The Goodman HVAC system offered by Manor Heat and Air combines an energy-efficient condenser, a reliable heating component, and a high-performance evaporator coil to provide consistent heating and cooling for small to medium-sized homes in Manor, TX. Engineered for durability and comfort, it ensures year-round indoor climate control. What's Included: Goodman GLXS4BA1810 Condenser: Goodman GLXS4B single-stage air conditioner rated up to 15.2 SEER2, with an energy-efficient compressor, copper tube/enhanced aluminum-fin coil, and factory-installed filter drier. Goodman GR9S800403AN Furnace: Goodman GR9S80 single-stage, multi-speed ECM, multi-position gas furnace at 80% AFUE, with a heavy-duty aluminized-steel dual-diameter tubular heat exchanger, hot-surface igniter, and self-diagnostic control board. Goodman CAPTA1818A3 Evaporator Coil: Goodman CHPTA/CAPTA cased upflow/downflow/horizontal evaporator coil with internal TXV, all-aluminum construction, and an insulated, compact cabinet for space-limited installations. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, your technician will note it on your estimate before work begins. SPECIFICATIONS Bundle Size/Tonnage 1.5 Ton Bundle Cooling Efficiency (SEER2) 14.5 SEER2 Condenser Model GLXS4BA1810 Condenser Stages Single Furnace Model GR9S800403AN Furnace Stage/Blower Single Furnace Efficiency 80% Furnace Capacity (BTU) 60K Furnace Cabinet Size A Heat Source Gas Coil Model CAPTA1818A3 Coil Cabinet Size A AHRI 215214549 Refrigerant R-32 Warranty 10-Year Parts (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY SPEC SHEET SPEC SHEET SPEC SHEET

Read more less

The Goodman HVAC system offered by Manor Heat and Air combines an energy-efficient condenser, a reliable heating component, and a high-performance evaporator coil to provide consistent heating and cooling for small to medium-sized homes in Manor, TX. Engineered for durability and comfort, it ensures year-round indoor climate control. What's Included: Goodman GLZS4BA1810 Heat Pump Condenser: Goodman GLZS4B single-stage heat pump delivering up to 15.2 SEER2 and 7.8 HSPF2, with an energy-efficient compressor, SmartShift technology for quiet, reliable defrost, and enhanced aluminum-fin coils. Goodman AMST24BU1300 Air Handler: Goodman AMST energy-efficient, multi-position, multi-speed ECM air handler with a factory-installed TXV, all-aluminum evaporator coil, optimized for pairing with single-stage AC or heat-pump condensers. Goodman HKTSD08X1 Heat Kit: Goodman HKTSD electric heat kit accessory for AMST-series air handlers, factory-assembled and tested with plug-in wiring harness, sequencer staging, and a fuse-link high-temperature limit control. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Heat Pump Kit (Condenser + Air Handler & Heat Kit) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Electric heat kit factory-matched heat strip, field-installed and wired to OEM spec Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, your technician will note it on your estimate before work begins. SPECIFICATIONS Bundle Size/Tonnage 1.5 Ton Bundle Cooling Efficiency (SEER2) 14.3 SEER2 Condenser Model GLZS4BA1810 Condenser Stages Single Stage Air Handler Model AMST24BU1300 Air Handler Blower Constant Heat Kit Model HKTSD08X1 Heat Source Heat Pump w/ Electric Backup AHRI 215213817 Refrigerant R-32 Warranty 10-Year Parts, 10-Year Compressor (When Registered with OEM) RESOURCES Condenser Air Handler LIMITED WARRANTY LIMITED WARRANTY SPEC SHEET SPEC SHEET

Read more less

The Goodman HVAC system offered by Manor Heat and Air combines an energy-efficient condenser, a reliable heating component, and a high-performance evaporator coil to provide consistent heating and cooling for small to medium-sized homes in Manor, TX. Engineered for durability and comfort, it ensures year-round indoor climate control. What's Included: Goodman GLZS4BA2410 Heat Pump Condenser: Goodman GLZS4B single-stage heat pump delivering up to 15.2 SEER2 and 7.8 HSPF2, with an energy-efficient compressor, SmartShift technology for quiet, reliable defrost, and enhanced aluminum-fin coils. Goodman AMST24BU1300 Air Handler: Goodman AMST energy-efficient, multi-position, multi-speed ECM air handler with a factory-installed TXV, all-aluminum evaporator coil, optimized for pairing with single-stage AC or heat-pump condensers. Goodman HKTSD08X1 Heat Kit: Goodman HKTSD electric heat kit accessory for AMST-series air handlers, factory-assembled and tested with plug-in wiring harness, sequencer staging, and a fuse-link high-temperature limit control. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Heat Pump Kit (Condenser + Air Handler & Heat Kit) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Electric heat kit factory-matched heat strip, field-installed and wired to OEM spec Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, your technician will note it on your estimate before work begins. SPECIFICATIONS Bundle Size/Tonnage 2 Ton Bundle Cooling Efficiency (SEER2) 14.3 SEER2 Condenser Model GLZS4BA2410 Condenser Stages Single Stage Air Handler Model AMST24BU1300 Air Handler Blower Constant Heat Kit Model HKTSD08X1 Heat Source Heat Pump w/ Electric Backup AHRI 215213871 Refrigerant R-32 Warranty 10-Year Parts, 10-Year Compressor (When Registered with OEM) RESOURCES Condenser Air Handler LIMITED WARRANTY LIMITED WARRANTY SPEC SHEET SPEC SHEET

Read more less

Lennox is a trusted leader in home comfort, offering high-performance HVAC systems that combine efficiency, reliability, and innovation. Designed for energy savings and durability, Lennox products meet top residential heating and cooling standards. Whether upgrading or installing new, Lennox provides advanced solutions to keep your home comfortable year-round. What's Included: ML14KP1 Heat Pump Condenser: A high-efficiency unit with durable construction and advanced technology for quiet operation and reliable comfort in any climate. CBK45UHPT Air Handler: Designed for superior airflow and compatibility with the ML14KP1 condenser, featuring a corrosion-resistant aluminum coil for lasting operation and efficiency. ECB45 Heat Kit: Provides supplemental electric heating to ensure indoor comfort during colder months, enhancing system versatility and effectiveness. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Heat Pump System Kit(Condenser & Coil + Air Handler) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line (outdoor) filter drier, locking caps, ArmaFlex insulation Refrigerant line (indoor) bi-flow filter drier, ArmaFlex insulation Drainage & safety secondary drain pan, float switch, P-trap PVC fittings couplings, elbows, adapters for condensate line Not Included This listing covers the equipment and standard deployment scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, installation, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any supplementary work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 1.5-Ton Bundle Cooling Efficiency (SEER2) 14.3 Condenser Model ML14KP1-018 Condenser Stages Single Air Handler Model CBK45UHPT-018 Air Handler Stages Single - 3-Speed Motor Air Handler Capacity 018K Air Handler Cabinet Size B Heat Source Electric Heat Kit Model ECB45-10CB AHRI Number 215685480 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM)

Read more less

The Goodman HVAC system offered by Manor Heat and Air combines an energy-efficient condenser, a reliable heating component, and a high-performance evaporator coil to provide consistent heating and cooling for small to medium-sized homes in Manor, TX. Engineered for durability and comfort, it ensures year-round indoor climate control. What's Included: Goodman GLXS4BA2410 Condenser: Goodman GLXS4B single-stage air conditioner rated up to 15.2 SEER2, with an energy-efficient compressor, copper tube/enhanced aluminum-fin coil, and factory-installed filter drier. Goodman GR9S800603BN Furnace: Goodman GR9S80 single-stage, multi-speed ECM, multi-position gas furnace at 80% AFUE, with a heavy-duty aluminized-steel dual-diameter tubular heat exchanger, hot-surface igniter, and self-diagnostic control board. Goodman CHPTA2426B3 Evaporator Coil: Goodman CHPTA/CAPTA cased upflow/downflow/horizontal evaporator coil with internal TXV, all-aluminum construction, and an insulated, compact cabinet for space-limited installations. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, your technician will note it on your estimate before work begins. SPECIFICATIONS Bundle Size/Tonnage 2 Ton Bundle Cooling Efficiency (SEER2) 14.5 SEER2 Condenser Model GLXS4BA2410 Condenser Stages Single Furnace Model GR9S800603BN Furnace Stage/Blower Single Furnace Efficiency 80% Furnace Capacity (BTU) 60K Furnace Cabinet Size B Heat Source Gas Coil Model CHPTA2426B3 Coil Cabinet Size B AHRI 215214695 Refrigerant R-32 Warranty 10-Year Parts (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY SPEC SHEET SPEC SHEET SPEC SHEET

Read more less

The Goodman HVAC system offered by Manor Heat and Air combines an energy-efficient condenser, a reliable heating component, and a high-performance evaporator coil to provide consistent heating and cooling for small to medium-sized homes in Manor, TX. Engineered for durability and comfort, it ensures year-round indoor climate control. What's Included: Goodman GLXS4BA3010 Condenser: Goodman GLXS4B single-stage air conditioner rated up to 15.2 SEER2, with an energy-efficient compressor, copper tube/enhanced aluminum-fin coil, and factory-installed filter drier. Goodman GR9S800603AN Furnace: Goodman GR9S80 single-stage, multi-speed ECM, multi-position gas furnace at 80% AFUE, with a heavy-duty aluminized-steel dual-diameter tubular heat exchanger, hot-surface igniter, and self-diagnostic control board. Goodman CHPTA3026B3 Evaporator Coil: Goodman CHPTA/CAPTA cased upflow/downflow/horizontal evaporator coil with internal TXV, all-aluminum construction, and an insulated, compact cabinet for space-limited installations. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, your technician will note it on your estimate before work begins. SPECIFICATIONS Bundle Size/Tonnage 2.5 Ton Bundle Cooling Efficiency (SEER2) 14.3 SEER2 Condenser Model GLXS4BA3010 Condenser Stages Single Furnace Model GR9S800603AN Furnace Stage/Blower Single Furnace Efficiency 80% Furnace Capacity (BTU) 60K Furnace Cabinet Size B Heat Source Gas Coil Model CHPTA3026B3 Coil Cabinet Size B AHRI 215214842 Refrigerant R-32 Warranty 10-Year Parts (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY SPEC SHEET SPEC SHEET SPEC SHEET

Read more less

Lennox is a trusted leader in home comfort, delivering high-performance HVAC systems that combine efficiency, reliability, and innovation. Focused on energy savings and durability, Lennox products meet top standards in residential heating and cooling. Whether upgrading or installing new, Lennox offers advanced solutions to keep your property comfortable year-round. What's Included: MLKC1 Condenser: The Lennox MLKC1 is a single-stage air conditioner condenser designed for reliable, energy-efficient cooling. Built with a durable cabinet and optimized for 14.3 SEER2 systems, it suits standard residential use. ML180UHE Furnace: The Lennox ML180UHE is an 80% AFUE single-stage gas furnace with a constant torque ECM blower motor, providing reliable performance, improved airflow, and fuel-conscious operation for standard-efficiency applications. CK40CT Evaporator Coil: The Lennox CK40CT is an all-aluminum cased coil for upflow/downflow installations. Durable and corrosion-resistant, it pairs with Lennox air conditioners and heat pumps for long-lasting performance. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included components Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas system Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included This listing covers the equipment and standard deployment scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the basic disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 1.5-Ton Bundle Cooling Efficiency (SEER2) 14.3 Condenser Model ML14KC1-018 Condenser Stages Single Furnace Model ML180UH045E36A Furnace Stages Single Furnace Efficiency 80% Furnace Capacity (BTU) 44K Furnace Cabinet Size A Heat Source Gas Coil Model CK40CT-24A Coil Cabinet Size A AHRI 215578594 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT BROCHURE

Read more less

Lennox is a trusted leader in home well-being, offering superior HVAC systems that combine efficiency, reliability, and innovation. Designed for energy savings and durability, Lennox products meet top residential heating and cooling standards. Whether upgrading or installing new, Lennox provides advanced solutions to keep your home comfortable year-round. What's Included: ML14KP1 Heat Pump Condenser: A high-efficiency unit with durable construction and advanced technology for quiet operation and dependable comfort in any climate. CBK45UHPT Air Handler: Designed for superior airflow and compatibility with the ML14KP1 condenser, featuring a corrosion-resistant aluminum coil for lasting efficiency and efficiency. ECB45 Heat Kit: Provides supplemental electric heating to ensure indoor ease during colder months, enhancing system versatility and effectiveness. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Heat Pump System Kit(Condenser & Coil + Air Handler) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line (outdoor) filter drier, locking caps, ArmaFlex insulation Refrigerant line (indoor) bi-flow filter drier, ArmaFlex insulation Drainage & safety secondary drain pan, float switch, P-trap PVC fittings couplings, elbows, adapters for condensate line Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 2-Ton Bundle Cooling Efficiency (SEER2) 14.3 Condenser Model ML14KP1-024 Condenser Stages Single Air Handler Model CBK45UHPT-024 Air Handler Stages Single - 3-Speed Motor Air Handler Capacity 024K Air Handler Cabinet Size B Heat Source Electric Heat Kit Model ECB45-10CB AHRI Number 215710129 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM)

Read more less

The Goodman HVAC system offered by Manor Heat and Air combines an energy-efficient condenser, a reliable heating component, and a high-performance evaporator coil to provide consistent heating and cooling for small to medium-sized homes in Manor, TX. Engineered for durability and comfort, it ensures year-round indoor climate control. What's Included: Goodman GLZS4BA3010 Heat Pump Condenser: Goodman GLZS4B single-stage heat pump delivering up to 15.2 SEER2 and 7.8 HSPF2, with an energy-efficient compressor, SmartShift technology for quiet, reliable defrost, and enhanced aluminum-fin coils. Goodman AMST30BU1300 Air Handler: Goodman AMST energy-efficient, multi-position, multi-speed ECM air handler with a factory-installed TXV, all-aluminum evaporator coil, optimized for pairing with single-stage AC or heat-pump condensers. Goodman HKTSD10X1 Heat Kit: Goodman HKTSD electric heat kit accessory for AMST-series air handlers, factory-assembled and tested with plug-in wiring harness, sequencer staging, and a fuse-link high-temperature limit control. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Heat Pump Kit (Condenser + Air Handler & Heat Kit) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Electric heat kit factory-matched heat strip, field-installed and wired to OEM spec Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, your technician will note it on your estimate before work begins. SPECIFICATIONS Bundle Size/Tonnage 2.5 Ton Bundle Cooling Efficiency (SEER2) 14.3 SEER2 Condenser Model GLZS4BA3010 Condenser Stages Single Stage Air Handler Model AMST30BU1300 Air Handler Blower Constant Heat Kit Model HKTSD10X1 Heat Source Heat Pump w/ Electric Backup AHRI 215213872 Refrigerant R-32 Warranty 10-Year Parts, 10-Year Compressor (When Registered with OEM) RESOURCES Condenser Air Handler LIMITED WARRANTY LIMITED WARRANTY SPEC SHEET SPEC SHEET

Read more less

Lennox is a trusted leader in home comfort, offering high-performance HVAC systems that combine efficiency, reliability, and innovation. Dedicated on energy savings and durability, Lennox products meet top standards in residential heating and cooling. Whether upgrading or installing new, Lennox provides advanced solutions to keep your home comfortable year-round. What's Included: MLKC1 Condenser: The Lennox MLKC1 is a single-stage air conditioner condenser designed for reliable, energy-efficient cooling. It features a resilient cabinet and is optimized for 14.3 SEER2 systems, ideal for regular residential use. ML180UHE Furnace: The Lennox ML180UHE is an 80% AFUE single-stage gas furnace with a constant torque ECM blower motor, delivering reliable performance, improved airflow, and energy-efficient operation for standard-efficiency applications. CK40CT Evaporator Coil: The Lennox CK40CT is an all-aluminum cased coil for upflow/downflow installations. Durable and corrosion-resistant, it pairs with Lennox air conditioners and heat pumps for long-lasting performance. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a finish setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas system Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 2-Ton Bundle Cooling Efficiency (SEER2) 14.3 Condenser Model ML14KC1-024 Condenser Stages Single Furnace Model ML180UH045E36A Furnace Stages Single Furnace Efficiency 80% Furnace Capacity (BTU) 44K Furnace Cabinet Size A Heat Source Gas Coil Model CK40CT-24A Coil Cabinet Size A AHRI 216049450 Refrigerant R-454B Warranty 10 Year Units, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT BROCHURE

Read more less

Lennox is a trusted leader in home comfort, delivering high-performance HVAC systems that combine efficiency, reliability, and innovation. Focused on energy savings and durability, Lennox products meet top residential heating and cooling standards. Whether upgrading or installing new, Lennox offers advanced solutions to keep your home comfortable year-round. What's Included: ML14KP1 Heat Pump Condenser: A high-efficiency unit designed for optimal heating and cooling, featuring Lennox s durable construction and advanced technology for quiet operation and reliable comfort in any climate. CBK45UHPT Air Handler: Engineered for superior airflow and seamless compatibility with the ML14KP1 condenser, this air handler includes a corrosion-resistant aluminum coil for lasting performance and efficiency. ECB45 Heat Kit: Provides supplemental electric heating to ensure indoor comfort during colder months, enhancing system versatility and effectiveness. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a perform setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included components Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Heat Pump System Kit(Condenser & Coil + Air Handler) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line (outdoor) filter drier, locking caps, ArmaFlex insulation Refrigerant line (indoor) bi-flow filter drier, ArmaFlex insulation Drainage & safety secondary drain pan, float switch, P-trap PVC fittings couplings, elbows, adapters for condensate line Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will inspect on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our fitting causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM pieces warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 1.5-Ton Bundle Cooling Efficiency (SEER2) 14.3 Condenser Model ML14KP1-018 Condenser Stages Single Air Handler Model CBK45UHPT-018 Air Handler Stages Single - 3-Speed Motor Air Handler Capacity 18k Air Handler Cabinet Size B Heat Source Electric Heat Kit Model ECB45-10CB AHRI Number 215685480 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Air Handler Heat Kit LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT BROCHURE INSTALL INSTRUCTIONS Manor Heat and Air provides quality HVAC equipment, parts, and accessories for residential and light commercial heating, cooling, and ventilation systems. With trusted brands and expert support, we simplify your HVAC needs by delivering reliable products and

Read more less

Lennox is a trusted leader in home comfort, delivering high-performance HVAC systems that combine efficiency, reliability, and innovation. Focused on energy savings and durability, Lennox products meet top standards in residential heating and cooling. Whether upgrading or installing new, Lennox offers advanced solutions to keep your home comfortable year-round. What's Included: Lennox Condenser: A high-efficiency, single-stage air conditioner condenser designed for reliable, energy-efficient cooling with durable construction optimized for residential use. Lennox Furnace: A 80% AFUE single-stage gas furnace providing dependable comfort, lower energy use, and quiet execution in a compact design. Lennox Evaporator Coil: A high-efficiency, all-aluminum cased coil for horizontal applications offering durability and corrosion resistance, pairing well with Lennox air conditioners for long-lasting performance. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas system Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (conventional composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line setup Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing further is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our fitting causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 1.5-Ton Bundle Cooling Efficiency (SEER2) 14.3 Condenser Model ML14KC1-018 Condenser Stages Single Furnace Model ML180UH045E36A Furnace Stages Single Furnace Efficiency 80% Furnace Capacity (BTU) 44K Furnace Cabinet Size A Heat Source Gas Coil Model CK40HT-24A Coil Cabinet Size A AHRI 215578778 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM)

Read more less

Lennox is a dependable leader in home comfort, delivering high-performance HVAC systems that combine efficiency, reliability, and innovation. Committed on energy savings and durability, Lennox products meet top standards in residential heating and cooling. Whether upgrading or installing new, Lennox offers advanced solutions to keep your home comfortable year-round. What's Included: MLKC1 Condenser: The Lennox MLKC1 is a single-stage air conditioner condenser designed for reliable, energy-efficient cooling. Built with a durable cabinet and optimized for 14.3 SEER2 systems, it suits standard residential use. ML180UHE Furnace: The Lennox ML180UHE is an 80% AFUE single-stage gas furnace with a constant torque ECM blower motor, offering reliable functionality, improved airflow, and energy-efficient operation for standard-efficiency needs. CK40HT Evaporator Coil: The Lennox CK40HT is a high-efficiency, all-aluminum cased coil for horizontal applications. Durable and corrosion-resistant, it pairs with Lennox air conditioners and heat pumps for long-lasting performance. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full unit start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas system Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, swap, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 2-Ton Bundle Cooling Efficiency (SEER2) 14.3 Condenser Model ML14KC1-024 Condenser Stages Single Furnace Model ML180UH045E36A Furnace Stages Single Furnace Efficiency 80% Furnace Capacity (BTU) 44K Furnace Cabinet Size A Heat Source Gas Coil Model CK40HT-24A Coil Cabinet Size A AHRI 215580668 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT BROCHURE

Read more less

The Goodman HVAC system offered by Manor Heat and Air combines an energy-efficient condenser, a reliable heating component, and a high-performance evaporator coil to provide consistent heating and cooling for small to medium-sized homes in Manor, TX. Engineered for durability and comfort, it ensures year-round indoor climate control. What's Included: Goodman GLXS4BA2410 Condenser: Goodman GLXS4B single-stage air conditioner rated up to 15.2 SEER2, with an energy-efficient compressor, copper tube/enhanced aluminum-fin coil, and factory-installed filter drier. Goodman GR9S960403AN Furnace: Goodman GR9S96 single-stage, multi-speed ECM gas furnace rated up to 96% AFUE, with a heavy-duty aluminized-steel tubular primary heat exchanger, stainless-steel secondary heat exchanger, and silicon-nitride igniter. Goodman CAPTA2422A3 Evaporator Coil: Goodman CHPTA/CAPTA cased upflow/downflow/horizontal evaporator coil with internal TXV, all-aluminum construction, and an insulated, compact cabinet for space-limited installations. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, your technician will note it on your estimate before work begins. SPECIFICATIONS Bundle Size/Tonnage 2 Ton Bundle Cooling Efficiency (SEER2) 14.3 SEER2 Condenser Model GLXS4BA2410 Condenser Stages Single Furnace Model GR9S960403AN Furnace Stage/Blower Single Furnace Efficiency 96% Furnace Capacity (BTU) 60K Furnace Cabinet Size A Heat Source Gas Coil Model CAPTA2422A3 Coil Cabinet Size A AHRI 215214637 Refrigerant R-32 Warranty 10-Year Parts (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY SPEC SHEET SPEC SHEET SPEC SHEET

Read more less

The Goodman HVAC system offered by Manor Heat and Air combines an energy-efficient condenser, a reliable heating component, and a high-performance evaporator coil to provide consistent heating and cooling for small to medium-sized homes in Manor, TX. Engineered for durability and comfort, it ensures year-round indoor climate control. What's Included: Goodman GLXS4BA1810 Condenser: Goodman GLXS4B single-stage air conditioner rated up to 15.2 SEER2, with an energy-efficient compressor, copper tube/enhanced aluminum-fin coil, and factory-installed filter drier. Goodman GR9S960603BN Furnace: Goodman GR9S96 single-stage, multi-speed ECM gas furnace rated up to 96% AFUE, with a heavy-duty aluminized-steel tubular primary heat exchanger, stainless-steel secondary heat exchanger, and silicon-nitride igniter. Goodman CHPTA1822B3 Evaporator Coil: Goodman CHPTA/CAPTA cased upflow/downflow/horizontal evaporator coil with internal TXV, all-aluminum construction, and an insulated, compact cabinet for space-limited installations. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, your technician will note it on your estimate before work begins. SPECIFICATIONS Bundle Size/Tonnage 1.5 Ton Bundle Cooling Efficiency (SEER2) 14.5 SEER2 Condenser Model GLXS4BA1810 Condenser Stages Single Furnace Model GR9S960603BN Furnace Stage/Blower Single Furnace Efficiency 96% Furnace Capacity (BTU) 60K Furnace Cabinet Size B Heat Source Gas Coil Model CHPTA1822B3 Coil Cabinet Size B AHRI 215214590 Refrigerant R-32 Warranty 10-Year Parts (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY SPEC SHEET SPEC SHEET SPEC SHEET

Read more less

Lennox is a trusted leader in home comfort, delivering high-performance HVAC systems that combine efficiency, reliability, and innovation. Focused on energy savings and durability, Lennox products meet top standards in residential heating and cooling. Whether upgrading or installing new, Lennox offers advanced solutions to keep your home comfortable year-round. What's Included: Lennox Condenser: A high-efficiency, single-stage air conditioner condenser designed for reliable, energy-efficient cooling with durable construction optimized for residential use. Lennox Furnace: A 80% AFUE single-stage gas furnace providing dependable comfort, lower energy use, and quiet operation in a compact design. Lennox Evaporator Coil: A high-efficiency, all-aluminum cased coil for upflow/downflow applications offering durability and corrosion resistance, pairing well with Lennox air conditioners for long-lasting functionality. Includes licensed and insured HVAC mounting by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas system Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, swap, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line fitting Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 2.5-Ton Bundle Cooling Efficiency (SEER2) 14.3 Condenser Model ML14KC1-030 Condenser Stages Single Furnace Model ML180UH070E36B Furnace Stages Single Furnace Efficiency 80% Furnace Capacity (BTU) 66k Furnace Cabinet Size B Heat Source Gas Coil Model CK40CT-30B Coil Cabinet Size B AHRI 215581490 Refrigerant R-454B Warranty 10 Year Elements, 10 Year Compressor (When Registered with OEM)

Read more less

Lennox is a trusted leader in home comfort, offering high-performance HVAC systems that combine efficiency, reliability, and innovation. Designed for energy savings and durability, Lennox products meet top residential heating and cooling standards. Whether upgrading or installing new, Lennox provides advanced solutions to keep your home comfortable year-round. What's Included: ML14KP1 Heat Pump Condenser: A high-efficiency unit with durable construction and advanced technology for quiet operation and reliable comfort in any climate. CBK45UHPT Air Handler: Designed for superior airflow and compatibility with the ML14KP1 condenser, featuring a corrosion-resistant aluminum coil for lasting functionality and efficiency. ECB45 Heat Kit: Provides supplemental electric heating to guarantee indoor comfort during colder months, enhancing system versatility and effectiveness. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full configuration start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Heat Pump System Kit(Condenser & Coil + Air Handler) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line (outdoor) filter drier, locking caps, ArmaFlex insulation Refrigerant line (indoor) bi-flow filter drier, ArmaFlex insulation Drainage & safety secondary drain pan, float switch, P-trap PVC fittings couplings, elbows, adapters for condensate line Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line mounting Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of deployment. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 2.5-Ton Bundle Cooling Efficiency (SEER2) 14.3 Condenser Model ML14KP1-030 Condenser Stages Single Air Handler Model CBK45UHPT-030 Air Handler Stages Single - 3-Speed Motor Air Handler Capacity 030K Air Handler Cabinet Size B Heat Source Electric Heat Kit Model ECB45-10CB AHRI Number 215712349 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM)

Read more less

Lennox is a trusted leader in home comfort, delivering high-performance HVAC systems that combine efficiency, reliability, and innovation. Focused on energy savings and durability, Lennox products meet top residential heating and cooling standards. Whether upgrading or installing new, Lennox offers advanced solutions to keep your home comfortable year-round. What's Included: MLKC1 Condenser: The Lennox MLKC1 is a single-stage air conditioner condenser designed for reliable, fuel-efficient cooling. Built with a long-lasting cabinet and optimized for 14.3 SEER2 systems, it suits standard residential use. ML180UHV Furnace: The Lennox ML180UHV is an 80% AFUE single-stage furnace with a variable-speed blower motor, providing consistent airflow, better temperature control, and quieter operation for improved comfort. CK40CT Evaporator Coil: The Lennox CK40CT is an all-aluminum cased coil for upflow/downflow installations. Durable and corrosion-resistant, it pairs well with Lennox air conditioners and heat pumps for reliable performance. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas system Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included This listing covers the equipment and regular installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (basic thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any further work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 1.5-Ton Bundle Cooling Efficiency (SEER2) 14.3 Condenser Model ML14KC1-018 Condenser Stages Single Furnace Model ML180UH045V36A Furnace Stages Single Furnace Efficiency 80% Furnace Capacity (BTU) 44K Furnace Cabinet Size A Heat Source Gas Coil Model CK40CT-24A Coil Cabinet Size A AHRI 215578595 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT BROCHURE

Read more less

Lennox is a trusted leader in home comfort, offering high-performance HVAC systems that combine efficiency, reliability, and innovation. Designed for power savings and durability, Lennox products meet top residential thermal and cooling standards. Whether upgrading or installing new, Lennox provides advanced solutions to keep your home comfortable year-round. What's Included: ML14KP1 Heat Pump Condenser: A high-efficiency unit with durable construction and advanced technology for quiet operation and reliable comfort in any climate. CBK45UHVT Air Handler: Features a variable-speed blower motor and durable aluminum coil for efficient airflow, quiet operation, improved humidity control, and long-lasting system efficiency. Designed to pair with Lennox outdoor units. ECB45 Heat Kit: Provides supplemental electric heating to ensure indoor comfort during colder months, enhancing system versatility and effectiveness. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Heat Pump System Kit(Condenser & Coil + Air Handler) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line (outdoor) filter drier, locking caps, ArmaFlex insulation Refrigerant line (indoor) bi-flow filter drier, ArmaFlex insulation Drainage & safety secondary drain pan, float switch, P-trap PVC fittings couplings, elbows, adapters for condensate line Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line deployment Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after fitting If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing supplementary is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 2-Ton Bundle Cooling Efficiency (SEER2) 14.3 Condenser Model ML14KP1-024 Condenser Stages Single Air Handler Model CBK45UHVT-024 Air Handler Stages Single Stage - Variable Speed Motor Air Handler Capacity 024K Air Handler Cabinet Size B Heat Source Electric Heat Kit Model ECB45-10CB AHRI Number 215710133 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM)

Read more less

Lennox is a trusted leader in home comfort, offering high-performance HVAC systems that combine efficiency, reliability, and innovation. Concentrated on electricity savings and durability, Lennox products meet top residential heating and cooling standards. Whether upgrading or installing new, Lennox provides advanced solutions to keep your home comfortable year-round. What's Included: MLKC1 Condenser: The Lennox MLKC1 is a single-stage air conditioner condenser designed for reliable, energy-efficient cooling. Built with a durable cabinet and optimized for 14.3 SEER2 systems, it suits standard residential use. ML180UHV Furnace: The Lennox ML180UHV is an 80% AFUE single-stage furnace with a variable-speed blower motor, providing consistent airflow, better temperature control, and quieter operation for improved comfort. CK40CT Evaporator Coil: The Lennox CK40CT is an all-aluminum cased coil for upflow/downflow installations. Robust and corrosion-resistant, it pairs with Lennox air conditioners and heat pumps for reliable performance. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas system Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (regular thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Elements replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 2-Ton Bundle Cooling Efficiency (SEER2) 14.3 Condenser Model ML14KC1-024 Condenser Stages Single Furnace Model ML180UH045V36A Furnace Stages Single Furnace Efficiency 80% Furnace Capacity (BTU) 44K Furnace Cabinet Size A Heat Source Gas Coil Model CK40CT-24A Coil Cabinet Size A AHRI 215580242 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT BROCHURE

Read more less

Lennox is a trusted leader in home comfort, offering high-performance HVAC systems that combine efficiency, reliability, and innovation. Focused on energy savings and durability, Lennox products meet top residential heating and cooling standards. Whether upgrading or installing new, Lennox provides advanced solutions to keep your home comfortable year-round. What's Included: MLKC1 Condenser: The Lennox MLKC1 is a single-stage air conditioner condenser designed for trustworthy, energy-efficient cooling. It features a durable cabinet and is optimized for 14.3 SEER2 systems, ideal for standard residential use. ML180UHE Furnace: The Lennox ML180UHE is an 80% AFUE single-stage gas furnace with a constant torque ECM blower motor, offering reliable performance, improved airflow, and energy-streamlined running for standard-efficiency applications. CK40CT Evaporator Coil: The Lennox CK40CT is an all-aluminum cased coil for upflow/downflow installations. Durable and corrosion-resistant, it pairs with Lennox air conditioners and heat pumps for long-lasting performance. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas system Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included This listing covers the equipment and standard mounting scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (typical composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 3-Ton Bundle Cooling Efficiency (SEER2) 14.3 Condenser Model ML14KC1-036 Condenser Stages Single Furnace Model ML180UH070E36B Furnace Stages Single Furnace Efficiency 80% Furnace Capacity (BTU) 66k Furnace Cabinet Size B Heat Source Gas Coil Model CK40CT-36B Coil Cabinet Size B AHRI 215582464 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT BROCHURE

Read more less

Lennox is a trusted leader in home comfort, offering high-performance HVAC systems that combine efficiency, reliability, and innovation. Focused on energy savings and durability, Lennox products meet top residential heating and cooling standards. Whether upgrading or installing new, Lennox provides advanced solutions to keep your home comfortable year-round. What's Included: MLKC1 Condenser: The Lennox MLKC1 is a single-stage air conditioner condenser designed for reliable, energy-streamlined cooling. It features a durable cabinet and is optimized for 14.3 SEER2 systems, ideal for standard residential use. ML180UHV Furnace: The Lennox ML180UHV is an 80% AFUE single-stage furnace with a variable-speed blower motor, offering consistent airflow, better temperature control, and quieter operation for improved comfort. CK40HT Evaporator Coil: The Lennox CK40HT is a high-efficiency, all-aluminum cased coil for horizontal applications. Durable and corrosion-resistant, it pairs well with Lennox air conditioners and heat pumps for long-lasting performance. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full setup start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas system Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, swap, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing further is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 1.5-Ton Bundle Cooling Efficiency (SEER2) 14.3 Condenser Model ML14KC1-018 Condenser Stages Single Furnace Model ML180UH045V36A Furnace Stages Single Furnace Efficiency 80% Furnace Capacity (BTU) 44K Furnace Cabinet Size A Heat Source Gas Coil Model CK40HT-24A Coil Cabinet Size A AHRI 215578779 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT BROCHURE

Read more less

The Goodman HVAC system offered by Manor Heat and Air combines an energy-efficient condenser, a reliable heating component, and a high-performance evaporator coil to provide consistent heating and cooling for small to medium-sized homes in Manor, TX. Engineered for durability and comfort, it ensures year-round indoor climate control. What's Included: Goodman GLXS4BA2410 Condenser: Goodman GLXS4B single-stage air conditioner rated up to 15.2 SEER2, with an energy-efficient compressor, copper tube/enhanced aluminum-fin coil, and factory-installed filter drier. Goodman GR9S960603BN Furnace: Goodman GR9S96 single-stage, multi-speed ECM gas furnace rated up to 96% AFUE, with a heavy-duty aluminized-steel tubular primary heat exchanger, stainless-steel secondary heat exchanger, and silicon-nitride igniter. Goodman CHPTA2426B3 Evaporator Coil: Goodman CHPTA/CAPTA cased upflow/downflow/horizontal evaporator coil with internal TXV, all-aluminum construction, and an insulated, compact cabinet for space-limited installations. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, your technician will note it on your estimate before work begins. SPECIFICATIONS Bundle Size/Tonnage 2 Ton Bundle Cooling Efficiency (SEER2) 14.3 SEER2 Condenser Model GLXS4BA2410 Condenser Stages Single Furnace Model GR9S960603BN Furnace Stage/Blower Single Furnace Efficiency 96% Furnace Capacity (BTU) 60K Furnace Cabinet Size B Heat Source Gas Coil Model CHPTA2426B3 Coil Cabinet Size B AHRI 215214702 Refrigerant R-32 Warranty 10-Year Parts (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY SPEC SHEET SPEC SHEET SPEC SHEET

Read more less

Lennox is a trusted leader in home comfort, offering high-performance HVAC systems that combine efficiency, reliability, and innovation. Focused on energy savings and durability, Lennox products meet top standards in residential heating and cooling. Whether upgrading or installing new, Lennox provides advanced solutions to keep your home comfortable year-round. What's Included: MLKC1 Condenser: The Lennox MLKC1 is a single-stage air conditioner condenser designed for reliable, electricity-efficient cooling. Built with a durable cabinet and optimized for 14.3 SEER2 systems, it suits conventional residential use. ML180UHE Furnace: The Lennox ML180UHE is an 80% AFUE single-stage gas furnace with a constant torque ECM blower motor, delivering reliable performance, improved airflow, and energy-conscious performance for standard-efficiency needs. CK40HT Evaporator Coil: The Lennox CK40HT is a high-efficiency, all-aluminum cased coil for horizontal applications. Durable and corrosion-resistant, it pairs with Lennox air conditioners and heat pumps for long-lasting performance. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas system Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after deployment If any of the above are needed for your property, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 2.5-Ton Bundle Cooling Efficiency (SEER2) 14.3 Condenser Model ML14KC1-030 Condenser Stages Single Furnace Model ML180UH070E36B Furnace Stages Single Furnace Efficiency 80% Furnace Capacity (BTU) 66k Furnace Cabinet Size B Heat Source Gas Coil Model CK40HT-30B Coil Cabinet Size B AHRI 215581886 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT BROCHURE

Read more less