace Cabinet Size B Heat Source Gas Coil Model CHPTA2426B3 Coil Cabinet Size B AHRI 216613808 Refrigerant R-32 Warranty 10-Year Parts (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY SPEC SHEET SPEC SHEET SPEC SHEET

Read more less

The Goodman HVAC system offered by Manor Heat and Air combines an energy-efficient condenser, a reliable heating component, and a high-performance evaporator coil to provide consistent heating and cooling for small to medium-sized homes in Manor, TX. Engineered for durability and comfort, it ensures year-round indoor climate control. What's Included: Goodman GLXS4BA4810 Condenser: Goodman GLXS4B single-stage air conditioner rated up to 15.2 SEER2, with an energy-efficient compressor, copper tube/enhanced aluminum-fin coil, and factory-installed filter drier. Goodman GR9S960804CN Furnace: Goodman GR9S96 single-stage, multi-speed ECM gas furnace rated up to 96% AFUE, with a heavy-duty aluminized-steel tubular primary heat exchanger, stainless-steel secondary heat exchanger, and silicon-nitride igniter. Goodman CAPTA6030C3 Evaporator Coil: Goodman CHPTA/CAPTA cased upflow/downflow/horizontal evaporator coil with internal TXV, all-aluminum construction, and an insulated, compact cabinet for space-limited installations. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, your technician will note it on your estimate before work begins. SPECIFICATIONS Bundle Size/Tonnage 4 Ton Bundle Cooling Efficiency (SEER2) 14.3 SEER2 Condenser Model GLXS4BA4810 Condenser Stages Single Furnace Model GR9S960804CN Furnace Stage/Blower Single Furnace Efficiency 96% Furnace Capacity (BTU) 80K Furnace Cabinet Size C Heat Source Gas Coil Model CAPTA6030C3 Coil Cabinet Size C AHRI 214860103 Refrigerant R-32 Warranty 10-Year Parts (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY SPEC SHEET SPEC SHEET SPEC SHEET

Read more less

The Goodman HVAC system offered by Manor Heat and Air combines an energy-efficient condenser, a reliable heating component, and a high-performance evaporator coil to provide consistent heating and cooling for small to medium-sized homes in Manor, TX. Engineered for durability and comfort, it ensures year-round indoor climate control. What's Included: Goodman GLXS4BA4810 Condenser: Goodman GLXS4B single-stage air conditioner rated up to 15.2 SEER2, with an energy-efficient compressor, copper tube/enhanced aluminum-fin coil, and factory-installed filter drier. Goodman GR9S800804CN Furnace: Goodman GR9S80 single-stage, multi-speed ECM, multi-position gas furnace at 80% AFUE, with a heavy-duty aluminized-steel dual-diameter tubular heat exchanger, hot-surface igniter, and self-diagnostic control board. Goodman CHPTA4830C3 Evaporator Coil: Goodman CHPTA/CAPTA cased upflow/downflow/horizontal evaporator coil with internal TXV, all-aluminum construction, and an insulated, compact cabinet for space-limited installations. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, your technician will note it on your estimate before work begins. SPECIFICATIONS Bundle Size/Tonnage 4 Ton Bundle Cooling Efficiency (SEER2) 14.5 SEER2 Condenser Model GLXS4BA4810 Condenser Stages Single Furnace Model GR9S800804CN Furnace Stage/Blower Single Furnace Efficiency 80% Furnace Capacity (BTU) 80K Furnace Cabinet Size C Heat Source Gas Coil Model CHPTA4830C3 Coil Cabinet Size C AHRI 214860130 Refrigerant R-32 Warranty 10-Year Parts (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY SPEC SHEET SPEC SHEET SPEC SHEET

Read more less

The Goodman HVAC system offered by Manor Heat and Air combines an energy-efficient condenser, a reliable heating component, and a high-performance evaporator coil to provide consistent heating and cooling for small to medium-sized homes in Manor, TX. Engineered for durability and comfort, it ensures year-round indoor climate control. What's Included: Goodman GLXS4BA6010 Condenser: Goodman GLXS4B single-stage air conditioner rated up to 15.2 SEER2, with an energy-efficient compressor, copper tube/enhanced aluminum-fin coil, and factory-installed filter drier. Goodman GR9S961205DN Furnace: Goodman GR9S96 single-stage, multi-speed ECM gas furnace rated up to 96% AFUE, with a heavy-duty aluminized-steel tubular primary heat exchanger, stainless-steel secondary heat exchanger, and silicon-nitride igniter. Goodman CHPTA6030D3 Evaporator Coil: Goodman CHPTA/CAPTA cased upflow/downflow/horizontal evaporator coil with internal TXV, all-aluminum construction, and an insulated, compact cabinet for space-limited installations. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, your technician will note it on your estimate before work begins. SPECIFICATIONS Bundle Size/Tonnage 5 Ton Bundle Cooling Efficiency (SEER2) 14 SEER2 Condenser Model GLXS4BA6010 Condenser Stages Single Furnace Model GR9S961205DN Furnace Stage/Blower Single Furnace Efficiency 96% Furnace Capacity (BTU) 120k Furnace Cabinet Size D Heat Source Gas Coil Model CHPTA6030D3 Coil Cabinet Size D AHRI 214860172 Refrigerant R-32 Warranty 10-Year Parts (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY SPEC SHEET SPEC SHEET SPEC SHEET

Read more less

The Goodman HVAC system offered by Manor Heat and Air combines an energy-efficient condenser, a reliable heating component, and a high-performance evaporator coil to provide consistent heating and cooling for small to medium-sized homes in Manor, TX. Engineered for durability and comfort, it ensures year-round indoor climate control. What's Included: Goodman GLXS4BA6010 Condenser: Goodman GLXS4B single-stage air conditioner rated up to 15.2 SEER2, with an energy-efficient compressor, copper tube/enhanced aluminum-fin coil, and factory-installed filter drier. Goodman GR9S800805CN Furnace: Goodman GR9S80 single-stage, multi-speed ECM, multi-position gas furnace at 80% AFUE, with a heavy-duty aluminized-steel dual-diameter tubular heat exchanger, hot-surface igniter, and self-diagnostic control board. Goodman CHPTA6030D3 Evaporator Coil: Goodman CHPTA/CAPTA cased upflow/downflow/horizontal evaporator coil with internal TXV, all-aluminum construction, and an insulated, compact cabinet for space-limited installations. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, your technician will note it on your estimate before work begins. SPECIFICATIONS Bundle Size/Tonnage 5 Ton Bundle Cooling Efficiency (SEER2) 13.8 SEER2 Condenser Model GLXS4BA6010 Condenser Stages Single Furnace Model GR9S800805CN Furnace Stage/Blower Single Furnace Efficiency 80% Furnace Capacity (BTU) 80K Furnace Cabinet Size C Heat Source Gas Coil Model CHPTA6030D3 Coil Cabinet Size D AHRI 214860184 Refrigerant R-32 Warranty 10-Year Parts (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY SPEC SHEET SPEC SHEET SPEC SHEET

Read more less

The Goodman HVAC system offered by Manor Heat and Air combines an energy-efficient condenser, a reliable heating component, and a high-performance evaporator coil to provide consistent heating and cooling for small to medium-sized homes in Manor, TX. Engineered for durability and comfort, it ensures year-round indoor climate control. What's Included: Goodman GLXS4BA4810 Condenser: Goodman GLXS4B single-stage air conditioner rated up to 15.2 SEER2, with an energy-efficient compressor, copper tube/enhanced aluminum-fin coil, and factory-installed filter drier. Goodman GR9S960804CN Furnace: Goodman GR9S96 single-stage, multi-speed ECM gas furnace rated up to 96% AFUE, with a heavy-duty aluminized-steel tubular primary heat exchanger, stainless-steel secondary heat exchanger, and silicon-nitride igniter. Goodman CHPTA4830C3 Evaporator Coil: Goodman CHPTA/CAPTA cased upflow/downflow/horizontal evaporator coil with internal TXV, all-aluminum construction, and an insulated, compact cabinet for space-limited installations. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, your technician will note it on your estimate before work begins. SPECIFICATIONS Bundle Size/Tonnage 4 Ton Bundle Cooling Efficiency (SEER2) 14 SEER2 Condenser Model GLXS4BA4810 Condenser Stages Single Furnace Model GR9S960804CN Furnace Stage/Blower Single Furnace Efficiency 96% Furnace Capacity (BTU) 80K Furnace Cabinet Size C Heat Source Gas Coil Model CHPTA4830C3 Coil Cabinet Size C AHRI 214860102 Refrigerant R-32 Warranty 10-Year Parts (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY SPEC SHEET SPEC SHEET SPEC SHEET

Read more less

The Goodman HVAC system offered by Manor Heat and Air combines an energy-efficient condenser, a reliable heating component, and a high-performance evaporator coil to provide consistent heating and cooling for small to medium-sized homes in Manor, TX. Engineered for durability and comfort, it ensures year-round indoor climate control. What's Included: Goodman GLXS4BA6010 Condenser: Goodman GLXS4B single-stage air conditioner rated up to 15.2 SEER2, with an energy-efficient compressor, copper tube/enhanced aluminum-fin coil, and factory-installed filter drier. Goodman GR9S800805CN Furnace: Goodman GR9S80 single-stage, multi-speed ECM, multi-position gas furnace at 80% AFUE, with a heavy-duty aluminized-steel dual-diameter tubular heat exchanger, hot-surface igniter, and self-diagnostic control board. Goodman CAPTA6030C3 Evaporator Coil: Goodman CHPTA/CAPTA cased upflow/downflow/horizontal evaporator coil with internal TXV, all-aluminum construction, and an insulated, compact cabinet for space-limited installations. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, your technician will note it on your estimate before work begins. SPECIFICATIONS Bundle Size/Tonnage 5 Ton Bundle Cooling Efficiency (SEER2) 14 SEER2 Condenser Model GLXS4BA6010 Condenser Stages Single Furnace Model GR9S800805CN Furnace Stage/Blower Single Furnace Efficiency 80% Furnace Capacity (BTU) 80K Furnace Cabinet Size C Heat Source Gas Coil Model CAPTA6030C3 Coil Cabinet Size C AHRI 214860185 Refrigerant R-32 Warranty 10-Year Parts (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY SPEC SHEET SPEC SHEET SPEC SHEET

Read more less

The Goodman HVAC system offered by Manor Heat and Air combines an energy-efficient condenser, a reliable heating component, and a high-performance evaporator coil to provide consistent heating and cooling for small to medium-sized homes in Manor, TX. Engineered for durability and comfort, it ensures year-round indoor climate control. What's Included: Goodman GLXS4BA4210 Condenser: Goodman GLXS4B single-stage air conditioner rated up to 15.2 SEER2, with an energy-efficient compressor, copper tube/enhanced aluminum-fin coil, and factory-installed filter drier. Goodman GR9S960804CN Furnace: Goodman GR9S96 single-stage, multi-speed ECM gas furnace rated up to 96% AFUE, with a heavy-duty aluminized-steel tubular primary heat exchanger, stainless-steel secondary heat exchanger, and silicon-nitride igniter. Goodman CHPTA4230C3 Evaporator Coil: Goodman CHPTA/CAPTA cased upflow/downflow/horizontal evaporator coil with internal TXV, all-aluminum construction, and an insulated, compact cabinet for space-limited installations. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, your technician will note it on your estimate before work begins. SPECIFICATIONS Bundle Size/Tonnage 3.5 Ton Bundle Cooling Efficiency (SEER2) 14.5 SEER2 Condenser Model GLXS4BA4210 Condenser Stages Single Furnace Model GR9S960804CN Furnace Stage/Blower Single Furnace Efficiency 96% Furnace Capacity (BTU) 80K Furnace Cabinet Size C Heat Source Gas Coil Model CHPTA4230C3 Coil Cabinet Size C AHRI 214859967 Refrigerant R-32 Warranty 10-Year Parts (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY SPEC SHEET SPEC SHEET SPEC SHEET

Read more less

The Goodman HVAC system offered by Manor Heat and Air combines an energy-efficient condenser, a reliable heating component, and a high-performance evaporator coil to provide consistent heating and cooling for small to medium-sized homes in Manor, TX. Engineered for durability and comfort, it ensures year-round indoor climate control. What's Included: Goodman GLXS4BA4210 Condenser: Goodman GLXS4B single-stage air conditioner rated up to 15.2 SEER2, with an energy-efficient compressor, copper tube/enhanced aluminum-fin coil, and factory-installed filter drier. Goodman GR9S960804CN Furnace: Goodman GR9S96 single-stage, multi-speed ECM gas furnace rated up to 96% AFUE, with a heavy-duty aluminized-steel tubular primary heat exchanger, stainless-steel secondary heat exchanger, and silicon-nitride igniter. Goodman CAPTA4230C3 Evaporator Coil: Goodman CHPTA/CAPTA cased upflow/downflow/horizontal evaporator coil with internal TXV, all-aluminum construction, and an insulated, compact cabinet for space-limited installations. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, your technician will note it on your estimate before work begins. SPECIFICATIONS Bundle Size/Tonnage 3.5 Ton Bundle Cooling Efficiency (SEER2) 15.2 SEER2 Condenser Model GLXS4BA4210 Condenser Stages Single Furnace Model GR9S960804CN Furnace Stage/Blower Single Furnace Efficiency 96% Furnace Capacity (BTU) 80K Furnace Cabinet Size C Heat Source Gas Coil Model CAPTA4230C3 Coil Cabinet Size C AHRI 214859969 Refrigerant R-32 Warranty 10-Year Parts (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY SPEC SHEET SPEC SHEET SPEC SHEET

Read more less

The Goodman HVAC system offered by Manor Heat and Air combines an energy-efficient condenser, a reliable heating component, and a high-performance evaporator coil to provide consistent heating and cooling for small to medium-sized homes in Manor, TX. Engineered for durability and comfort, it ensures year-round indoor climate control. What's Included: Goodman GLXS4BA4810 Condenser: Goodman GLXS4B single-stage air conditioner rated up to 15.2 SEER2, with an energy-efficient compressor, copper tube/enhanced aluminum-fin coil, and factory-installed filter drier. Goodman GR9S800804CN Furnace: Goodman GR9S80 single-stage, multi-speed ECM, multi-position gas furnace at 80% AFUE, with a heavy-duty aluminized-steel dual-diameter tubular heat exchanger, hot-surface igniter, and self-diagnostic control board. Goodman CAPTA6030C3 Evaporator Coil: Goodman CHPTA/CAPTA cased upflow/downflow/horizontal evaporator coil with internal TXV, all-aluminum construction, and an insulated, compact cabinet for space-limited installations. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, your technician will note it on your estimate before work begins. SPECIFICATIONS Bundle Size/Tonnage 4 Ton Bundle Cooling Efficiency (SEER2) 14.5 SEER2 Condenser Model GLXS4BA4810 Condenser Stages Single Furnace Model GR9S800804CN Furnace Stage/Blower Single Furnace Efficiency 80% Furnace Capacity (BTU) 80K Furnace Cabinet Size C Heat Source Gas Coil Model CAPTA6030C3 Coil Cabinet Size C AHRI 214860131 Refrigerant R-32 Warranty 10-Year Parts (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY SPEC SHEET SPEC SHEET SPEC SHEET

Read more less

The Goodman HVAC system offered by Manor Heat and Air combines an energy-efficient condenser, a reliable heating component, and a high-performance evaporator coil to provide consistent heating and cooling for small to medium-sized homes in Manor, TX. Engineered for durability and comfort, it ensures year-round indoor climate control. What's Included: Goodman GLXS4BA4210 Condenser: Goodman GLXS4B single-stage air conditioner rated up to 15.2 SEER2, with an energy-efficient compressor, copper tube/enhanced aluminum-fin coil, and factory-installed filter drier. Goodman GR9S800804CN Furnace: Goodman GR9S80 single-stage, multi-speed ECM, multi-position gas furnace at 80% AFUE, with a heavy-duty aluminized-steel dual-diameter tubular heat exchanger, hot-surface igniter, and self-diagnostic control board. Goodman CHPTA4230C3 Evaporator Coil: Goodman CHPTA/CAPTA cased upflow/downflow/horizontal evaporator coil with internal TXV, all-aluminum construction, and an insulated, compact cabinet for space-limited installations. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, your technician will note it on your estimate before work begins. SPECIFICATIONS Bundle Size/Tonnage 3.5 Ton Bundle Cooling Efficiency (SEER2) 14.5 SEER2 Condenser Model GLXS4BA4210 Condenser Stages Single Furnace Model GR9S800804CN Furnace Stage/Blower Single Furnace Efficiency 80% Furnace Capacity (BTU) 80K Furnace Cabinet Size C Heat Source Gas Coil Model CHPTA4230C3 Coil Cabinet Size C AHRI 214860001 Refrigerant R-32 Warranty 10-Year Parts (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY SPEC SHEET SPEC SHEET SPEC SHEET

Read more less

The Goodman HVAC system offered by Manor Heat and Air combines an energy-efficient condenser, a reliable heating component, and a high-performance evaporator coil to provide consistent heating and cooling for small to medium-sized homes in Manor, TX. Engineered for durability and comfort, it ensures year-round indoor climate control. What's Included: Goodman GLXS4BA4210 Condenser: Goodman GLXS4B single-stage air conditioner rated up to 15.2 SEER2, with an energy-efficient compressor, copper tube/enhanced aluminum-fin coil, and factory-installed filter drier. Goodman GR9S800804CN Furnace: Goodman GR9S80 single-stage, multi-speed ECM, multi-position gas furnace at 80% AFUE, with a heavy-duty aluminized-steel dual-diameter tubular heat exchanger, hot-surface igniter, and self-diagnostic control board. Goodman CAPTA4230C3 Evaporator Coil: Goodman CHPTA/CAPTA cased upflow/downflow/horizontal evaporator coil with internal TXV, all-aluminum construction, and an insulated, compact cabinet for space-limited installations. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, your technician will note it on your estimate before work begins. SPECIFICATIONS Bundle Size/Tonnage 3.5 Ton Bundle Cooling Efficiency (SEER2) 15.2 SEER2 Condenser Model GLXS4BA4210 Condenser Stages Single Furnace Model GR9S800804CN Furnace Stage/Blower Single Furnace Efficiency 80% Furnace Capacity (BTU) 80K Furnace Cabinet Size C Heat Source Gas Coil Model CAPTA4230C3 Coil Cabinet Size C AHRI 214860003 Refrigerant R-32 Warranty 10-Year Parts (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY SPEC SHEET SPEC SHEET SPEC SHEET

Read more less