Lennox is a dependable leader in home comfort, offering high-performance HVAC systems that combine efficiency, reliability, and innovation. Designed for energy savings and durability, Lennox products meet top residential thermal and cooling standards. Whether upgrading or installing new, Lennox provides advanced solutions to keep your home comfortable year-round. What's Included: ML14KP1 Heat Pump Condenser: A high-efficiency unit with durable construction and advanced technology for quiet operation and reliable comfort in any climate. CBK45UHPT Air Handler: Designed for superior airflow and compatibility with the ML14KP1 condenser, featuring a corrosion-resistant aluminum coil for lasting performance and efficiency. ECB45 Heat Kit: Provides supplemental electric heating to ensure indoor comfort during colder months, enhancing system versatility and effectiveness. Includes licensed and insured HVAC fitting by professionals, along with the Install Kit for a perform setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Heat Pump System Kit(Condenser & Coil + Air Handler) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line (outdoor) filter drier, locking caps, ArmaFlex insulation Refrigerant line (indoor) bi-flow filter drier, ArmaFlex insulation Drainage & safety secondary drain pan, float switch, P-trap PVC fittings couplings, elbows, adapters for condensate line Not Included This listing covers the equipment and typical installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 3-Ton Bundle Cooling Efficiency (SEER2) 14.3 Condenser Model ML14KP1-036 Condenser Stages Single Air Handler Model CBK45UHPT-036 Air Handler Stages Single - 3-Speed Motor Air Handler Capacity 036K Air Handler Cabinet Size B Heat Source Electric Heat Kit Model ECB45-10CB AHRI Number 215735588 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM)

Read more less

Lennox is a trusted leader in home comfort, offering high-performance HVAC systems that combine efficiency, reliability, and innovation. Focused on energy savings and durability, Lennox products meet top standards in residential heating and cooling. Whether upgrading or installing new, Lennox provides advanced solutions to keep your home comfortable year-round. What's Included: MLKC1 Condenser: The Lennox MLKC1 is a single-stage air conditioner condenser designed for reliable, energy-efficient cooling. It features a durable cabinet and is optimized for 14.3 SEER2 systems, ideal for standard residential use. ML180UHV Furnace: CK40HT Evaporator Coil: The Lennox CK40HT is a high-efficiency, all-aluminum cased coil for horizontal applications. Built for durability and corrosion resistance, it pairs with Lennox air conditioners and heat pumps for reliable performance. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a execute setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included components Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas system Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after setup If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 2-Ton Bundle Cooling Efficiency (SEER2) 14.3 Condenser Model ML14KC1-024 Condenser Stages Single Furnace Model ML180UH045V36A Furnace Stages Single Furnace Efficiency 80% Furnace Capacity (BTU) 44K Furnace Cabinet Size A Heat Source Gas Coil Model CK40HT-24A Coil Cabinet Size A AHRI 215580670 Refrigerant R-454B Warranty 10 Year Elements, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT BROCHURE PRODUCT SPECS

Read more less

The Goodman HVAC system offered by Manor Heat and Air combines an energy-efficient condenser, a reliable heating component, and a high-performance evaporator coil to provide consistent heating and cooling for small to medium-sized homes in Manor, TX. Engineered for durability and comfort, it ensures year-round indoor climate control. What's Included: Goodman GLXS4BA3010 Condenser: Goodman GLXS4B single-stage air conditioner rated up to 15.2 SEER2, with an energy-efficient compressor, copper tube/enhanced aluminum-fin coil, and factory-installed filter drier. Goodman GR9S960603BN Furnace: Goodman GR9S96 single-stage, multi-speed ECM gas furnace rated up to 96% AFUE, with a heavy-duty aluminized-steel tubular primary heat exchanger, stainless-steel secondary heat exchanger, and silicon-nitride igniter. Goodman CHPTA3026B3 Evaporator Coil: Goodman CHPTA/CAPTA cased upflow/downflow/horizontal evaporator coil with internal TXV, all-aluminum construction, and an insulated, compact cabinet for space-limited installations. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, your technician will note it on your estimate before work begins. SPECIFICATIONS Bundle Size/Tonnage 2.5 Ton Bundle Cooling Efficiency (SEER2) 14.5 SEER2 Condenser Model GLXS4BA3010 Condenser Stages Single Furnace Model GR9S960603BN Furnace Stage/Blower Single Furnace Efficiency 96% Furnace Capacity (BTU) 60K Furnace Cabinet Size B Heat Source Gas Coil Model CHPTA3026B3 Coil Cabinet Size B AHRI 215214853 Refrigerant R-32 Warranty 10-Year Parts (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY SPEC SHEET SPEC SHEET SPEC SHEET

Read more less

Lennox is a trusted leader in home comfort, delivering high-performance HVAC systems that combine efficiency, reliability, and innovation. Focused on energy savings and durability, Lennox products meet top residential heating and cooling standards. Whether upgrading or installing new, Lennox offers advanced solutions to keep your home comfortable year-round. What's Included: MLKC1 Condenser: The Lennox MLKC1 is a single-stage air conditioner condenser designed for reliable, energy-efficient cooling. Built with a durable cabinet and optimized for 14.3 SEER2 systems, it suits standard residential use. ML180UHV Furnace: The Lennox ML180UHV is an 80% AFUE single-stage furnace with a variable-speed blower motor, providing consistent airflow, better temperature control, and quieter operation for improved comfort. CK40CT Evaporator Coil: The Lennox CK40CT is an all-aluminum cased coil for upflow/downflow installations. Durable and corrosion-resistant, it pairs with Lennox air conditioners and heat pumps for consistent, long-lasting performance. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas system Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included This listing covers the equipment and regular installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the basic disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM units warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 2.5-Ton Bundle Cooling Efficiency (SEER2) 14.3 Condenser Model ML14KC1-030 Condenser Stages Single Furnace Model ML180UH070V36B Furnace Stages Single Furnace Efficiency 80% Furnace Capacity (BTU) 66k Furnace Cabinet Size B Heat Source Gas Coil Model CK40CT-30B Coil Cabinet Size B AHRI 215581492 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT BROCHURE

Read more less

Lennox is a trusted leader in home comfort, delivering high-performance HVAC systems that combine efficiency, reliability, and innovation. Focused on electricity savings and durability, Lennox products meet top standards in residential heating and cooling. Whether upgrading or installing new, Lennox offers advanced solutions to keep your home comfortable year-round. What's Included: ML14KP1 Heat Pump Condenser: A high-efficiency unit designed for optimal heating and cooling, featuring Lennox s durable construction and advanced technology for quiet operation and reliable comfort in any climate. CBK45UHVT Air Handler: Engineered for reliable performance and efficient airflow, it features a variable-speed blower motor and durable aluminum coil. Crafted to pair with Lennox outdoor units, it delivers quiet operation, improved humidity control, and long-lasting efficiency. ECB45 Heat Kit: Provides supplemental electric heating to ensure indoor satisfaction during colder months, enhancing system versatility and effectiveness. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Setup of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Heat Pump System Kit(Condenser & Coil + Air Handler) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line (outdoor) filter drier, locking caps, ArmaFlex insulation Refrigerant line (indoor) bi-flow filter drier, ArmaFlex insulation Drainage & safety secondary drain pan, float switch, P-trap PVC fittings couplings, elbows, adapters for condensate line Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 2.5-Ton Bundle Cooling Efficiency (SEER2) 14.3 Condenser Model ML14KP1-030 Condenser Stages Single Air Handler Model CBK45UHVT-030 Air Handler Stages Single Stage - Variable Speed Motor Air Handler Capacity 30K Air Handler Cabinet Size B Heat Source Electric Heat Kit Model ECB45-10CB AHRI Number 215712353 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Air Handler Heat Kit LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT BROCHURE INSTALL INSTRUCTIONS Manor Heat and Air provides quality HVAC equipment, parts, and accessories for residential and light commercial heating, cooling, and ventilation systems. With trusted brands and

Read more less

Lennox is a trusted leader in home comfort, delivering high-functionality HVAC systems that combine efficiency, reliability, and innovation. Concentrated on energy savings and durability, Lennox products meet top residential heating and cooling standards. Whether upgrading or installing new, Lennox offers advanced solutions to keep your home comfortable year-round. What's Included: MLKC1 Condenser: The Lennox MLKC1 is a single-stage air conditioner condenser designed for dependable, energy-efficient cooling. Built with a long-lasting cabinet and optimized for 14.3 SEER2 systems, it suits standard residential use. ML180UHE Furnace: The Lennox ML180UHE is an 80% AFUE single-stage gas furnace with a constant torque ECM blower motor, offering reliable performance, improved airflow, and energy-conscious operation for standard-efficiency needs. CK40HT Evaporator Coil: The Lennox CK40HT is a high-efficiency, all-aluminum cased coil for horizontal applications. Durable and corrosion-resistant, it pairs with Lennox air conditioners and heat pumps for long-lasting performance. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas system Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your residence, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 3-Ton Bundle Cooling Efficiency (SEER2) 14.3 Condenser Model ML14KC1-036 Condenser Stages Single Furnace Model ML180UH070E36B Furnace Stages Single Furnace Efficiency 80% Furnace Capacity (BTU) 66k Furnace Cabinet Size B Heat Source Gas Coil Model CK40HT-42B Coil Cabinet Size B AHRI 215583015 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT BROCHURE

Read more less

The Goodman HVAC system offered by Manor Heat and Air combines an energy-efficient condenser, a reliable heating component, and a high-performance evaporator coil to provide consistent heating and cooling for small to medium-sized homes in Manor, TX. Engineered for durability and comfort, it ensures year-round indoor climate control. What's Included: Goodman GLZS4BA3610 Heat Pump Condenser: Goodman GLZS4B single-stage heat pump delivering up to 15.2 SEER2 and 7.8 HSPF2, with an energy-efficient compressor, SmartShift technology for quiet, reliable defrost, and enhanced aluminum-fin coils. Goodman AMST36CU1300 Air Handler: Goodman AMST energy-efficient, multi-position, multi-speed ECM air handler with a factory-installed TXV, all-aluminum evaporator coil, optimized for pairing with single-stage AC or heat-pump condensers. Goodman HKTSD15XB Heat Kit: Goodman HKTSD electric heat kit accessory for AMST-series air handlers, factory-assembled and tested with plug-in wiring harness, sequencer staging, and a fuse-link high-temperature limit control. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Heat Pump Kit (Condenser + Air Handler & Heat Kit) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Electric heat kit factory-matched heat strip, field-installed and wired to OEM spec Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, your technician will note it on your estimate before work begins. SPECIFICATIONS Bundle Size/Tonnage 3 Ton Bundle Cooling Efficiency (SEER2) 14.3 SEER2 Condenser Model GLZS4BA3610 Condenser Stages Single Stage Air Handler Model AMST36CU1300 Air Handler Blower Constant Heat Kit Model HKTSD15XB Heat Source Heat Pump w/ Electric Backup AHRI 215213859 Refrigerant R-32 Warranty 10-Year Parts, 10-Year Compressor (When Registered with OEM) RESOURCES Condenser Air Handler LIMITED WARRANTY LIMITED WARRANTY SPEC SHEET SPEC SHEET

Read more less

Lennox is a trusted leader in home comfort, offering high-performance HVAC systems that combine efficiency, reliability, and innovation. Built for energy savings and durability, Lennox products meet top residential heating and cooling standards. Whether upgrading or installing new, Lennox provides advanced solutions to keep your home comfortable year-round. What's Included: MLKC1 Condenser: The Lennox MLKC1 is a single-stage air conditioner condenser built for reliable, energy-optimized cooling. It features a durable cabinet and is optimized for 14.3 SEER2 systems, ideal for standard residential use. ML180UHV Furnace: The Lennox ML180UHV is an 80% AFUE single-stage furnace with a variable-speed blower motor, offering stable airflow, improved temperature control, and quieter operation for enhanced comfort. CK40CT Evaporator Coil: The Lennox CK40CT is an all-aluminum cased coil for upflow/downflow installations. Durable and corrosion-resistant, it pairs with Lennox air conditioners and heat pumps for reliable, long-lasting performance. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas system Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, exchange, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (typical composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 3-Ton Bundle Cooling Efficiency (SEER2) 14.3 Condenser Model ML14KC1-036 Condenser Stages Single Furnace Model ML180UH070V36B Furnace Stages Single Furnace Efficiency 80% Furnace Capacity (BTU) 66k Furnace Cabinet Size B Heat Source Gas Coil Model CK40CT-36B Coil Cabinet Size B AHRI 215582465 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT BROCHURE

Read more less

The Goodman HVAC system offered by Manor Heat and Air combines an energy-efficient condenser, a reliable heating component, and a high-performance evaporator coil to provide consistent heating and cooling for small to medium-sized homes in Manor, TX. Engineered for durability and comfort, it ensures year-round indoor climate control. What's Included: Goodman GLXS4BA4210 Condenser: Goodman GLXS4B single-stage air conditioner rated up to 15.2 SEER2, with an energy-efficient compressor, copper tube/enhanced aluminum-fin coil, and factory-installed filter drier. Goodman GR9S800804CN Furnace: Goodman GR9S80 single-stage, multi-speed ECM, multi-position gas furnace at 80% AFUE, with a heavy-duty aluminized-steel dual-diameter tubular heat exchanger, hot-surface igniter, and self-diagnostic control board. Goodman CHPTA4230C3 Evaporator Coil: Goodman CHPTA/CAPTA cased upflow/downflow/horizontal evaporator coil with internal TXV, all-aluminum construction, and an insulated, compact cabinet for space-limited installations. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, your technician will note it on your estimate before work begins. SPECIFICATIONS Bundle Size/Tonnage 3.5 Ton Bundle Cooling Efficiency (SEER2) 14.5 SEER2 Condenser Model GLXS4BA4210 Condenser Stages Single Furnace Model GR9S800804CN Furnace Stage/Blower Single Furnace Efficiency 80% Furnace Capacity (BTU) 80K Furnace Cabinet Size C Heat Source Gas Coil Model CHPTA4230C3 Coil Cabinet Size C AHRI 214860001 Refrigerant R-32 Warranty 10-Year Parts (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY SPEC SHEET SPEC SHEET SPEC SHEET

Read more less

Lennox is a trusted leader in home comfort, offering high-performance HVAC systems that combine efficiency, reliability, and innovation. Designed for energy savings and durability, Lennox products meet top residential heating and cooling standards. Whether upgrading or installing new, Lennox provides advanced solutions to keep your home comfortable year-round. What's Included: MLKC1 Condenser: The Lennox MLKC1 is a single-stage air conditioner condenser built for reliable, energy-efficient cooling. It features a durable cabinet and is optimized for 14.3 SEER2 systems, ideal for standard residential use. ML180UHV Furnace: The Lennox ML180UHV is an 80% AFUE single-stage furnace with a variable-speed blower motor, offering consistent airflow, improved temperature control, and quieter operation for enhanced comfort. CK40HT Evaporator Coil: The Lennox CK40HT is a high-efficiency, all-aluminum cased coil for horizontal applications. Sturdy and corrosion-resistant, it pairs well with Lennox air conditioners and heat pumps for reliable performance. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Setup of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your property, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 2.5-Ton Bundle Cooling Efficiency (SEER2) 14.3 Condenser Model ML14KC1-030 Condenser Stages Single Furnace Model ML180UH070V36B Furnace Stages Single Furnace Efficiency 80% Furnace Capacity (BTU) 66k Furnace Cabinet Size B Heat Source Gas Coil Model CK40HT-30B Coil Cabinet Size B AHRI 215581887 Refrigerant R-454B Warranty 10 Year Elements, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT BROCHURE

Read more less

Lennox is a trusted leader in home comfort, offering high-performance HVAC systems that combine efficiency, reliability, and innovation. Focused on energy savings and durability, Lennox products meet top residential heating and cooling standards. Whether upgrading or installing new, Lennox provides advanced solutions to keep your home comfortable year-round. What's Included: MLKC1 Condenser: The Lennox MLKC1 is a single-stage air conditioner condenser designed for reliable, energy-efficient cooling. Built with a long-lasting cabinet and optimized for 14.3 SEER2 systems, it suits standard residential use. ML196UH Furnace: The Lennox ML196UH is a high-efficiency, 96% AFUE single-stage gas furnace with a constant torque ECM motor, offering dependable comfort, lower fuel use, and quiet operation in a compact design. CK40CT Evaporator Coil: The Lennox CK40CT is an all-aluminum cased coil for upflow/downflow installations, built for durability and corrosion resistance. It pairs well with Lennox air conditioners and heat pumps for reliable effectiveness. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included units Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 1.5-Ton Bundle Cooling Efficiency (SEER2) 14.3 Condenser Model ML14KC1-018 Condenser Stages Single Furnace Model ML196UH045XE36B Furnace Stages Single Furnace Efficiency 96% Furnace Capacity (BTU) 44K Furnace Cabinet Size B Heat Source Gas Coil Model CK40CT-24B Coil Cabinet Size B AHRI 215578624 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT BROCHURE

Read more less

The Goodman HVAC system offered by Manor Heat and Air combines an energy-efficient condenser, a reliable heating component, and a high-performance evaporator coil to provide consistent heating and cooling for small to medium-sized homes in Manor, TX. Engineered for durability and comfort, it ensures year-round indoor climate control. What's Included: Goodman GLXS4BA3610 Condenser: Goodman GLXS4B single-stage air conditioner rated up to 15.2 SEER2, with an energy-efficient compressor, copper tube/enhanced aluminum-fin coil, and factory-installed filter drier. Goodman GR9S960603BN Furnace: Goodman GR9S96 single-stage, multi-speed ECM gas furnace rated up to 96% AFUE, with a heavy-duty aluminized-steel tubular primary heat exchanger, stainless-steel secondary heat exchanger, and silicon-nitride igniter. Goodman CHPTA3630B3 Evaporator Coil: Goodman CHPTA/CAPTA cased upflow/downflow/horizontal evaporator coil with internal TXV, all-aluminum construction, and an insulated, compact cabinet for space-limited installations. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, your technician will note it on your estimate before work begins. SPECIFICATIONS Bundle Size/Tonnage 3 Ton Bundle Cooling Efficiency (SEER2) 14.5 SEER2 Condenser Model GLXS4BA3610 Condenser Stages Single Furnace Model GR9S960603BN Furnace Stage/Blower Single Furnace Efficiency 96% Furnace Capacity (BTU) 60K Furnace Cabinet Size B Heat Source Gas Coil Model CHPTA3630B3 Coil Cabinet Size B AHRI 214859782 Refrigerant R-32 Warranty 10-Year Parts (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY SPEC SHEET SPEC SHEET SPEC SHEET

Read more less

Lennox is a trusted leader in home comfort, offering excellent HVAC systems that combine efficiency, reliability, and innovation. Designed for energy savings and durability, Lennox products meet top residential heating and cooling standards. Whether upgrading or installing new, Lennox provides advanced solutions to keep your home comfortable year-round. What's Included: MLKC1 Condenser: The Lennox MLKC1 is a single-stage air conditioner condenser built for reliable, energy-efficient cooling. It includes a sturdy cabinet and is optimized for 14.3 SEER2 systems, ideal for standard residential use. ML180UHE Furnace: The Lennox ML180UHE is an 80% AFUE single-stage gas furnace with a constant torque ECM blower motor, offering reliable performance, improved airflow, and energy-efficient operation for standard-efficiency needs. CK40CT Evaporator Coil: The Lennox CK40CT is an all-aluminum cased coil for upflow/downflow installations. Durable and corrosion-resistant, it pairs well with Lennox air conditioners and heat pumps for long-lasting performance. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas system Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and furnish a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 3.5-Ton Bundle Cooling Efficiency (SEER2) 14.3 Condenser Model ML14KC1-042 Condenser Stages Single Furnace Model ML180UH090E48B Furnace Stages Single Furnace Efficiency 80% Furnace Capacity (BTU) 88k Furnace Cabinet Size B Heat Source Gas Coil Model CK40CT-48B Coil Cabinet Size B AHRI 215583942 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT BROCHURE

Read more less

The RunTru all-electric HVAC system offered by Manor Heat and Air, featuring the heat pump condenser, air handler, and heat kits, delivers energy-efficient, reliable comfort for homes. Designed by the dependable Trane family, this system combines advanced performance and affordability for year-round climate control. With heating, cooling, and supplemental electric heat, it s ideal for homes seeking all-electric efficiency and comfort. What's Included: A5HP40 Heat Pump Condenser: Provides efficient heating and cooling performance, ensuring year-round comfort with reliable heat transfer even in changing weather conditions. Built with durable construction to withstand harsh elements. A5AHC Air Handler: Equipped with a multi-speed blower, it delivers enhanced airflow, consistent temperature control, and quiet operation. Designed for energy efficiency and easy installation. BAYHTR Heat Kits: Offers electric heat backup for additional warmth during colder months, ensuring dependable operation when outdoor temperatures dip. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Heat Pump System Kit(Condenser & Coil + Air Handler) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line (outdoor) filter drier, locking caps, ArmaFlex insulation Refrigerant line (indoor) bi-flow filter drier, ArmaFlex insulation Drainage & safety secondary drain pan, float switch, P-trap PVC fittings couplings, elbows, adapters for condensate line Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (regular thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 1.5 Ton Bundle Cooling Efficiency (SEER2) 14.3 Seer 2 Heat Pump Condenser Model A5HP4018 Heat Pump Condenser Stages Single Air Handler Model A5AHC002A1B30A Air Handler Stages Single Air Handler Capacity (BTU) 18k-24k Air Handler Cabinet Size B Heat Source Electric Heat Kit Model BAYHTR1505BRK Heat Kit Output 5KW AHRI 215610992 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM)

Read more less

Lennox is a trusted leader in home comfort, delivering high-performance HVAC systems that combine efficiency, reliability, and innovation. Focused on energy savings and durability, Lennox products meet top standards in residential heating and cooling. Whether upgrading or installing new, Lennox offers advanced solutions to keep your home comfortable year-round. What's Included: MLKC1 Condenser: The Lennox MLKC1 is a single-stage air conditioner condenser designed for reliable, energy-efficient cooling. Built with a durable cabinet and optimized for 14.3 SEER2 systems, it suits standard residential use. ML196UH Furnace: The Lennox ML196UH is a high-efficiency, 96% AFUE single-stage gas furnace with a constant torque ECM motor, offering dependable comfort, lower energy use, and quiet operation in a compact design. CK40CT Evaporator Coil: The Lennox CK40CT is an all-aluminum cased coil for upflow/downflow installations. Durable and corrosion-resistant, it pairs with Lennox air conditioners and heat pumps for reliable, long-lasting efficiency. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas system Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line setup Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (typical thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing additional is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 2-Ton Bundle Cooling Efficiency (SEER2) 14.3 Condenser Model ML14KC1-024 Condenser Stages Single Furnace Model ML196UH045XE36B Furnace Stages Single Furnace Efficiency 96% Furnace Capacity (BTU) 44K Furnace Cabinet Size B Heat Source Gas Coil Model CK40CT-24B Coil Cabinet Size B AHRI 215580277 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT BROCHURE

Read more less

Lennox is a trusted leader in home comfort, delivering high-performance HVAC systems that combine efficiency, reliability, and innovation. Focused on energy savings and durability, Lennox products meet top standards in residential heating and cooling. Whether upgrading or installing new, Lennox offers advanced solutions to keep your home comfortable year-round. What's Included: MLKC1 Condenser: The Lennox MLKC1 is a single-stage air conditioner condenser designed for reliable, energy-efficient cooling. Built with a durable cabinet and optimized for 14.3 SEER2 systems, it suits standard residential use. ML196UH Furnace: The Lennox ML196UH is a high-efficiency, 96% AFUE single-stage gas furnace with a constant torque ECM motor, offering dependable comfort, lower energy use, and quiet operation in a compact design. CK40HT Evaporator Coil: The Lennox CK40HT is a high-efficiency, all-aluminum cased coil for horizontal applications. Durable and corrosion-resistant, it pairs with Lennox air conditioners and heat pumps for dependable performance. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Fitting of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas system Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will evaluate on-site and provide a written change-order quote before any added work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of setup. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 1.5-Ton Bundle Cooling Efficiency (SEER2) 14.3 Condenser Model ML14KC1-018 Condenser Stages Single Furnace Model ML196UH045XE36B Furnace Stages Single Furnace Efficiency 96% Furnace Capacity (BTU) 44K Furnace Cabinet Size B Heat Source Gas Coil Model CK40HT-24B Coil Cabinet Size B AHRI 215578804 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT BROCHURE

Read more less

Lennox is a trusted leader in residence comfort, offering high-performance HVAC systems that combine efficiency, reliability, and innovation. Designed for fuel savings and durability, Lennox products meet top residential heating and cooling standards. Whether upgrading or installing new, Lennox provides advanced solutions to keep your home comfortable year-round. What's Included: ML14KP1 Heat Pump Condenser: A high-efficiency unit with durable construction and advanced technology for quiet operation and reliable ease in any climate. CBK45UHPT Air Handler: Designed for superior airflow and compatibility with the ML14KP1 condenser, featuring a corrosion-resistant aluminum coil for lasting performance and efficiency. ECB45 Heat Kit: Provides supplemental electric heating to maintain indoor comfort during colder months, enhancing system versatility. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Heat Pump System Kit(Condenser & Coil + Air Handler) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line (outdoor) filter drier, locking caps, ArmaFlex insulation Refrigerant line (indoor) bi-flow filter drier, ArmaFlex insulation Drainage & safety secondary drain pan, float switch, P-trap PVC fittings couplings, elbows, adapters for condensate line Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after mounting If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of deployment. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 3-Ton Bundle Cooling Efficiency (SEER2) 14.3 Condenser Model ML14KP1-036 Condenser Stages Single Air Handler Model CBK45UHPT-036 Air Handler Stages Single - 3-Speed Motor Air Handler Capacity 36K Air Handler Cabinet Size B Heat Source Electric Heat Kit Model ECB45-10CB AHRI Number 215735588 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Air Handler Heat Kit LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT BROCHURE INSTALL INSTRUCTIONS Manor Heat and Air offers quality HVAC equipment, parts, and accessories for residential and light commercial heating, cooling, and ventilation. With trusted brands and expert support, we simplify your HVAC needs by providing reliable products and solutions for installation and delivery.

Read more less

Lennox is a trusted leader in home convenience, delivering top-tier HVAC systems that combine efficiency, reliability, and innovation. Concentrated on energy savings and durability, Lennox products meet top residential heating and cooling standards. Whether upgrading or installing new, Lennox offers advanced solutions to keep your home comfortable year-round. What's Included: MLKC1 Condenser: The Lennox MLKC1 is a single-stage air conditioner condenser designed for reliable, energy-efficient cooling. Built with a durable cabinet and optimized for 14.3 SEER2 systems, it suits standard residential use. ML180UHV Furnace: The Lennox ML180UHV is an 80% AFUE single-stage furnace with a variable-speed blower motor, providing consistent airflow, improved temperature control, and quieter operation for better comfort. CK40HT Evaporator Coil: The Lennox CK40HT is a high-efficiency, all-aluminum cased coil for horizontal applications. Durable and corrosion-resistant, it pairs well with Lennox air conditioners and heat pumps for reliable performance. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas system Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line mounting Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will examine on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 3-Ton Bundle Cooling Efficiency (SEER2) 14.3 Condenser Model ML14KC1-036 Condenser Stages Single Furnace Model ML180UH070V36B Furnace Stages Single Furnace Efficiency 80% Furnace Capacity (BTU) 66k Furnace Cabinet Size B Heat Source Gas Coil Model CK40HT-42B Coil Cabinet Size B AHRI 215583016 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT BROCHURE

Read more less

The Goodman HVAC system offered by Manor Heat and Air combines an energy-efficient condenser, a reliable heating component, and a high-performance evaporator coil to provide consistent heating and cooling for small to medium-sized homes in Manor, TX. Engineered for durability and comfort, it ensures year-round indoor climate control. What's Included: Goodman GLXS4BA4810 Condenser: Goodman GLXS4B single-stage air conditioner rated up to 15.2 SEER2, with an energy-efficient compressor, copper tube/enhanced aluminum-fin coil, and factory-installed filter drier. Goodman GR9S800804CN Furnace: Goodman GR9S80 single-stage, multi-speed ECM, multi-position gas furnace at 80% AFUE, with a heavy-duty aluminized-steel dual-diameter tubular heat exchanger, hot-surface igniter, and self-diagnostic control board. Goodman CHPTA4830C3 Evaporator Coil: Goodman CHPTA/CAPTA cased upflow/downflow/horizontal evaporator coil with internal TXV, all-aluminum construction, and an insulated, compact cabinet for space-limited installations. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, your technician will note it on your estimate before work begins. SPECIFICATIONS Bundle Size/Tonnage 4 Ton Bundle Cooling Efficiency (SEER2) 14.5 SEER2 Condenser Model GLXS4BA4810 Condenser Stages Single Furnace Model GR9S800804CN Furnace Stage/Blower Single Furnace Efficiency 80% Furnace Capacity (BTU) 80K Furnace Cabinet Size C Heat Source Gas Coil Model CHPTA4830C3 Coil Cabinet Size C AHRI 214860130 Refrigerant R-32 Warranty 10-Year Parts (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY SPEC SHEET SPEC SHEET SPEC SHEET

Read more less

Lennox is a trusted leader in home comfort, delivering high-performance HVAC systems that combine efficiency, reliability, and innovation. Focused on energy savings and durability, Lennox products meet top standards in residential heating and cooling. Whether upgrading or installing new, Lennox offers advanced solutions to keep your home comfortable year-round. What's Included: MLKC1 Condenser: The Lennox MLKC1 is a single-stage air conditioner condenser designed for reliable, energy-efficient cooling. Built with a durable cabinet and optimized for 14.3 SEER2 systems, it suits standard residential use. ML196UH Furnace: The Lennox ML196UH is a high-efficiency, 96% AFUE single-stage gas furnace with a constant torque ECM motor. It provides dependable comfort, lower energy use, and quiet operation in a compact design. CK40HT Evaporator Coil: The Lennox CK40HT is a high-efficiency, all-aluminum cased coil for horizontal applications. Durable and corrosion-resistant, it pairs well with Lennox air conditioners and heat pumps for lasting performance. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas system Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (conventional composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and deliver a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of fitting. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 2-Ton Bundle Cooling Efficiency (SEER2) 14.3 Condenser Model ML14KC1-024 Condenser Stages Single Furnace Model ML196UH045XE36B Furnace Stages Single Furnace Efficiency 96% Furnace Capacity (BTU) 44K Furnace Cabinet Size B Heat Source Gas Coil Model CK40HT-24B Coil Cabinet Size B AHRI 215580732 Refrigerant R-454B Warranty 10 Year Pieces, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT BROCHURE

Read more less

The Goodman HVAC system offered by Manor Heat and Air combines an energy-efficient condenser, a reliable heating component, and a high-performance evaporator coil to provide consistent heating and cooling for small to medium-sized homes in Manor, TX. Engineered for durability and comfort, it ensures year-round indoor climate control. What's Included: Goodman GLXS4BA4810 Condenser: Goodman GLXS4B single-stage air conditioner rated up to 15.2 SEER2, with an energy-efficient compressor, copper tube/enhanced aluminum-fin coil, and factory-installed filter drier. Goodman GR9S800804CN Furnace: Goodman GR9S80 single-stage, multi-speed ECM, multi-position gas furnace at 80% AFUE, with a heavy-duty aluminized-steel dual-diameter tubular heat exchanger, hot-surface igniter, and self-diagnostic control board. Goodman CAPTA6030C3 Evaporator Coil: Goodman CHPTA/CAPTA cased upflow/downflow/horizontal evaporator coil with internal TXV, all-aluminum construction, and an insulated, compact cabinet for space-limited installations. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, your technician will note it on your estimate before work begins. SPECIFICATIONS Bundle Size/Tonnage 4 Ton Bundle Cooling Efficiency (SEER2) 14.5 SEER2 Condenser Model GLXS4BA4810 Condenser Stages Single Furnace Model GR9S800804CN Furnace Stage/Blower Single Furnace Efficiency 80% Furnace Capacity (BTU) 80K Furnace Cabinet Size C Heat Source Gas Coil Model CAPTA6030C3 Coil Cabinet Size C AHRI 214860131 Refrigerant R-32 Warranty 10-Year Parts (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY SPEC SHEET SPEC SHEET SPEC SHEET

Read more less

The Goodman HVAC system offered by Manor Heat and Air combines an energy-efficient condenser, a reliable heating component, and a high-performance evaporator coil to provide consistent heating and cooling for small to medium-sized homes in Manor, TX. Engineered for durability and comfort, it ensures year-round indoor climate control. What's Included: Goodman GLZS4BA4210 Heat Pump Condenser: Goodman GLZS4B single-stage heat pump delivering up to 15.2 SEER2 and 7.8 HSPF2, with an energy-efficient compressor, SmartShift technology for quiet, reliable defrost, and enhanced aluminum-fin coils. Goodman AMST42CU1300 Air Handler: Goodman AMST energy-efficient, multi-position, multi-speed ECM air handler with a factory-installed TXV, all-aluminum evaporator coil, optimized for pairing with single-stage AC or heat-pump condensers. Goodman HKTSD15XB Heat Kit: Goodman HKTSD electric heat kit accessory for AMST-series air handlers, factory-assembled and tested with plug-in wiring harness, sequencer staging, and a fuse-link high-temperature limit control. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Heat Pump Kit (Condenser + Air Handler & Heat Kit) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Electric heat kit factory-matched heat strip, field-installed and wired to OEM spec Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, your technician will note it on your estimate before work begins. SPECIFICATIONS Bundle Size/Tonnage 3.5 Ton Bundle Cooling Efficiency (SEER2) 14.3 SEER2 Condenser Model GLZS4BA4210 Condenser Stages Single Stage Air Handler Model AMST42CU1300 Air Handler Blower Constant Heat Kit Model HKTSD15XB Heat Source Heat Pump w/ Electric Backup AHRI 215213860 Refrigerant R-32 Warranty 10-Year Parts, 10-Year Compressor (When Registered with OEM) RESOURCES Condenser Air Handler LIMITED WARRANTY LIMITED WARRANTY SPEC SHEET SPEC SHEET

Read more less

Lennox is a trusted leader in home ease, delivering high-performance HVAC systems that combine efficiency, reliability, and innovation. Focused on energy savings and durability, Lennox products meet top standards in residential heating and cooling. Whether upgrading or installing new, Lennox offers advanced solutions to keep your home comfortable year-round. What's Included: MLKC1 Condenser: The Lennox MLKC1 is a single-stage air conditioner condenser designed for reliable, energy-efficient cooling. Built with a durable cabinet and optimized for 14.3 SEER2 systems, it suits standard residential use. ML180UHE Furnace: The Lennox ML180UHE is an 80% AFUE single-stage gas furnace with a constant torque ECM blower motor, offering reliable performance, improved airflow, and energy-conscious operation for standard-efficiency needs. CK40HT Evaporator Coil: The Lennox CK40HT is a high-efficiency, all-aluminum cased coil for horizontal applications. Durable and corrosion-resistant, it pairs with Lennox air conditioners and heat pumps for long-lasting performance. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included pieces Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas system Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, exchange, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your residence, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM elements warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 3.5-Ton Bundle Cooling Efficiency (SEER2) 14.3 Condenser Model ML14KC1-042 Condenser Stages Single Furnace Model ML180UH090E48B Furnace Stages Single Furnace Efficiency 80% Furnace Capacity (BTU) 88k Furnace Cabinet Size B Heat Source Gas Coil Model CK40HT-42B Coil Cabinet Size B AHRI 215584265 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT BROCHURE

Read more less

Lennox is a trusted leader in home well-being, offering excellent HVAC systems that combine efficiency, reliability, and innovation. Designed for energy savings and durability, Lennox products meet top residential heating and cooling standards. Whether upgrading or installing new, Lennox provides advanced solutions to keep your home comfortable year-round. What's Included: ML14KP1 Heat Pump Condenser: A high-efficiency unit with durable construction and advanced technology for quiet operation and consistent comfort in any climate. CBK45UHPT Air Handler: Designed for superior airflow and compatibility with the ML14KP1 condenser, featuring a corrosion-resistant aluminum coil for lasting performance and efficiency. ECB45 Heat Kit: Provides supplemental electric heating to ensure indoor comfort during colder months, enhancing system versatility and effectiveness. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Heat Pump System Kit(Condenser & Coil + Air Handler) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line (outdoor) filter drier, locking caps, ArmaFlex insulation Refrigerant line (indoor) bi-flow filter drier, ArmaFlex insulation Drainage & safety secondary drain pan, float switch, P-trap PVC fittings couplings, elbows, adapters for condensate line Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Units replacements are handled under the OEM components warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 3.5-Ton Bundle Cooling Efficiency (SEER2) 14.3 Condenser Model ML14KP1-042 Condenser Stages Single Air Handler Model CBK45UHPT-042 Air Handler Stages Single - 3-Speed Motor Air Handler Capacity 042K Air Handler Cabinet Size B Heat Source Electric Heat Kit Model ECB45-15CB AHRI Number 215739991 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM)

Read more less